BOSCH HGA120B51M Free standing Gas cooker Freestanding Electric Ceramic Cooker Stainless Steel User Manual

BOSCH HGA120B51M Free standing Gas cooker Freestanding Electric Ceramic Cooker Stainless Steel

Product Information

The Free standing cooker model HGA120B51M is designed for cooking purposes and comes with safety features to ensure proper and safe usage.

Specifications

• Product: Free standing cooker
• Model: HGA120B51M
• Language: English

Product Usage Instructions

Safety Instructions:

It is important to follow the safety instructions provided to prevent any accidents or damage. Some key safety points include:

1. Read the information on intended use to ensure correct and safe appliance usage.
2. Be cautious of gas leaks and follow the necessary steps if gas is detected.
3. Avoid keeping combustible objects under or near the appliance to prevent fire hazards.

Preventing Material Damage:

To prevent material damage, ensure that the appliance is used according to the manufacturer’s guidelines. Avoid using the appliance in ways that may cause damage to its components.

Environmental Protection and Saving Energy:

The appliance is designed with energy efficiency in mind. Follow the provided guidelines to save energy and contribute to environmental protection.

FAQs

• Q: What should I do if I detect a gas leak?
  • A: If you smell gas or suspect a gas leak, immediately shut off the gas supply, extinguish any naked flames, ventilate the room, and contact the after-sales service or gas supplier for assistance.
• Q: Can I use combustible materials near the appliance?
  • A: It is recommended not to keep combustible objects or materials near the appliance to prevent fire hazards. Always maintain a safe distance between the appliance and any flammable items.

“`

boMsgecywRnthBefeeo-rwhegslcecoidsohbmetmevneeinocree.wecfyiooaotnsnum:dr /

Free standing cooker

HGA120B51M

[en]

User manual and installation instructions

Safety

Observe the following safety instructions. 1.1Intended use Read the information on intended use to ensure that you use the appliance correctly and safely. Appliance class: Class 1
2

The figures in these instructions are intended for information purposes. ATTENTION: Observe the applicable regulations and only set up the appliance in wellventilated rooms. Read through the instructions before setting up and using the appliance. Warning: The appliance is only used for cooking. Do not use the appliance for other purposes, e.g. for heating up rooms. Only allow a trained professional to connect the appliance and to convert the appliance to a different type of gas. The appliance must be installed and the electric and gas connections must be implemented in accordance with the instruction and installation manual. An incorrect connection or incorrect settings may lead to serious accidents and damage to the appliance. The appliance manufacturer accepts no liability for damage of this kind. The appliance’s warranty becomes void. Only a licensed professional may connect appliances without plugs. Damage caused by incorrect connection is not covered under the warranty. Only use the appliance as follows: ¡ To prepare meals and drinks. ¡ Under supervision. Never leave the appli-
ance unattended when cooking for short periods. ¡ in private households and in enclosed spaces in a domestic environment. ¡ up to an altitude of max. 2000 m above sea level. Do not use the appliance: ¡ On boats or in vehicles. ¡ as a room heater. ¡ with an external timer or a remote control. Call the after-sales service if you want to convert your appliance to a different type of gas. You cannot operate the appliance with a timer or remote control. Always place accessories in the cooking compartment the right way round.

1.2Restriction on user group This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers. Do not let children play with the appliance. Children must not perform cleaning or user maintenance unless they are at least 15 years old and are being supervised. Keep children under the age of 8 years away from the appliance and power cable.
1.3Safe use WARNING Risk of explosion!
Escaping gas may cause an explosion. WHAT TO DO IF YOU SMELL GAS OR IF THERE ARE FAULTS IN THE GAS INSTALLATION Immediately shut off the gas supply or
close the gas cylinder valve. Immediately extinguish all naked flames
and cigarettes. Do not operate any light switches or appli-
ance switches. Do not pull any plugs out of any sockets. Do not use any telephones or mobile
phones within the building. Open windows and ventilate the room. Call the after sales service or the gas sup-
plier. Escaping gas may cause an explosion. Small amounts of gas can collect over a longer period of time and ignite. Close the safety valve for the gas supply
when the appliance is out of use for prolonged periods. Escaping gas may cause an explosion. If the liquefied gas bottle is not upright, liquefied propane/butane can enter the appliance. Intense darting flames may therefore escape from the burners. Components may become damaged and start to leak over time so that gas escapes uncontrollably. Always use liquefied gas bottles in an upright position.

Safetyen
Escaping gas may cause an explosion. If the gas pressure in your distributing pipes is more than 20% higher than the values specified on the appliance’s rating plate, a gas leak can occur. For your own safety, it is imperative that
you operate the appliance with a suitable gas governor. If you do not know what the gas pressure in your gas distributing pipes is, please ask your local gas company. Connection, maintenance and setting of the gas governor must be carried out by an authorised installation specialist.
WARNING Risk of poisoning! Using the gas cooking appliance leads to a build-up of heat, moisture and combustion products in the room where the appliance is installed. Ensure that the kitchen is sufficiently ventil-
ated, in particular when operating the gas cooking appliance. If the appliance is used intensively and for prolonged periods, ensure that there is additional ventilation so that the combustion products are safely fed to the outside, e.g. if using existing ventilation equipment, set a higher performance level and, at the same time, ensure that the air is replaced with fresh air in the room where the appliance is installed. Consult specialist personnel when installing additional ventilation equipment.
WARNING Risk of fire! The appliance will become hot. Do not keep combustible objects or aero-
sol cans in drawers directly underneath the hob. Never store or use combustible materials (e.g. spray cans or cleaning agents) under the appliance or in its immediate vicinity. Hob covers can cause accidents, for example due to overheating, catching fire or materials shattering. Do not use hob covers.

3

enSafety
The appliance becomes very hot, fabrics and other objects may ignite. Keep fabrics (e.g. garments or curtains)
away from the flames. Never reach over the flames. Do not place combustible objects (e.g. tea
towels or newspapers) on, next to or behind the appliance. Escaping gas may ignite. If the burner does not ignite after 15 seconds, turn the control knob to the “Off” position and open the door or window in the room. Do not attempt to re-ignite the burner for at least one minute. In the event of the burner flames being accidentally extinguished, turn off the burner control. Do not attempt to re-ignite the burner for at least one minute. Opening the appliance door creates a draught. Greaseproof paper may come into contact with the heating element and catch fire. Never place greaseproof paper loosely over accessories when preheating the appliance and while cooking. Always cut greaseproof paper to size and use a plate or baking tin to hold it down. Combustible objects that are left in the cooking compartment may catch fire. Never store combustible objects in the cooking compartment. The rear of the appliance becomes very hot. This may cause damage to the power cables. Electricity and gas lines must not come into contact with the rear of the appliance. Food may catch fire. The cooking process must be monitored. A short process must be monitored continuously. When gas burners are in operation without any cookware placed on them, they can build up a lot of heat. The extractor hood above it may become damaged or catch fire. Only operate the gas burners with cookware on them. Loose food remnants, fat and meat juices may catch fire. Before using the appliance, remove the worst of the food residues and remnants from the cooking compartment, heating elements and accessories.

Overheating of the appliance may cause a fire. Never install the appliance behind a decor-
ative door or unit door. It is dangerous to use an extended power cord and non-approved adapters. Do not use extension cables or multiple
socket strips. Only use adapters and power cords ap-
proved by the manufacturer. If the power cord is too short and a longer
one is not available, please contact an electrician to have the domestic installation adapted.
WARNING Risk of burns! The accessible parts can become hot during operation. Small children should be kept away from
the appliance. Hob protective grilles may cause accidents. Never use hob protective grilles. Accessories and cookware get very hot. Always use oven gloves to remove ac-
cessories or cookware from the cooking compartment. Empty cookware becomes extremely hot when set on gas burners that are operating. Never heat up empty cookware. The appliance becomes hot during operation. Allow the appliance to cool down before cleaning. When the cooking compartment is hot, any alcoholic vapours inside may catch fire. Only use small quantities of drinks with a high alcohol content in food. Open the appliance door carefully. The appliance and its parts that can be touched become hot during use. Caution should be exercised here in order to avoid touching heating elements. Young children under 8 years of age must be kept away from the appliance. Accessible points may be hot when using the grill. Keep small children away from the appliance.

