WS-1200
USER’S MANUAL
WS-1200 Wireless Thermometer Clock Rain Temperature Sensor
Thermometer with clock and wireless rain unit with temperature sensor
OVERVIEW
| 1. Time display 2. Rainfall amount (12h) 3. Icon connection rain unit 4. Outside temperature in ºC of ºF 5. Outside humidity 6. Alarm clock icon |
7. Date display 8. Rainfall amount 9. Indoor temperature in ºC of ºF 10. Indoor humidity 11. Set function 12. Plus function 13. Minus function |
14. rain gauge with integrated thermometer
INSTALLATION
The outdoor unit can be fastened outside in an open place to a horizontal object, e.g. the top of a wall, beam or board. The rain tray must stand firm so that the wind has no influence.
Advice, first register the outdoor unit with the indoor unit and only then place it in its permanent location outdoors. The outdoor unit records the amount of rain and measures the outside temperature. Because the temperature sensor is located in the plastic housing, it is possible that when the tray is in full sunlight, the indicated temperature reads higher than the actual temperature.
outdoor unit batteries installation:
Remove the upper part of the base plate.
Once the lid has been removed, the battery cover can be removed.
Insert the batteries 2 x AAA 1.5V Alkaline in the battery compartment.
Pay attention to the polarity. Replace the cover.
Because the rain unit and indoor unit work with a unique code, the indoor unit must be powered on as soon as possible after the batteries have been installed in the outdoor unit. The code will be synchronized within the first 10 minutes.
Indoor unit:
Insert 2 AAA 1.5-volt alkaline batteries with the correct polarity in the battery compartment of the indoor unit. The indoor unit will beep after installation.
After installing the batteries in the indoor unit, an attempt will be made to contact the outdoor unit for synchronization. Once successful, the outside temperature and the amount of rain (normally 0) will appear.
During reception, the icon “
” will appear
It is recommended not to press any key for the first 5 minutes due to the synchronization.
If the outdoor temperature does not appear after 5 minutes, repeat the registration procedure.
TAKE NOTE: do not press any keys during the registration procedure.
DISPLAY
General:
The actual temperature is displayed correctly after several hours.
SETTING THE INDOOR UNIT
Time and date:
Through the steps below it is possible to set and change the date and time.
Do not set the time until the indoor unit and outdoor unit have connected.
Use the “SET” button to switch between the alarm and the time display.
Make sure the weather station displays the time. This can be recognised by the blinking : between the hour and minute notation.
- Keep your finger on the “SET” key for 3 seconds to enter the settings menu.
- Press “+” or “-” key to switch between 24 hour and 12 hour format.
- Press the “SET” key to confirm the selection.
- Press the “+” or “-” key to set the correct hour.
- Press the “SET” key to set the minutes.
- Press the “+” or “-” key to set the correct minutes.
- Press the “SET” key to set the year.
- Press the “+” or “-” key to set the correct year.
- Press the “SET” key to set the month.
- Press the “+” or “-” key to set the correct month.
- Press the “SET” key to set the date.
- Press the “+” or “-” key to set the correct date.
- Press the “SET” key to confirm the entry and return to the default screen.
- Press the “+” key to change between ºC or ºF in the default screen.
Pressing the “+” or “-” key for longer than 3 seconds will change the values in larger increments.
Set and activate alarm clock or alarm.
The WS-1200 has an alarm clock function. After setting, 1 wake-up time can be activated. The alarm will sound at that time.
Use the “SET” button to switch between the alarm and the time display.
Make sure the weather station displays the alarm time. This can be recognized by the solid : between the hour and minute notation.
- Press the “SET” key and hold it for at least 3 seconds until the alarm time hours start to flash.
- Press the “+” or “-” key to set the correct hour.
- Press the “SET” key to set the minutes.
- Press the “+” or “-” key to set the correct minutes.
- Press the “SET” key to exit the program mode or wait 10 seconds.
The alarm has been set. If the alarm function has been activated you will se a bell icon in position 6 of the indoor screen.
To activate the alarm, press the “-” key.
To deactivate the alarm, press the “-” key.
When the alarm sounds, it will generate a beeping tone for 60 seconds.
After 1 minute, the alarm signal will stop and the alarm will be set for the next alarm time in 24 hours.
Press any key to stop the alarm sooner.
PLACEMENT TIPS
- Do not place the indoor unit in direct sunlight and keep away from heat-emitting objects. (lamps, heaters, etc.)
- To ensure proper reception of the radio-controlled time signals, do not place the outdoor unit next to large metal surfaces or heavy electrical appliances
- Depending on the local conditions, the range between the outdoor unit and indoor unit will vary. Before mounting the outdoor unit permanently, check for a constant connection between the outdoor unit and indoor unit. Then mount the outdoor unit securely.
- The distance between the indoor and outdoor unit must not exceed 30 meters
RESETTING THE RAINFALL VALUE
The indoor unit displays the registered rainfall on the screen (8) + (2). The mm/h value (8) is the accumulated value of the rain since the beginning of measuring or the last reset. The graph (2) gives an overview of the hourly rainfall over the last 12 hours.
