VICTROLA VPT-1500 Wireless Record Player User Guide

VICTROLA VPT-1500 Wireless Record Player

TURNTABLE SETUP

SET THE SLIPMAT ASIDE AND PLACE THE PLATTER ONTO THE TURNTABLE.
ROTATE THE PLATTER UNTIL THE HOLE WITH THE GUIDE STRING IS DIRECTLY OVER THE MOTOR SPINDLE AS SHOWN.

CAREFULLY REMOVE THE TAPED GUIDE STRING AND USE THE STRING TO STRETCH THE BELT OVER THE MOTOR SPINDLE.
ONCE THE BELT IS INSTALLED AROUND THE MOTOR SPINDLE, DISCARD THE GUIDE STRING AND PLACE THE SLIPMAT ON THE PLATTER.

INSERT THE HEADSHELL INTO THE TONEARM AND TIGHTEN THE TONEARM COLLAR COUNTER-CLOCKWISE UNTIL THE HEADSHELL IS SECURE.

ORTOFON 2M SERIES:
(VPT-2500)
PUSH THE STYLUS COVER TAB DOWN / FORWARD AND GENTLY SLIDE THE COVER OFF.

AUDIO TECHNICA VM95 SERIES:
(VPT-1500)
GENTLY PULL THE COVER OFF OF THE CARTRIDGE.

SLIDE THE COUNTERWEIGHT ONTO THE TONEARM UNTIL THE FRONT OF THE COUNTERWEIGHT IS ALIGNED WITH THE BACK GROOVE ON THE TONEARM.
Note: Remove the two foam blocks from the tonearm before installing the counterweight.

ONCE ALIGNED WITH THE CORRECT GROOVE, TURN THE TOP SCREW CLOCKWISE TO TIGHTEN THE COUNTERWEIGHT.
Note: You may need to adjust the anti-skate if you notice distortion, skipping, or looping during playback.

USE THE SPEED SELECTOR KNOB TO SELECT YOUR RECORD SPEED.
PLACE THE 45 RPM ADAPTER ON THE SPINDLE NEXT TO THE SPEED CONTROL TO STORE WHEN NOT IN USE.

OPERATION GUIDE

POWER ON single press button
SWITCH OUTPUT single press button switch between RCA output and Bluetooth output
POWER OFF press and hold button (1 sec)

LED COLOR GUIDE

RCA MODE flashes white (3x) then solid white
BLUETOOTH MODE Ready To Pair flashing blue Connected solid blue (2 sec) then solid white

Documents / Resources

VICTROLA VPT-1500 Wireless Record Player [pdf] User Guide VPT-1500, VPT-2500, VPT-1500 Wireless Record Player, VPT-1500, Wireless Record Player, Record Player, Player

References

• User Manual