4

When the cooking compartment is hot, any alcoholic vapours inside may catch fire. The appliance door may spring open. Hot steam and jets of flame may escape. Only use small quantities of drinks with a
high alcohol content in food. Do not heat spirits ( 15% vol.) when undi-
luted (e.g. for marinating or pouring over food). Open the appliance door carefully.
WARNING Risk of electric shock! Improper repairs are dangerous. Repairs to the appliance should only be
carried out by trained specialist staff. Only use genuine spare parts when repair-
ing the appliance. If the power cord of this appliance is dam-
aged, it must be replaced by the manufacturer, the manufacturer’s Customer Service or a similarly qualified person in order to prevent any risk. If the appliance or the power cord is damaged, this is dangerous. Never operate a damaged appliance. Never operate an appliance with a cracked or fractured surface. Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains. If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box and turn off the gas supply. Call customer services. Page 25 An ingress of moisture can cause an electric shock. Do not use steam- or high-pressure cleaners to clean the appliance. The insulation on cables of electrical appliances may melt if it touches hot parts of the appliance. Never bring electrical appliance cables into contact with hot parts of the appliance. If the insulation of the power cord is damaged, this is dangerous. Never let the power cord come into contact with hot appliance parts or heat sources. Never let the power cord come into contact with sharp points or edges. Never kink, crush or modify the power cord.

Safetyen
WARNING Risk of injury! Faults or damage to the appliance and repairs that have not been carried out correctly are dangerous. Never switch on the appliance if there is a
fault with it. If the appliance is faulty, unplug the mains
plug or switch off the fuse in the fuse box. Shut off the gas supply and call the after sales service. Always have repairs carried out to the appliance and damaged gas lines replaced by trained, specialist personnel. Cookware that is not the right size, or that is damaged or incorrectly positioned may cause serious injuries. See the notes on cookware. When switching on the burner, sparks are generated in the ignition plugs. Never touch the ignition plugs while the burner is being lit. A scratched upper glass cover may break and fragment. Do not use a glass scraper or any harsh or abrasive cleaning products. The hinges on the appliance door move when the door is opened and closed, which could trap your fingers. Keep your hands away from the hinges. Scratched glass in the appliance door may develop into a crack. Do not use any harsh or abrasive cleaners or sharp metal scrapers to clean the glass on the oven door, as they may scratch the surface. If you leave the appliance door open, people may bump into it, resulting in injury. Always keep the appliance door closed during and after operation. The appliance and its parts that can be touched may have sharp edges. Take care when handling and cleaning them. If possible, wear protective gloves.
WARNING Risk of scalding! The accessible parts of the appliance become hot during operation. Never touch these hot parts. Keep children at a safe distance.

5

enPreventing material damage
Hot steam may escape when you open the appliance door. Steam may not be visible, depending on the temperature. Open the appliance door carefully. Keep children at a safe distance. If there is water in the cooking compartment when it is hot, this may create hot steam. Never pour water into the cooking compart-
ment when the cooking compartment is hot.
WARNING Risk of suffocation! Children may put packaging material over their heads or wrap themselves up in it and suffocate. Keep packaging material away from chil-
dren. Do not let children play with packaging ma-
terial. Children may breathe in or swallow small parts, causing them to suffocate. Keep small parts away from children. Do not let children play with small parts.
WARNING Risk of tipping! If the appliance is placed on a base and is not secured, it may slide off the base.

1.4Glass cover WARNING Risk of injury!
The glass cover may crack due to heat.
Before closing the cover, switch off all of the burners.
Wait until the oven has cooled down before closing the glass cover.
Before opening the top cover, remove any spills with a cloth and dry the cover.
1.5Plinth drawer WARNING Risk of fire!
The surfaces of the plinth drawer may become very hot. Only store oven accessories in the drawer. Do not keep any flammable or combustible
objects in the plinth drawer.

Connect the appliance securely to the base.
Warning: To prevent the appliance from tipping over, attach a compensation device.
Observe the instructions for the installation.

Preventing material damage

Preventingmaterialdamage
2.1Oven area
Follow the corresponding instructions when using the oven. ATTENTION! Objects on the cooking compartment floor at over 50 °C will cause heat to build up. The baking and roasting times will no longer be correct and the enamel will be damaged. Do not place any accessories, greaseproof paper or
foil of any kind on the cooking compartment floor. Only place cookware on the cooking compartment
floor if a temperature above 50 °C has been set.

If aluminium foil comes into contact with the door pane, it could cause permanent discolouration. Do not allow aluminium foil in the cooking compart-
ment to come into contact with the door pane. When the cooking compartment is hot, any water inside it will create steam. The change in temperature may cause damage. Never pour water into the cooking compartment
when it is still hot. Never place cookware containing water on the
cooking compartment floor.

6

The prolonged presence of moisture in the cooking compartment leads to corrosion. Allow the cooking compartment to dry after use. Do not keep moist food in the cooking compartment
for a long time with the door closed. Do not store food in the cooking compartment. Leaving the appliance to cool down with the door open will damage the front of neighbouring kitchen units over time. Always allow the cooking compartment to cool
down with the door closed after cooking at high temperatures. Take care not to trap anything in the appliance door. Only leave the cooking compartment to dry with the door open if a lot of moisture was produced during operation. Fruit juice dripping from the baking tray leaves stains that cannot be removed. When baking very juicy fruit flans, do not pack too much on the baking tray. If possible, use the deeper universal pan. Using oven cleaner in a hot cooking compartment damages the enamel. Never use oven cleaner in the cooking compartment when it is still warm. Remove all food remnants from the cooking compartment and the appliance door before you next heat up the appliance. If the seal is very dirty, the appliance door will no longer close properly during operation. This may damage the front of adjacent kitchen units. Keep the seal clean at all times. Never operate the appliance if the seal is damaged or missing. Sitting or placing objects on the appliance door may damage it. Do not place or hang objects on the appliance door. Do not place cookware or accessories on the appliance door. With certain models, accessories may scratch the door pane when closing the appliance door. Always push accessories fully into the cooking compartment. If you carry or move the appliance by the handle on the cover or move, the handle may break off and cause damage to the hinges. The handle of the cover is not designed for the weight of the appliance. Do not carry or move the appliance by the handle on the cover. When grilling, due to high temperatures, the baking tray or universal pan may become deformed and damage the enamel coating when they are removed. When grilling, do not insert the baking tray or universal pan higher than level 3. Above shelf position 3, only grill directly on the wire insert.
2.2Hob with gas
Follow the corresponding instructions when using the appliance.