To reset the rainfall value, press the MIN (-) button twice as described below.
- Press the MIN (-) button once briefly for <1 second.
- Immediately after releasing the button, press and hold the MIN (-) button for 3 seconds.
The rain value is now set to 0 and the indoor unit is reconnecting (Synchronizing) with the rain unit. Make sure the indoor unit is within 30 meters of the rain unit during synchronization.
RESET/SYSTEM MALFUNCTION
If you have lost the overview of the settings or the WS-1200 indicates a possible malfunction, it may be advisable to reset the indoor and rain unit.
- Remove the batteries from the indoor and from the rain unit. Wait at least 10 seconds. Then replace the batteries or replace them with new ones. then see INSTALLATION. If this does not solve the problem, please contact the Alecto customer service on telephone number +31 (0) 73 6411 355
MAINTENANCE
Clean the indoor unit regularly with a slightly damp cloth.
Clean the rain unit on the outside with a slightly damp cloth. Make sure that all holes on the outside (top and bottom) are open. Make sure the surface of the rain collector is completely clean. Open the rain unit by gently pressing the cover on the side and pulling it upwards.
Clean the inside of the rain unit of deposits, dirt and insects. Make sure the rocker shaft is clean so that the rocker can move freely. After cleaning, place the cover back on the rain meter
SPECIFICATIONS
Indoor unit:
indoor temperature measurement range:
0°C ~ +50°C
resolution: 0.1°C
accuracy: 0°C – 40°C: 1°C 40°C – 50°C: 2°C
measuring range within humidity
20%RH to 95%RH
resolution: 5%
accuracy: 40% – 80%: 5%
30% – 40% & 80% – 90%: 8%
20% – 30% & 90% – 95%: N/A
alarm time: maximum 60 seconds
Rain unit:
open field range: maximum 30 meters
transmission frequency: 433.9MHz ± 250KHz
Maximum Power: < -14.95 dBm
outdoor temperature range: -20°C ~ +70°C
resolution: 0.1° C
accuracy: 0°C – 40°C: 1°C
-20°C – 0°C & 40°C – 70°C: 2°C
measuring range within humidity 20%RH to 95%RH
resolution: 5%
accuracy: 40% – 80%: 5%
30% – 40% & 80% – 90%: 8%
20% – 30% & 90% – 95%: N/A
precipitation volume: 0 – 19.999mm
measurement interval rain unit: 48 seconds
waterproof grading: IPX3
power consumption: 15mA (during transmission), 10µA (standby)
Power supply:
Indoor unit
2 x 1.5V LR03 battery, size AAA, alkaline
rain unit
2 x 1.5V LR03 battery, size AAA, alkaline
battery use:
Minimum 12 months for indoor and outdoor unit
DECLARATION OF COMPLIANCE
Commaxx hereby declares that the radio equipment type Alecto WS-1200 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of compliance can be consulted at the following internet address:
http://DOC.hesdo.com/WS-1200-DOC.pdf
ENVIRONMENT
At the end of its lifespan, this product should not be discarded as normal domestic waste, but is must be taken to a collection point for the recycling of electric and electronic equipment.
Don’t throw away exhausted batteries, take them to your local depot for small chemical waste
WARRANTY CARD
| Name: Address: Zip: Place: Phone: |
Save your cash register or purchase receipt here |
On the Alecto WS-1200 you have a warranty of 24 MONTHS from the date of purchase. During that period, we guarantee the free repair of defects due to material and manufacturing faults. This is at the final discretion of the importer.
HOW TO ACT:
If you notice a defect, first consult this manual or the Alecto website. If these do not provide a definite answer, please consult the supplier of this weather station. In the event of a defect, you can return the weather station with a comprehensive complaint description and a dated purchase receipt to your supplier. The latter will arrange for an urgent repair or shipping to the importer.
WARRANTY VOID:
Incorrect use, incorrect connection, leaking and/or incorrectly installed batteries, use of non-original parts or accessories, neglect and defects caused by moisture, fire, flood, lightning and natural disasters. In case of unauthorized modifications and/or repairs by third parties. Incorrect transportation of the appliance without suitable packaging and if the appliance is not accompanied by this warranty certificate and the purchase receipt.
Any further liability, especially for any consequential damage, is excluded.
WWW.ALECTO.NL
SERVICE@ALECTO.NL
Commaxx B.V.
Wiebachstraat 37
6466 NG, Kerkrade
The Netherlands
Documents / Resources
 |
Alectao WS-1200 Wireless Thermometer Clock Rain Temperature Sensor [pdf] User Manual WS-1200 Wireless Thermometer Clock Rain Temperature Sensor, WS-1200, Wireless Thermometer Clock Rain Temperature Sensor, Clock Rain Temperature Sensor, Rain Temperature Sensor, Temperature Sensor, Sensor |
Alecto.nl | 45+ jaar een betrouwbaar merk voor Consument Elektronica 