NINJACREAMi™
NINJA NC301C Series Ice Cream Maker

Quick start guide

Please make sure to read the enclosed safety instructions prior to using your unit.

Perfectly personalized ice cream

PREP: 5 minutes
FREEZE: 24 hours
PROGRAM TIME: 1 1/2 minutes
MAKES: 4 servings

INGREDIENTS

1 tablespoon (18 g) cream cheese
70 g granulated sugar
180 ml heavy cream
Flavoring, 1 teaspoon extract of your choice
OR 2 tablespoons of cocoa powder
240 ml whole milk
40 g of your favorite mix-ins (optional)

PICK YOUR FLAVOR

Cocoa powder
PICK YOUR FLAVOR

Vanilla extract
PICK YOUR FLAVOR

Mint extract
PICK YOUR FLAVOR

Almond extract
PICK YOUR FLAVOR

Fruit extract
PICK YOUR FLAVOR

MAKE IT DAIRY-FREE Use vegan cream cheese for cream cheese, unsweetened coconut cream for heavy cream, and unsweetened oat milk for milk. Whisk the coconut cream until smooth, then add the remaining ingredients.

Microwave the cream cheese for 10 seconds.
Add sugar and flavor, then whisk the mixture until it looks like frosting.
MAKE IT DAIRY-FREE

Slowly mix in heavy cream and milk until sugar is dissolved.
MAKE IT DAIRY-FREE

Pour base into CREAMi™ Pint. Place lid on pint and freeze for 24 hours.
MAKE IT DAIRY-FREE

Remove lid from frozen pint.
Refer to next page for Assembly & Process instructions.
Select ICE CREAM.
MAKE IT DAIRY-FREE

PICK YOUR MIX-INS TO ADD A PERSONAL TOUCH

1/4 cup of your favorite crushed candies, frozen fruits, chopped nuts, chocolate pieces, and more.
PICK YOUR MIX-INS TO ADD A PERSONAL TOUCH

With a spoon, create a 4 cm wide hole that reaches the bottom of the pint.
Add mix-ins to the hole in the pint and process again using the MIX-IN program.
PICK YOUR MIX-INS TO ADD A PERSONAL TOUCH

Assembly & Process

    1. Plug in unit first
      The unit will NOT run if the outer bowl is installed before the unit is plugged in.
      Assembly & Process
    2. Install
      CREAMi™ Pint Remove lid from pint and check that the ingredients have not been frozen at an angle. Place the pint containing the frozen base in the outer bowl.
      Assembly & Process
    3. Install
      Creamerizer™ Paddle Press and hold the paddle latch on the top of the outer
      bowl lid, then insert the paddle in the bottom of the lid. Release the latch to secure the paddle.
      Assembly & Process
    4. Install lid
      Position the tab of the lid just slightly to the right of the outer bowl handle so the lines on the lid and handle align. Rotate the lid clockwise to lock.
      NOTE If programs will not illuminate, make sure the unit is properly assembled.
      See the troubleshooting section of the safety instructions if install light is illuminated.
      Assembly & Process
    5. Install outer bowl
      After plugging in the unit, place the outer bowl on the base with the handle in the middle of the unit.
      Twist handle to the right to raise the platform and lock the bowl in place. You should hear a click.
      Assembly & Process
    6. Select program
      Press the power button, then select the program that suits your recipe.
      Assembly & Process
    7. Remove bowl
      When program ends, hold the release button on the left of the motor base and twist bowl handle clockwise to remove.
      Assembly & Process
    8. Remove lid
      Press the lid unlock button and twist to remove lid.
      Assembly & Process
    9. If adding mix-ins, use a spoon to create a 4 cm wide hole that reaches the bottom of the pint.
      Add chopped or broken mix-ins to the hole in the pint and process again using the MIX-IN program.
      Assembly & Process
      If not adding mix-ins, RE-SPIN can be used on a crumbly or powdery pint to make it creamy.
      RE-SPIN is often needed for very cold bases.
      DO NOT RE-SPIN before using MIX-IN program.

Disassembly & Cleaning

Remove pint & paddle
Lift the pint out of the outer bowl.
Rinse the outer bowl lid to remove any sticky residue or pieces wedged in the paddle.
Then remove the paddle by pressing the paddle latch on top of the lid.
All parts are dishwasher safe (top rack only) and can also be hand-washed.
Remove pint & paddle

Outer bowl lid
locks Creamerizer Paddle in place
Outer bowl lid

Creamerizer™ Paddle
This dual functioning paddle finely shaves and mixes frozen ingredients into the creamiest treats.

CREAMi™ Pints & Lids
BPA-free pints and lids for making and storing CREAMi treats.
CREAMi™ Pints & Lids

Outer bowl
securely holds the pint in place during processing.

Customer service

GET HELP RIGHT NOW!
DON’T RETURN TO THE STORE.
Questions or Problems?

CALL US:
1-855-520-7816
Toll-free customer support line

Scan the code for online help, FAQs, recipes, and more.
Qr. ninjakitchen.com/creami-caQR CODE Icon

NINJA© 2021 SharkNinja Operating LLC.
CREAMERIZER, CREAMI, and NINJA are trademarks of SharkNinja Operating LLC.
PHILADELPHIA is a registered trademark of Kraft Foods, used with permission.
NC300Series_QSG_MP_Mv28

Documents / Resources

NINJA NC301C Ice Cream Maker [pdf] User Guide
NC301C, NC301C Ice Cream Maker, Ice Cream Maker, Cream Maker, Maker

References

Leave a comment

Your email address will not be published. Required fields are marked *