Preventing material damageen ATTENTION! A build-up of heat may damage the appliance. Never cover the stainless steel hob, for example
with aluminium foil or oven protectors. Only use the accessories specified. Heat can cause damage to adjacent appliances or kitchen units. If the appliance is in operation for an extended period, heat and moisture will be generated. Open a window or switch on an extractor hood lead-
ing to the outside. A build-up of heat may damage the appliance. Do not heat roasters, frying pans or grill stones us-
ing more than one burner at a time. If a control knob is in the wrong position, this could lead to malfunctions. Always turn the control knob to the “Off” position
when the appliance is not being used. Aluminium foil and plastic containers will melt and adhere to hot cooking zone. Observe the manufacturer’s instructions for special
containers. No not use oven liners. The burner may not ignite or the burner flame is not even. Ensure that the hotplate burners are clean and dry. The burner cup and burner cover must be in exactly
the right position. Food may spill. Remove spills immediately. Use deep pots for dishes with a lot of liquid. This prevents overflowing. Penetrating liquid may cause damage to the appliance. The area around the appliance must be clean and
dry. Always keep the appliance and the area around it
clean and dry after cleaning. Ensure that there are no cleaning materials, clean-
ing products or water marks on any of the appliance’s surfaces. The glass lid may crack. Ensure that the upper cover is not closed, e.g. by playing children, while you are using the hotplate. The handles or grips on pots or pans may be damaged. Place the pot or pan precisely in the centre of the steel grid of the burner. This will optimise transfer of the heat from the burner flame to the pot or ban base. The handle or grip does is not damaged, and greater energy savings are guaranteed. The base of the pot or pan may be damaged. Cookware that is used on the hotplate must be securely in place. Only use pots and pans with an even base. Do not heat up empty pots or pans. Damage may occur if hard or pointed objects fall on the hob. Do not let hard or pointed objects fall onto the hob. Do not hold and move the appliance at the gas pipe (collector). Damage to the gas pipe may lead to gas leak. The gas pipe is not designed for the weight of the appliance. Do not hold and move the appliance at the gas pipe.

7

enEnvironmental protection and saving energy

If you are cleaning food remnants or residue liquids that are penetrating below the hotplates into the the burner seat using lyes or similar chemicals, this may lead to damage to the gas components. If you remove the food remnants or residue liquids
from the burner seat, do not use lye or similar effective chemicals.
2.3Drawer area
Follow the corresponding instructions when using the drawer.

ATTENTION! Do not place hot objects in the plinth drawer. The plinth drawer may be damaged. Do not place hot objects in the plinth drawer. Do not place oven accessories that exceed the height of the drawer into the plinth drawer. Otherwise, this may damage the appliance. Do not place oven accessories that exceed the
height of the drawer into the plinth drawer.

Environmental protection and saving energy

Environmentalprotectionandsavingenergy

3.1Disposing of packaging
The packaging materials are environmentally compatible and can be recycled. Sort the individual components by type and dispose
of them separately.
3.2Saving energy
If you follow these instructions, your appliance will use less energy. Only preheat the appliance if the recipe or the recommended settings tell you to do so. ¡ Not preheating the appliance can reduce the en-
ergy used by up to 20%. Use dark-coloured, black-coated or enamelled baking tins. ¡ These types of baking tin absorb the heat particu-
larly well. Open the appliance door as little as possible during operation. ¡ This maintains the temperature in the cooking com-
partment and eliminates the need for the appliance to reheat. When baking multiple dishes, do so in succession or in parallel. ¡ The cooking compartment is heated after baking the first dish. This reduces the baking time for the subsequent cakes. For longer cooking times, you can switch the appliance off 10 minutes before the cooking time ends. ¡ There is sufficient residual heat to finish cooking the dish. Remove any accessories that are not being used from the cooking compartment. ¡ Accessories that are not being used do not need to be heated.

Allow frozen food to defrost before cooking. ¡ This saves the energy that would otherwise be re-
quired to defrost it. Note: The appliance requires: ¡ Max. 0.5 W when the appliance switched off
Saving energy If you follow these instructions, your appliance will use less energy. Choose a burner roughly the same size as your pan. Centre the cookware on the hob. Tip: Cookware manufacturers often give the upper diameter of the saucepan. It is often larger than the base diameter. ¡ Unsuitable cookware or incompletely covered cook-
ing zones consume a lot of energy. Cover saucepans with suitable lids. ¡ Cooking without a lid consumes considerably more
energy. Lift lids as infrequently as possible. ¡ When you lift the lid, a lot of energy escapes.
Use a glass lid. ¡ You can see into the pan through a glass lid
without having to lift it. Use pots and pans with flat bases. ¡ Uneven bases increase energy consumption.
Use cookware that is suitable for the quantity of food. ¡ Large items of cookware containing little food need
more energy to heat up. Cook with only a little water. ¡ The more water that is contained in the cookware,
the more energy is required to heat it up. Turn down to a lower power level early on. ¡ If you use an ongoing power level that is too high,
you will waste energy.

Installation and connection

Installationandconnection
You can find out where and how best to install your appliance here. You will also learn how to connect your appliance to the power supply.

8

4.1Gas connection
Only an authorised expert or a licensed customer service technician may install the appliance in accordance with the instructions specified under “Gas connection and conversion to a different gas type”. ¡ The settings for configuring your appliance can be
found on the rating plate on the rear of the appliance. The gas type set at the factory is marked with an asterisk (*). ¡ Find out about the local supply conditions regarding the gas type and gas pressure before installing the appliance, and ensure that the gas setting for the appliance complies with this information. ¡ Connect and install this appliance in accordance with the applicable to the installation instructions. ¡ Do not connect this appliance to a waste gas main on the combustion products. Do not connect this appliance to an exhaust gas outlet. Comply with all ventilation regulations. ¡ Establish the gas supply using a permanent, nonelastic connection, such as a gas pipe or a flexible safety gas hose. ¡ If a flexible safety gas hose is used, ensure that the hose is not jammed or squeezed. Keep the hose away from hot surfaces. ¡ On some appliances, you can connect the gas pipe to the gas pipe or flexible safety gas hose on the right-hand or the left-hand side of the appliance. If necessary, you can change the connection side. The connection must have a free-standing and easily accessible locking device. Target appliance operating pressure ¡ You can find the target operating pressure for your appliance on the rating plate on the rear of the appliance. ¡ All the data on your appliance’s rating plate relates to these pressure values. ¡ The manufacturer is not responsible for results, performance or any risk caused by operating the appliance at different values.
WARNING Risk of explosion! Escaping gas may cause an explosion. If the gas pressure in your distributing pipes is more than 20% higher than the values specified on the appliance’s rating plate, a gas leak can occur. For your own safety, it is imperative that you operate
the appliance with a suitable gas governor. If you do not know what the gas pressure in your
gas distributing pipes is, please ask your local gas company. Connection, maintenance and setting of the gas governor must be carried out by an authorised installation specialist. A gas leak could occur. If you move the appliance after the gas supply has been established, a gas leak could occur. Do not move the appliance once the gas supply is connected. If you move the appliance, check that the connections are not leaking.

Installation and connectionen
4.2Electrical connection
The appliance must be connected by an authorised specialist. You must comply with the requirements of your electricity supplier. ¡ Your appliance is designed to operate at 220­
240 V. A 16 A fuse is required for connection. ¡ If the electricity supply drops below 180 V, the elec-
trical ignition system does not work. ¡ If the power cable of this appliance is damaged, this
must be replaced by the manufacturer, the manufacturer’s customer service or a similarly qualified person in order to prevent any risk. ¡ Any damage arising from the appliance being connected incorrectly will invalidate the warranty. Information on electrical connection by our customer service: ¡ Connect the appliance in accordance with the specifications on the rating plate. ¡ The appliance must only be connected to an electrical connection that corresponds to the applicable regulations. The socket must be easily accessible so that you can disconnect the appliance from the electricity supply if necessary. ¡ Ensure that a multi-pin disconnecting system is available. ¡ For safety reasons, this appliance must only be connected to an earthed connection. If the safety earth terminal does not comply with regulations, protection against electrical risks is not guaranteed. ¡ To connect the appliance, use H 05 VV-F cables or other equivalent cables. Information on the electrical connection by the installer: ¡ If the plug is not accessible following installation, an all-pole isolating unit with a contact clearance of at least 3 mm must be available on the installation side. This is not necessary if the appliance is connected via a plug that is accessible to the user. ¡ Electrical safety: The cooker corresponds to safety class I and may only be used in conjunction with a safety earth terminal. ¡ To connect the appliance, use H 05 VV-F cables or other equivalent cables. Important information about the electrical connection Note the following information and ensure that:
WARNING Risk of electric shock! There is a risk of electric shock if you touch live components. Hold the mains plug with dry hands only. Never pull out the mains plug from the socket while
the appliance is in operation. Pull out the power cable directly at the plug and
never by pulling the power cable as this may become damaged. ¡ Fit the mains plug and socket together. ¡ The mains plug can be accessed at all times. ¡ The cross section of the cable is sufficient. ¡ The mains cable is not kinked, crushed, modified or severed. ¡ If required, the mains cable must only be replaced by a qualified electrician. A replacement mains cable is available from the after-sales service.
9

enInstallation and connection
¡ Do not use any multiple plugs or multi-connectors and extension cords.
¡ The earthing system is correctly installed. ¡ If using a residual current device, only use one that
bears the mark . The presence of this mark is the only way to be sure that it fulfils all the applicable regulations. ¡ The mains cable does not come into contact with heat sources.
4.3Setting up the appliance
Place the appliance on a smooth surface. Never set up the appliance behind a decorative door or the door of a kitchen unit. There is a risk of overheating.

