Sunnydaze DECOR GSI-547 Copper Orb Outdoor Slate Fountain
Specifications
- Product Name: Copper Orb Outdoor Slate Fountain
- Model Number: GSI-547
- Warranty: 1 year
- Assembly: 2-person recommended
- Material: Slate
Product Usage Instructions
Assembly
- Place Pedestal Top (D) onto Pedestal Bottom (E).
- Gently set Basin (C) onto the pedestal and run the pump power cord down through the pedestal and under the groove in the back of the pedestal.
- Remove the nut from the Decorative Top (A). Then, use the nut to secure Plate (B) to the bottom of the decorative top.
- Connect the water tube on the pump to the decorative top and gently place it in the center of the basin.
- Fill the fountain with enough water to keep the pump fully submerged during operation.
- Plug the power cord into a properly grounded GFCI outlet.
- Rinse Decorative Stones (F) with clean water and gently place them inside the basin.
Care & Maintenance
- Inspect the fountain regularly for any signs of damage or wear.
- Clean the fountain and decorative stones periodically to prevent clogging and maintain optimal performance.
- Keep the water level adequate to ensure proper pump operation.
Troubleshooting
If you encounter any issues during assembly or notice damage upon delivery, contact customer service with your item number and order details for assistance.
FAQ
Q: Can I return the fountain if there are variations in slate colors and textures?
- A: No, variations in slate colors and textures are natural and not considered defects. Each fountain is unique due to the natural characteristics of slate.
Q: What should I do if there is air trapped in the pump when I first plug in the fountain?
- A: It may take a few moments for trapped air to escape. Allow the fountain to run for a bit, and the water flow should normalize as air is released from the pump.
- Review all assembly and care information before using this product. Save this manual for future reference.
- Select a smooth, level surface to place the fountain.
- Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
- Inspect packaging to ensure all parts are accounted for before disposing of packing materials.
- Save the packing slip.
| No. | Parts | Qty. |
| A | Decorative Top with M12 Nut | 1 |
| B | Plate | 1 |
| C | Basin w/ Built-in Electric Submersible Pump | 1 |
| D | Pedestal Top | 1 |
| E | Pedestal Bottom | 1 |
| F | Decorative Stones | 1 PK |
- IMPORTANT NOTES: Use care when unpacking and assembling this fountain. Each fountain is cut from large slabs of slate. Spalling (flaking) may occur naturally over time, and/or if slate is dropped.
- Slate is a natural product; the colors and texture of each piece are unique, and no two fountains will look the same. Variations in the slate colors and textures are not a cause for return.
ASSEMBLY
- Place Pedestal Top (D) onto Pedestal Bottom (E).
- Gently set Basin (C) onto the pedestal and run the pump power cord down through the pedestal and under the groove in the back of the pedestal.
- Remove the nut from the Decorative Top (A). Then, use the nut to secure Plate (B) to the bottom of the decorative top.
- Connect the water tube on the pump to the decorative top and gently place it in the center of the basin.
- Fill the fountain with enough water to keep the pump fully submerged during operation.
- Plug the power cord into a properly grounded GFCI outlet.
- Rinse Decorative Stones (F) with clean water and gently place them inside the basin.
NOTE: When first plugged in, there may be air trapped in the pump. It may take several moments for trapped air to escape, allowing water to flow.
Care & Maintenance
- For outdoor use only. Some splashing is normal; adjust the flow rate on the pump if the water rate is too high.
- Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to run dry as it will burn out the motor.
- Some climates and weather conditions increase water evaporation, requiring water to be added more frequently.
- Frequently check water levels during times of high temperatures, wind, and long-term exposure to direct sunlight to ensure the pump does not run dry.
- Only use water in this fountain. Distilled water will help prevent mineral buildup but is not required. Tap water is okay to use, but avoid heavily chlorinated water as it may damage the fountain and pump.
- Periodically change the water to keep the water, fountain, and pump clean. Remove scale and buildup regularly.
- DO NOT use harmful additives such as bleach, chlorine, etc. DO NOT use anything abrasive to scrub the fountain.
- DO NOT use a pressure washer.
- Always unplug the power supply before cleaning and maintaining the fountain and the recirculating pump.
- Take care when handling the pump; only pick it up by the body of the pump, never the power cord.
- During freezing weather, drain the fountain, disconnect the pump, and store it indoors; allowing ice to form may damage the fountain in such ways as, but not limited to, fountain cracking and/or permanent pump damage.
Troubleshooting
- If water is not flowing within several moments of the fountain being plugged in, the pump may have air bubbles in it, which can prevent water from circulating properly and can cause excess pump noise.
- Ensure that the pump is not suspended above the water. The pump must be fully submerged under the water.
- Check the flow control on the body of the pump, it may need to be adjusted to achieve the desired water flow rate.
- Inspect the pump and tubing for obstructions.
- Pump noise can be caused by trapped air, low water level, or the pump being too close to the sides of the fountain. Check the pump.
- If necessary, adding water or moving the pump helps to reduce noise.
- Check to make sure the power outlet is working; consult a certified electrician if in doubt about electrical connections.
- If you experience issues with assembly or the product was damaged during shipping, please contact our customer service team through one of the methods mentioned at the top of.
- Please have the item number and order information ready to expedite response time.
IMPORTANT SAFETY INFORMATION
- For outdoor use only.
- Keep the fountain out of reach of children and pets.
- Make sure the power cord is away from traffic areas.
- Keep the power cord away from all heat sources. Do not use electrical cords in areas with high temperatures.
- Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to run dry as it will burn out the motor.
- Always unplug the power supply before cleaning and maintaining the fountain and the recirculating pump.
- Take care when handling the pump; only pick it up by the body of the pump, never by the power cord.
- Any modification to the product or failure to follow recommended care will void the product warranty.
WARNING!
- Manufacturer and seller expressly disclaim all liability from personal injury, property damage, or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or neglect of this product.
- Purchase Date: / /————————————–
- Order/Customer Reference Number:—————————
- Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period.
- Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
- If you have any questions, comments, or concerns, feel free to contact us by phone at 833-982-1977, by email: at customerservice@sunnydazedecor.com, or via our Contact Us page at https://tiny.cc/SunnydazeContact
Documents / Resources
 |
Sunnydaze DECOR GSI-547 Copper Orb Outdoor Slate Fountain [pdf] Instruction Manual GSI-547, GSI-547 Copper Orb Outdoor Slate Fountain, Copper Orb Outdoor Slate Fountain, Orb Outdoor Slate Fountain, Outdoor Slate Fountain, Slate Fountain, Fountain |
Contact Us – Sunnydaze Decor 