SARGENT 8200 Lever Mortise Locksets Installation Guide
SARGENT 8200 Lever Mortise Locksets

STANDARD 8200 MORTISE LOCKSET SHOWN

Please Note: Refer to the following instruction sheets for complete lock installation.

  • LN or L Trim – A7035
  • LE or LW Trim – A7031
  • LS Trim – A7029
  • WT Trim – A7034

PARTS LIST DESCRIPTION

PARTS LIST DESCRIPTION

A.) Inside Trim Pack consisting of:

  1. Lever set screws (2) [1 long, 1 short]
  2. Lever Adapter
  3. Machine screws #8-32 x 5/8” (2)
  4. Adapter and plate assembly (2)
  5. Washers (2)
  6. Cap Nut
  7. Spindles (2)
    NOTE: Items 2, 4, 5 and 6 are pre-assembled when shipped.
    B.) Outside Trim Pack consisting of:
  8. Cap Nut
  9. Washers (2)
  10. Adapter and plate assembly
  11. Mounting Posts (2)
  12. Spindle Springs (2)
    C.) Complete trim pack consisting of: Both inside trim pack (A) and outside trim pack (B) together

Inside Lever Requirements/Specifications:

Inside Lever

Outside Lever Requirements/Specifications:

Outside Lever

IMPORTANT NOTE: UNLESS OTHERWISE SPECIFIED ALL TOLERANCE TO BE + OR – .005 LEVER WEIGHT AND CONFIGURATION (center of gravity – cg) MUST NOT APPLY A MAXIMUM LEVER TORQUE THAT EXCEEDS 1.4 in-lbs.

Copyright © 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

SARGENT Logo

Documents / Resources

SARGENT 8200 Lever Mortise Locksets [pdf] Installation Guide
8200 Lever Mortise Locksets, 8200, Lever Mortise Locksets, Mortise Locksets, Locksets

References

Leave a comment

Your email address will not be published. Required fields are marked *