1. Pull out the plinth drawer and lift it up and out. There are adjustable feet at the front and rear on the inside of the plinth.
2. Use an Allen key to raise or lower the adjustable feet until the cooker is level.

3. Push in the plinth drawer.

Max
¡ Install the appliance in accordance with the specified dimensions.
¡ The distance between the top edge of the cooker and the bottom edge of the extractor hood must meet the requirements of the extractor hood manufacturer.
¡ Ensure that the appliance is not moved again after it is set up.
¡ In particular, the distance from the high-output burner or wok burner to the fronts of adjacent units or from the wall must be at least 50 mm.
Setting the base height of the appliance Set the base height in accordance with the functions of your appliance.
Adjusting the height of the appliance with fixed drawers If your appliance has fixed drawers, set the base height of your appliance as follows. Note: The appliance has height-adjustable feet. This allows the appliance to be raised approx. 15 mm from the ground. ¡ The feet are located at the front and rear on the un-
derside of the appliance. ¡ Raise or lower the feet by turning the feet with an Al-
len key until the appliance is in a horizontal position.
Setting the base height of the appliance with a removable drawer If your appliance does not have height-adjustable feet and the drawer is removable, set the base height of your appliance as follows.

Adjacent units Any adjacent units must not be made of flammable materials. The fronts of any adjacent units must be heatresistant up to at least 90 °C.
Wall fixing To prevent the appliance from tipping over, you must fix it to the wall using the enclosed brackets. To secure the appliance to the wall, follow the installation instructions.

10

Familiarising yourself with your appliance

5 Familiarising yourself with your appliance Familiarisingyourselfwithyourappliance

5.1Your appliance
You can find an overview of the parts of your appliance here. Note: On certain models, specific details such as colour and shape may differ from those pictured.

Note: On certain models, specific details such as colour and shape may differ from those pictured.
1 2

1
2 3 4 5
6
7
Explanation
1 Top cover1 2 Steam outlet1 3 Hob 4 Control panels 5 Cooling fan1 6 Appliance door 7 Plinth drawer1
1 Depending on the appliance specifications
5.2Hob
You can view an overview of the hob here.

4

3

Power kW
1
2 1,7 kW 3 1 kW 4 3 kW

Burner/hotplate
Steam outlet Note: When the oven is operating, hot steam escapes here. Standard-output burner Economy burner High-output burner

5.3Control panels
You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.
Controls You can use the controls to configure all functions of your appliance and to obtain information about the operating status.

Control Timer Function selector
Hotplate control

Explanation You can use the timer to set a cooking time. “Timer”, Page 12 Use the function selector to set the type of heating. “Function selector”, Page 12 You can use the four hotplate switches to control the output provided by each individual hotplate. The symbol above each of the switches shows you which hotplate is set using that switch. “Gas hob selector”, Page 12

11

enFamiliarising yourself with your appliance

Control Ignition button

Explanation To switch on the electronic ignition system. “Ignition button”, Page 12

Position 170­270

Power kW 3 kW 2.1 kW

Function Zero setting Temperature setting range
Grill position

Control Lamp button

Explanation Press the button to switch on the oven light. “Lamp key”, Page 12

Function selector Turn the function selector for the oven temperature anticlockwise or clockwise for the grill function.

Explanation The oven is switched off.
Heat generated by the lower oven gas burner in ºC for preparing cakes in tins, pizza on a baking tray, baked goods, etc. Position of the grill burner for grilling food at max. temperature

Timer You can use the timer to set the cooking time up to 60 minutes.

Note: The timer has no effect on how the oven works. It can only be used as a kitchen timer.

Position – 60

Function Zero setting
End of the programmed cooking time Time period

Explanation Off A signal sounds at the end of the set cooking time.
Time scale in minutes

Gas hob selector The gas hotplate selector is used to set the heat setting for the hotplates.

Position

Function Zero setting
Settings range

Explanation The hotplate is switched off.
Large flame = highest setting Small flame = lowest setting

There is a limit stop at the end of the settings range. Do not turn the gas hotplate selector beyond the end stop.

Lamp button

Use Switch on the oven light.

Lamp key To illuminate the cooking compartment, press the lamp button.
Activating and deactivating Press the button to switch on. Press the button to switch the machine off.

Ignition button Button for switching on the electronic ignition system

Ignition knob

Use Ignite the hotplate burners. Ignite the gas grill. Ignite the lower oven gas burner.

Explanation If you press the button, all igniters create sparks at the same time.

5.4Cooking compartment
The functions in the cooking compartment make your appliance easier to use.
Rails The rails in the cooking compartment enable you to place accessories at different heights.

The cooking compartment has five shelf positions. The shelf positions are numbered from bottom to top.

12

You can remove the rails, e.g. for cleaning. “Rails”, Page 20
Lighting The oven light lights up the cooking compartment.

Accessories

Accessories
Use original accessories. These have been made especially for your appliance. Note: Heat may deform the accessory. This deformation has no effect on the function. When the accessory cools down, it will regain its original shape. Accessories Wire rack
Baking tray

Accessoriesen
To illuminate the cooking compartment, press the lamp button. Steam outlet The hot air from the cooking compartment escapes at the rear of the hob. ATTENTION! Covering the ventilation slots will cause the appliance to overheat. Do not cover the ventilation slots. Appliance door If you open the appliance door during operation, the operation continues. Condensation Condensation can occur in the cooking compartment and on the appliance door when cooking. Condensation is normal and does not adversely affect appliance operation. Wipe away the condensation after cooking.
The accessories supplied may differ depending on the appliance model.
Use ¡ Baking tins ¡ Ovenproof dishes ¡ Cookware ¡ Meat, e.g. roasting joints or steak ¡ Frozen meals ¡ Tray bakes ¡ Sponge cake, simple

Protecting plate

6.1Using the accessory
Always slide the accessory into the cooking compartment correctly. This is the only way that you can remove the accessory halfway without it tipping. 1. Insert the accessory between the two guide rods for
a shelf position.

Wire rack Tray E.g. universal pan or baking tray

Insert the wire rack with the open side facing the appliance door and the curved lip facing downwards. Slide the tray in with the sloping edge facing the appliance cover.

¡ When grilling ¡ Protects the control panel and control
knobs against high temperatures when grilling

13

enBefore using for the first time

2. Protecting plate

The protecting plate is kept in the bottom drawer or on the rear of the appliance. Insert the protecting plate with the symbol facing upwards in such a way that the lugs lie completely in the notches.

Note: There are three notches below the control panel. Insert the three lugs on the protecting plate into the three notches.

3. Slide the accessory all the way in, making sure that the accessory does not touch the appliance door.
Note: Take any accessories that you will not be using out of the cooking compartment while the appliance is in operation.
6.2Other accessories
You can purchase other accessories from our aftersales service, specialist retailers or online. You will find a comprehensive range of products for your appliance in our brochures and online: www.bosch-home.com Accessories vary from one appliance to another. When purchasing accessories, always quote the exact product number (E no.) of your appliance. You can find out which accessories are available for your appliance in our online shop or from our aftersales service.

