LUXOMAT PD11-LTMS-RR-FP Ultra Flat Multi Function False Ceiling Sensor
Product Specifications:
- Product Code: PD11-LTMS-RR-FLAT-DE
- Remote control-capable Multi-sensor
- Acquisition of data concerning occupancy (presence), temperature, and brightness
- Output of current light and temperature values shown as analogue voltage (Lux & Temp)
- Potential-free reed relay (NO contact) for presence detection
Product Usage Instructions
Safety Instructions:
Work on the mains supply may only be carried out by qualified\ professionals or instructed persons under supervision. Disconnect\ supply before installing. Avoid parallel routing of cables to power cables.
Functionality:
The device is a remote control-capable Multi-sensor for acquisition of data concerning occupancy (presence), temperature, and brightness. Output of light and temperature values is shown as analogue voltage. Presence detection is done through a potential-free reed relay.
Additional functions can be accessed with the remote control.
Mounting Instructions:
For mounting in luminaires, use the enclosed clamping ring and remove the spring clips. Exclude sources of interference. The detection area can be adjusted using the enclosed blinds if needed.
FAQ
- Q: Can I install this device myself?
- A: Work on the mains supply should only be done by qualified professionals or under their supervision to ensure safety.
- Q: How can I limit the detection area of the sensor?
- A: The detection area can be reduced or limited by using the enclosed blinds are provided with the product.
Safety instructions
Work on the mains supply may only be carried out by qualified professionals or by instructed persons under the direction and supervision of qualified skilled electrical personnel in accordance with electrotechnical regulations
Disconnect supply before installing! This device is not to be used to isolate other equipment from the mains supply.
Avoid parallel routing of cables to power cables. If separate routing is not possible, the use of shielded cables is recommended.
Read this supplementary sheet and the operating instructions before putting the device into operation. Knowledge of these documents is part of the intended use
Operation
The device is a remote control-capable Multi-sensor for acquisition of data concerning occupancy (presence), temperature, and brightness. The output of current light and temperature values is shown as analogue voltage (Lux & Temp). To detect presence, the Multi- sensor has a potential-free reed relay (NO contact), which closes when the movement is detected.- Further functions can be accessed with our remote control (see accessories).
Montage
Mounting hints
- For mounting in luminaires, use \the enclosed clamping ring and remove the spring clips.
Exclude sources of interference
- In case the detection area of the detector is too large or areas are being covered that should not be monitored, the range can be reduced or limited by using the enclosed blinds (a).
Self-test cycle
- The product enters an initial 60-second self-test cycle when the supply is first connected (LEDs flash). During this time the device does not respond to movement.
LED function indicators after each mains recovery
Standard mode
- Detector programmed
- red flashes quickly (2x/sec.)
- Detector not programmed
- red flashes (1x/sec.)
LED function indicators
- Motion detection
- red flashes
Technical data
Wiring diagram
Schematic diagram – when connecting the detector, please respect the labelling of the terminal connections at the device
- X1 / X2 / X3/ Evaluation units/devices
Accessory
| 93067 | BLE-IR-Adapter |
| 92833 | In-wall mounting set / PD11 |
| 92537 | Cover ring PD11 black glossy, similar to RAL9011 |
| 92692 | Cover ring PD11 white mat, similar to RAL9010 |
| 92994 | Square design frame PD11-FC |
| UK Declaration of Conformity | |
|
|
This product respects the directives concerning
1. Electrical Equipment Safety Regulation 2016 2. Electromagnetic Compatibility Regulation 2016 3. The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulation 2012 |
| Contact | |
| B.E.G. UK Ltd., Apex Court – Grove House • Camphill Road • West Byfleet, Surrey KT14 6SQ | |
 |
Product pages on the Internet |
Brück Electronic GmbH I Gerberstr. 33 I
- 51789 Lindlar
- GERMANY
- Phone: +49 (0) 2266 90121-0
- support@beg.de
- beg-luxomat.com
Documents / Resources
 |
LUXOMAT PD11-LTMS-RR-FP Ultra Flat Multi Function False Ceiling Sensor [pdf] Instruction Manual PD11-LTMS-RR-FP Ultra Flat Multi Function False Ceiling Sensor, PD11-LTMS-RR-FP, Ultra Flat Multi Function False Ceiling Sensor, Multi Function False Ceiling Sensor, Function False Ceiling Sensor, False Ceiling Sensor, Ceiling Sensor |