Before using for the first time

Beforeusingforthefirsttime

Configure the settings for initial start-up. Clean the appliance and accessories.
7.1Cleaning the appliance before using it for the first time
Clean the cooking compartment and accessories before using the appliance to prepare food for the first time. 1. Remove the accessory and the leftover packaging,
such as polystyrene pellets, from the cooking compartment. 2. Before heating, wipe the smooth surfaces in the cooking compartment with a soft, damp cloth. 3. Ventilate the room while the appliance is heating.

4. Set the type of heating and the temperature. “Basic operation”, Page 16
Type of heat- Lower oven gas burner/gas grill ing Temperature Maximum Cooking time 30 minutes 5. Switch off the appliance after the specified cooking time. 6. Wait until the cooking compartment has cooled down. 7. Clean the smooth surfaces with soapy water and a dish cloth. 8. Clean the accessory with soapy water and a dish cloth or a soft brush.

Cookware

This information has been provided to help you save energy and avoid damaging your cookware.
8.1Using cookware
The selection and positioning of the cookware affects the safety and energy efficiency of your appliance. “Saving energy”, Page 8
WARNING Risk of fire! Flammable objects may ignite. Maintain a distance of at least 50 mm between the
cookware and flammable objects.

Note: When using some items of cookware, a temporary, slight deformation of the stainless steel cooking surface may occur. This is normal and does not affect the functionality of the appliance.

Do not use deformed

Deformed cookware is

cookware. Only use cook- not stable on the hob and

ware with a thick, flat

may tip over.

base.

Place the cookware right in the centre of the burner.

The cookware may tip over if it is not placed in the centre of the burner.

Place the cookware correctly on the pan supports.

The cookware may tip over if you place it directly on the burner.

14

8.2Suitable cookware
1. Only use cookware with a suitable diameter. “Suitable cookware”, Page 15
2. Ensure that the cookware does not protrude over the edge of the hob.
Suitable cookware Only use cookware with a suitable diameter. The cookware must not protrude over the edge of the hob.

Operating the hotplateen

Burner/hotplate
High output burner Standard output burner Economy burner

Maximum diameter of the base of the cookware 280 mm 240 mm

Minimum diameter of the base of the cookware 240 mm 180 mm

180 mm

120 mm

Operating the hotplate

Operatingthehotplate
You can find out everything you need to know about operating your hotplate here.
9.1Fitting burner parts
You can find out how to correctly position the burner parts here. Requirement: Ensure that the burner parts are clean and dry. 1. Ensure that the individual parts of the burners are fit-
ted in their exact position and are straight; otherwise, this may result in ignition problems or problems during operation. 2. Position the burner lid precisely on the burner head.
9.2Important information about the gas hob
Follow these instructions when using your gas hob. ¡ A slight whistling when operating the burner is nor-
mal. ¡ Odour formation during the first uses is normal. This
does not indicate a risk or malfunction. It will stop after a while. ¡ An orange flame is normal. This is caused by dust in the air, overflowing liquids, etc. ¡ If the burner’s flame accidentally goes out, switch off the burner’s selector and wait at least 1 minute before igniting the burner again. ¡ A few seconds after switching off the hob, you may hear noises, such as a slight clicking, from the burner. This is not unusual, but shows that the pilot is deactivated. ¡ Keep the ignition plugs clean. If the ignition plugs are dirty, the igniter is damaged. Clean the ignition plugs regularly with a small, metal-free brush. Ensure that the ignition plugs are not exposed to any heavy knocks.

9.3Operating the hotplate
You can ignite the gas burner as follows. WARNING Risk of fire!
Escaping gas may ignite. If the burner does not ignite after 15 seconds, turn
the control knob to the “Off” position and open the door or window in the room. Do not attempt to re-ignite the burner for at least one minute. In the event of the burner flames being accidentally extinguished, turn off the burner control. Do not attempt to re-ignite the burner for at least one minute. ATTENTION! The burner may not ignite or the burner flame is not even. Ensure that the hotplate burners are clean and dry. The burner cup and burner cover must be in exactly the right position. The burner may go out accidentally. If the burner’s flame accidentally goes out, switch off the burner’s selector and wait at least one minute before igniting the burner again. 1. Open the top cooker cover. The top cover must remain open for as long as the hotplate is in operation. 2. Place suitable cookware on the pan support. “Suitable cookware”, Page 15 3. Press and hold the selector for the required burner and turn it to . 4. With the hotplate selector pushed in, press . a The gas begins to flow out and the gas burner ignites. 5. Press and hold the hotplate selector for approx. 1­3 seconds. a The safety pilot is therefore activated. If the gas flame goes out, the gas supply is automatically shut off by the safety pilot. 6. Set the desired flame size. The flame is not stable between settings Off and . You must therefore always choose a position between the large flame and small flame. 7. Check whether the flame is burning. If the flame is not burning, repeat the steps. 8. To end the cooking process: Turn the hotplate selector clockwise to .
9.4Manually igniting the appliance
Note: In the event of a power cut, you can light the burners manually.
15

enBasic operation 1. Place suitable cookware on the pan support. 2. Push in the selector for your chosen burner and turn
it anti-clockwise to the power level you require. Press and hold the selector.

3. Light the burner with a gas lighter or a match. Keep the selector pressed in for a few seconds after ignition.

9.5Recommended cooking settings
You can find an overview of different foods with appropriate heat settings here. Notes ¡ The cooking time will vary depending on the type, weight, thickness and quality of the food. ¡ Select the right cookware size for each hotplate. The diameter of the cookware base should be the same size as
the hotplate. ¡ Use as little water as possible when cooking, so that the food retains its vitamins and minerals.
­ Use as little water as possible when cooking, so that the food retains its vitamins and minerals. ­ Select short cooking times so that the vegetables remain firm and full of nutrients.

Example Melting Warming

Food Chocolate, butter, margarine Stock, tinned vegetables

Heating and keeping warm Steaming*

Soups Fish

Braising* Boiling* Frying

Potatoes and miscellaneous vegetables, meat Rice, vegetables, meat dishes (with sauces) Pancakes, potatoes, schnitzel, fish fingers

Hotplate Economy burner Standard output burner Economy burner
Standard output burner Standard output burner Standard output burner Large burner** Wok burner**

Power level Small flame Small flame
Small flame
Between large and small flame
Between large and small flame
Large flame
Between large and small flame Between large and small flame

Note: Information ¡ * If you are using a pan with a lid, turn the flame
down as soon as the food starts to boil.

¡ ** Optional. Available for some appliances. Depending on the appliance type. (For frying on the wok burner, we recommend that you use a wok.)

Basic operation

10.1Setting the lower oven gas burner
When the lower gas burner is lit, you can start to bake on a baking tray with the oven door closed.
WARNING Risk of fire! Escaping gas may ignite. If the burner does not ignite after 15 seconds, turn
the control knob to the “Off” position and open the door or window in the room. Do not attempt to re-ignite the burner for at least one minute. In the event of the burner flames being accidentally extinguished, turn off the burner control. Do not attempt to re-ignite the burner for at least one minute. ATTENTION! The burner may go out accidentally. If the burner’s flame accidentally goes out, switch off the burner’s selector and wait at least one minute before igniting the burner again. 1. Open the top cover, if available. The top cover must remain open while the appliance is running.

2. Turn on the main gas supply to the appliance. Insert the plug in the socket. Open the oven door.
3. Push in the function selector and turn it anti-clockwise to set the desired temperature. Keep the function selector pressed in and press at the same time.
a Use the igniter to ignite the gas that escapes from the lower gas burner.
4. To activate the safety pilot, press and hold the function selector for 10 seconds.
a The safety pilot is therefore activated. If the gas flame goes out, the gas supply is automatically shut off by the safety pilot.
5. Check through the opening in the oven’s bottom panel that the flame is burning. If the flame is not burning, repeat the steps.
6. Close the oven door carefully. 7. Note: Preheat the empty oven for 15 minutes and
then start the preparation. You can change the temperature at any time. Once the food is cooked, switch off the function selector.

16

10.2Setting the oven gas grill
If the gas burner for the gas grill is lit, you can grill in the oven.
WARNING Risk of fire! Escaping gas may ignite. If the burner does not ignite after 15 seconds, turn
the control knob to the “Off” position and open the door or window in the room. Do not attempt to re-ignite the burner for at least one minute. In the event of the burner flames being accidentally extinguished, turn off the burner control. Do not attempt to re-ignite the burner for at least one minute. ATTENTION! The burner may go out accidentally. If the burner’s flame accidentally goes out, switch off the burner’s selector and wait at least one minute before igniting the burner again. The gas grill only works when the protective plate is inserted. Ensure that the protective plate has been inserted correctly. 1. Open the top cover, if available. The top cover must remain open while the appliance is running.
11 Time-setting options Time-settingoptions
Your appliance is equipped with a time-setting option that can be used to set the timer.
11.1Timer
The timer can be used as a kitchen timer. The timer runs alongside other settings. The timer can be set at any time, even if the appliance is switched off. Note: The timer has no effect on how the oven works. It can only be used as a kitchen timer.

Cleaning and servicing

Cleaningandservicing
To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully.
12.1Cleaning agent
To avoid damaging the different surfaces of the appliance, do not use unsuitable cleaning agents.
WARNING Risk of electric shock! An ingress of moisture can cause an electric shock. Do not use steam- or high-pressure cleaners to
clean the appliance. ATTENTION! Unsuitable cleaning agents damage the surfaces of the appliance. Do not use aggressive or abrasive cleaning agents.
Suitable cleaning agents Only use cleaning agents that are suitable for the different surfaces on your appliance.

Time-setting optionsen 2. Turn on the main gas supply to the appliance. Insert
the plug in the socket. Open the oven door. 3. Insert the protective plate with the symbol facing up-
wards in such a way that the lugs lie completely in the notches. There are three notches below the control panel. Insert the three lugs on the protective plate into the three notches. 4. Close the oven door so that it is as close as possible to the protective place. 5. Push in the function selector and turn it clockwise to the grill setting . 6. Keep the function selector pressed in and press the ignition button at the same time. Keep the function selector pushed in for 10 seconds so that the safety pilot starts up. a The safety pilot is activated. If the gas flame goes out, the gas supply is automatically shut off by the safety pilot. 7. Check whether the flame is burning. If the flame is not burning, repeat the steps. 8. Once the food is cooked, switch off the function selector. Once the oven has cooled down, remove the protective plate.
Setting the timer The timer can be set up to 60 minutes regardless of whether the appliance is on or off. 1. Set the timer to the required cooking time. 2. Once the timer duration has elapsed
An audible signal sounds. The timer automatically switches to the Off position.
Do not use cleaning products with a high alcohol content.
Do not use hard scouring pads or cleaning sponges.
Do not use any special cleaners if the appliance is still warm.
Using oven cleaner in a hot cooking compartment damages the enamel. Do not use oven cleaner in the cooking compart-
ment when it is still warm. Remove all food remnants from the cooking com-
partment and the appliance door before you next heat up the appliance. New sponge cloths contain residues from production. Wash new sponge cloths thoroughly before use.
Follow the instructions on cleaning the appliance. “Cleaning the appliance”, Page 19
17

enCleaning and servicing

Appliance

Surface Stainless steel
Enamel, plastic, painted, and screen-printed surfaces E.g. control panel Knobs Gas hotplate burners and pan supports Plinth drawer

Suitable cleaning agents Information

¡ Hot soapy water

To prevent corrosion, remove any limescale, grease, starch or albu-

¡ Special stainless steel min (e.g. egg white) stains on stainless steel surfaces immediately.

cleaning products

Apply a thin layer of the stainless steel cleaning product.

suitable for hot sur-

faces

¡ Hot soapy water

Do not use a glass cleaning product or a glass scraper.

¡ Hot soapy water ¡ Hot soapy water
¡ Hot soapy water

Clean with a dish cloth and dry with a soft cloth. Do not remove or scrub. Clean the burner parts and pan support with a dish cloth. Only use a little water. Water must not be allowed to enter the inside of the appliance through the burner compartments. Do not clean in the dishwasher. Clean with a dishcloth.

Appliance cover

Area

Suitable cleaning agents Information

Door panels

¡ Hot soapy water

Do not use a glass scraper or steel wool.

Door cover

¡ Made of stainless steel: Stainless steel cleaner:
¡ Made of plastic: Hot soapy water

Do not use a glass cleaning product or a glass scraper. Tip: To thoroughly clean the cover plate, remove the cover. “Appliance door”, Page 21

Door handle

¡ Hot soapy water

In order to avoid stubborn dirt, remove descaling agents from the door handle immediately.

Door seal

¡ Hot soapy water

Do not remove or scrub.

Upper glass cover ¡ Glass cleaner

Clean with a soft cloth. Tip: Remove the upper glass cover for thorough cleaning. “Top cover”, Page 22

Hob Area Enamelled surfaces
Glass cover on the oven light Rails Accessories

Suitable cleaning agents Information

¡ Hot soapy water ¡ Vinegar solution ¡ Oven cleaner

Soak any heavily soiled areas and use a brush or steel wool. Leave the appliance cover open so that the hob can dry after it has been cleaned. Notes ¡ Enamel burns at very high temperatures, causing minor discol-
ouration. The functionality of the appliance is not affected by this. ¡ The edges of thin baking trays cannot be completely enamelled
and may be rough. This does not impair the corrosion protection. ¡ Food residues leave a white coating on the enamelled surfaces.
The coating does not pose a health risk. The functionality of the appliance is not affected by this. You can remove these residues with lemon juice.

¡ Hot soapy water

Use oven cleaner to remove very heavy soiling.

¡ Hot soapy water ¡ Hot soapy water ¡ Oven cleaner

Soak any heavily soiled areas and use a brush or steel wool. Tip: Remove the shelf supports for cleaning. “Rails”, Page 20
Soak any heavily soiled areas and use a brush or steel wool. Enamelled accessories are dishwasher-safe.

18

12.2Cleaning the appliance
In order to avoid damaging the appliance, clean your appliance only as specified, and using suitable cleaning products.
WARNING Risk of burns! The appliance and its parts that can be touched become hot during use. Caution should be exercised here in order to avoid
touching heating elements. Young children under 8 years of age must be kept
away from the appliance. WARNING Risk of fire!
Loose food remnants, fat and meat juices may catch fire. Before using the appliance, remove the worst of the
food residues and remnants from the cooking compartment, heating elements and accessories. Requirement: Read the information on cleaning agents. “Cleaning agent”, Page 17 1. Clean the appliance using hot soapy water and a dish cloth. For some surfaces, you can use alternative
cleaning agents. “Suitable cleaning agents”, Page 17 2. Dry with a soft cloth.
12.3Cleaning controls
WARNING Risk of electric shock! An ingress of moisture can cause an electric shock. Do not detach the control knobs to clean them. Do not use wet sponge cloths. 1. Observe the information regarding the cleaning
agents. 2. Clean using a damp sponge cloth and hot soapy
water. 3. Dry with a soft cloth.
12.4Discoloration of the burners
After long use, the brass burner parts become darker due to natural oxidation. This discolouration does not affect their usability.
12.5Cleaning the pan support manually
WARNING Risk of burns! The appliance becomes hot during operation. Allow the appliance to cool down before cleaning. 1. Carefully remove the pan support. 2. Soak the pan support in the sink. 3. Clean the pan support using a scrubbing brush and
washing-up liquid. 4. Rinse the pan support rinse with clean water. 5. Dry the pan support with a kitchen towel.

Cleaning and servicingen
12.6Using cleaning gel for burnt-on dirt
For hard-to-remove, burnt-on dirt, you can order a cleaning gel from our online shop, from your specialist retailer or via our after-sales service. 1. Follow the instructions on the cleaning product. 2. Remove the pan supports and the burner parts. 3. ATTENTION!
On the burner parts, the controls and the aluminium surfaces, the cleaning gel leads to damage. Only use the cleaning gel on the pan supports
and stainless steel surfaces. Apply the cleaning gel to the burnt-on dirt. 4. If necessary, let the dirt soak overnight.
12.7Cleaning the stainless steel surfaces
1. Observe the information regarding the cleaning agents.
2. Clean using a sponge cloth and hot soapy water in the direction of the finish.
3. Dry with a soft cloth. 4. Apply a thin layer of the stainless steel cleaning
product with a soft cloth. Tip: You can obtain stainless steel cleaning products from after-sales service or the online shop.
12.8Cleaning the burners
After a long period of use, the brass burner parts become darker due to natural oxidation. This discolouration does not affect their usability.
WARNING Risk of burns! The appliance becomes hot during operation. Allow the appliance to cool down before cleaning. 1. Carefully remove the pan support. 2. Carefully remove the burner parts. 3. Clean the burner parts using a scrubbing brush and
washing-up liquid. 4. Rinse the burner parts with clean water. 5. Ensure that the burner parts are completely dry be-
fore fitting them; otherwise, there may be ignition problems or problems during operation.
12.9Cleaning the cooking zone switch
Clean the cooking zone switch after use if it is dirty or stained. Note: ¡ Read the information on unsuitable cleaning agents. ¡ Do not use a glass scraper. ¡ Do not use a glass ceramic cleaner. ¡ Do not remove the cooking zone switch. 1. Clean the cooking zone switch using hot soapy wa-
ter and a soft cloth. ­ Wring out the cloth well. The cloth must not be
too wet. ­ Wash new sponge cloths thoroughly before use. 2. Dry with a soft cloth.

19

enRails
13 Rails Rails
To clean the rails and cooking compartment thoroughly, you can remove the shelf supports.
13.1Unhooking the rails
WARNING Risk of burns! The rails can be very hot. Never touch the rails when they are hot. Allow the appliance to cool down. Keep children at a safe distance. 1. Hold the bottom of the shelf support and pull it
slightly towards the front. Pull the extension pins in the lower section of the rails out of the mounting openings.

2. ATTENTION! Incorrect assembly Never move the rail before the two hooks are secured fully in the upper holes. Otherwise the enamelled coating may be damaged and break.

3. Both hooks must be inserted fully into the upper holes. Move the rail down slowly and carefully, and hook it into the lower holes.

2. Pull the entire shelf support downwards first and then pull it forwards and remove it. 4. Hook both rails into the side walls of the oven.

13.2Attaching the rails
1. Place the two hooks at the top of the rail into the upper holes.

If the rails are fitted correctly, the distance between the two upper shelf positions is greater.

20

Appliance door

14 Appliance door Appliancedoor
It is normally sufficient if you clean the outside of the appliance door. If the appliance door is very dirty on the inside and outside, you can remove the appliance door and clean it.
14.1Door hinges
WARNING Risk of injury! When the hinges are not secured, they can snap shut with great force. If you open the appliance door, ensure that the lock-
ing levers are fully open or fully closed. 1. The oven door hinges each have a locking lever.
When the locking levers are closed, the oven door is secured in place.

2. Open the locking levers on the left- and right-hand hinges.
3. Close the oven door as far as the limit stop. Grip the left and right hand sides of the door with both hands. Close the door slightly more and remove it.

It cannot be detached. 2. When the locking levers are open in order to detach
the oven door, the hinges are secured.
The hinges cannot snap shut.
14.2Removing the appliance door
1. Open the oven door fully.

14.3Attaching the appliance door
Reattach the oven door in the reverse sequence to removal.
WARNING Risk of injury! The oven door might accidentally fall or a hinge may suddenly snap shut. In this case, do not hold onto the hinge. Call cus-
tomer service. 1. When attaching the oven door, ensure that both
hinges are inserted in the opening direction.

21

enTop cover 2. The notch on the hinge must engage on both sides.
3. Close both locking levers again.

4. Close the appliance door.
14.4Additional door safety
Additional safety devices have been fitted to prevent contact with the oven doors. Always attach these safety devices when children could come near the oven. You can purchase this special accessory from after-sales service. 11023590
WARNING Risk of burns! During long cooking times, the oven door may become very hot. Supervise small children when the oven is in opera-
tion.

15 Top cover Topcover
For cleaning, remove the top cover.
15.1Removing the upper cover
WARNING Risk of injury! A scratched upper glass cover may break and fragment. Do not use a glass scraper or any harsh or abrasive
cleaning products. Requirement: Before opening the top cover, remove any spills with a cloth. 1. Take hold of the sides of the cover with both hands
and pull the cover upwards.

2. Use a glass cleaner for cleaning. Note: If the cover hinges become loose, note the letters marked on them. The hinge with the letter R must be fitted on the right, and the hinge with the letter L must be fitted on the left.
15.2Installing the top cover
After cleaning, install the top cover following the same procedure in reverse order.
Note: Only close the top cover once the hotplates have cooled down.

22

Troubleshooting

16 Troubleshooting Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs.
WARNING Risk of injury! Improper repairs are dangerous. Repairs to the appliance should only be carried out
by trained specialist staff. If the appliance is defective, call Customer Service.
“Customer Service”, Page 25

WARNING Risk of electric shock! Improper repairs are dangerous. Repairs to the appliance should only be carried out
by trained specialist staff. Only use genuine spare parts when repairing the
appliance. If the power cord of this appliance is damaged, it
must be replaced by the manufacturer, the manufacturer’s Customer Service or a similarly qualified person in order to prevent any risk.

16.1Malfunctions

Fault

Cause and troubleshooting

The appliance is not The mains plug of the power cord is not plugged in.

working.

Connect the appliance to the power supply.

The circuit breaker in the fuse box has tripped.

Check the circuit breaker in the fuse box.

There has been a power cut.

Check whether the lighting in your room or other appliances are working.

There is a smell of gas in the kitchen.

The gas cylinder connection is leaking. 1. Ventilate the room. 2. Check the gas cylinder connection.

The gas pipe to the appliance is leaking. 1. Ventilate the room. 2. Call the gas supplier.

Burner does not ignite.

There has been a power cut. Light the burner with a gas lighter or a match.

The burner parts are positioned incorrectly. 1. Position the burner parts precisely and evenly. 2. Ensure that the locking catches click into place in the recesses.

Burner parts are wet.

Carefully dry the burner parts.

Food remnants or dirt are located between the ignition plug and the burner.

Clean the space between the ignition plugs and burners.

The safety valve for the gas line is closed.

Open the safety valve for the gas line.

Gas cylinder is empty.

Replace the gas cylinder.

There is air in the gas line following initial connection or a cylinder change. 1. Turn the control knob to 0. 2. Ignite the burner again. 3. If necessary, repeat the ignition several times.

Burner goes out

The control knob was not held down for long enough.

straight after being ig- 1. Keep the control knob pressed in for a few seconds after ignition.

nited.

2. Push the control knob in firmly.

Openings on the burner are soiled.

Clean and dry the openings on the burner.

The burner flame is not uniform.

The burner parts are positioned incorrectly. 1. Position the burner parts precisely and evenly. 2. Ensure that the locking catches click into place in the recesses.

Openings on the burner are soiled.

Clean and dry the openings on the burner.

23

enTransportation and disposal

Fault

Cause and troubleshooting

The burner flame goes out while the appliance is in operation.

Gas cylinder is empty. Replace the gas cylinder.

The gas grill does not The protective plate is incorrectly inserted.

work.

1. Ensure that the protective plate has been inserted correctly.

2. Remove the protective plate and reinsert it.

16.2Replacing the oven light bulb
If the light in the cooking compartment fails, change the oven light bulb. Note: Heat-resistant, 25-watt bulbs are available from the after-sales service or specialist retailers. Only use these bulbs.
WARNING Risk of burns! The appliance and its parts that can be touched become hot during use. Caution should be exercised here in order to avoid
touching heating elements. Young children under 8 years of age must be kept
away from the appliance.
WARNING Risk of electric shock! When changing the bulb, the bulb socket contacts are live. Before replacing the bulb, ensure that the appliance
is switched off in order to prevent a potential electric shock. Also unplug the appliance from the mains or switch off the circuit breaker in the fuse box. Requirements ¡ The appliance is disconnected from the power supply. ¡ The cooking compartment has cooled down. ¡ A new halogen bulb to replace the old one is available.

1. Place a tea towel in the cooking compartment to prevent damage.
2. Turn the glass cover anti-clockwise to remove it. 3. Remove the oven light bulb.
4. Replace the oven light bulb with the same type of bulb.
5. Screw in the glass cover. 6. Remove the tea towel from the cooking compart-
ment. 7. Connect the appliance to the power supply.
16.3Glass cover
If the glass cover is damaged, replace it immediately. Suitable glass covers are available from the after-sales service. Specify the E number and FD number of your appliance.

Transportation and disposal

You can find out here how to prepare your appliance for transportation. You will also find out how to dispose of old appliances.
17.1Disposing of old appliance
Valuable raw materials can be reused by recycling. 1. Unplug the appliance from the mains. 2. Cut through the power cord. 3. Dispose of the appliance in an environmentally
friendly manner. Information about current disposal methods are available from your specialist dealer or local authority.

This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.
17.2Transporting the appliance
Keep the original appliance packaging. Only transport the appliance in the original packaging. Observe the transport arrows on the packaging. 1. Secure all moving parts in and on the appliance us-
ing adhesive tape that can be removed without leaving any traces.

24

2. Slide all accessories, such as baking trays, into the corresponding slots with thin cardboard at the edges, in order to avoid damaging the appliance.
3. Place cardboard or similar between the front and rear side to prevent knocks against the inside of the door glass.
4. Secure the door and, if available, the top cover to the appliance sides using adhesive tape.

Customer Service

Detailed information on the warranty period and terms of warranty in your country is available from our aftersales service, your retailer or on our website. If you contact Customer Service, you will require the product number (E-Nr.) and the production number (FD) of your appliance. The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website. This product contains light sources from energy efficiency class G.

19 How it works Howitworks
Here, you can find the ideal settings for various types of food as well as the best accessories and cookware. These recommendations are perfectly tailored to your appliance.

19.1Proceed as follows:

Note: If you are using the appliance for the first time, follow this important information: ¡ “Safety”, Page 2 ¡ “Saving energy”, Page 8 ¡ “Preventing material damage”, Page 6

1. Select a suitable type of food from the overview of food.

Note: If you do not find the exact food or application that you want to prepare or implement, look for a

similar dish and take the general information into consideration. 2. Remove any accessories from the cooking compart-

ment. 3. Select suitable cookware and accessories.

Use the cookware and the accessory listed in the

recommended settings. 4. Only preheat the appliance if the recipe or the re-
commended settings tell you to do so. 5. Use the recommended settings when configuring

the appliance settings.

6.

WARNING Risk of scalding!

Hot steam may escape when you open the appli-

ance door. Steam may not be visible, depending on

the temperature. Open the appliance door carefully. Keep children at a safe distance.

When the dish is ready, switch off the appliance.

Customer Serviceen If the original packaging is no longer available 1. In order to guarantee sufficient protection against
any transport damage, pack the appliance in protective packaging. 2. Always transport the appliance upright. 3. Do not hold the appliance by the door handle or the connections on the rear, as these could be damaged. 4. Do not place any heavy objects on the appliance.
18.1Product number (E-Nr.) and production number (FD)
You can find the product number (E-Nr.) and the production number (FD) on the appliance’s rating plate. You will see the rating plate with these numbers if you open the appliance door. Make a note of your appliance’s details and the Customer Service telephone number to find them again quickly.
19.2Condensation
This section tells you how condensation is formed, how you can prevent damage, and how you can prevent condensation from forming. When you are cooking food in the cooking compartment, a lot of steam may form in the cooking compartment. Since your appliance is extremely energy-efficient, only a small amount of heat escapes during operation. Due to the significant differences in temperature between the appliance interior and the external parts of the appliance, condensation may build up on the appliance door, the control panel or the front panels of adjacent kitchen cabinets. The formation of condensation is a normal physical phenomenon. In order to prevent damage, wipe away the condensation. When you preheat the appliance, you reduce the buildup of condensation.
19.3Cooking tips
Observe this information when preparing food. ¡ The temperature and cooking time depend on the
amount of food and the recipe. Settings ranges are specified for this reason. Select the lower value first. ¡ The setting values apply to food placed in the cooking compartment while the cooking compartment is still cold. Do not place accessories into the cooking compartment until it has finished preheating. ¡ Remove any accessories that are not being used from the cooking compartment. ¡ Ensure that the accessory slides in the right way round.

25

How it works

Reference gases Unsuitable gas mixtures may impair the cooking power level. Note: The appliance was manufactured in accordance with the reference gases specified in the standards. If you use gas that does not correspond to the specified gas mixture and gas pressure, under certain circumstances, the power level and the heat output do not deliver the desired result.

Gas designation G20

Gas mixture in % CH4=100

Gas designation G25 G30

Gas mixture in % CH4=86, N2=14 n-C4H10=50, i-C4H10=50

19.4Initial baking
When baking, use the shelf positions indicated. By burning the gas from the lower burner, heat is distributed in the oven. For this reason, the base of the food is baked better.

Recommended settings

Dish selection for the lower gas burner

Meal Sponge cake Sponge cake Basbousa (semolina cake with sugar syrup) Pasta bake Potato gratin, raw ingredients, 4 cm deep Vegetable terrine Small cakes
Biscuits
Simit (sesame-encrusted bread rings)
Puff pastry
Pies and tarts made from yufka dough
Pastries made from yeast dough
Pizza

Accessory/cookware
Bundt cake tin Springform cake tin, diameter 26 cm Ovenproof dish
Ovenproof dish Ovenproof dish
Clay pot with lid Universal pan or Baking tray Universal pan or Baking tray Universal pan or Baking tray Universal pan or Baking tray Universal pan or Baking tray Universal pan or Baking tray Universal pan or Baking tray

Shelf position 3 2 3 2 2 2 4
3
4
4
3
4
3

Temperature in Cooking time, °C/grill setting minutes

180

60­80

180

60­80

180

60­80

190

60­80

180

60­80

220

80­100

170

60­80

180

30­50

190

50­70

180

40­60

190

50­70

170

60­80

190

40­60

19.5Roasting and grilling
The setting values are based on the assumption that unstuffed, chilled, ready-to-roast poultry, meat or fish is placed into a cold cooking compartment. ¡ Turn the poultry, meat or fish after approx. 1/2 to
2/3 of the time listed. ¡ When you turn poultry, ensure that the breast side
or skin side is underneath to begin with.

¡ Use tongs to turn the pieces of food you are grilling. If you pierce the meat with a fork, the juices will run out and it will become dry.
¡ Only add salt to steaks once they have been grilled. Salt draws water from the meat.
Roasting and grilling on the wire rack Roasting on the wire rack works particularly well for large poultry or for multiple pieces at the same time.

26

How it worksen

¡ Depending on the size and type of the food to be roasted, add up to 1/2 litre water to the universal pan. You can make a sauce from the juices that are collected. This also means that less smoke is produced and the cooking compartment does not become as dirty.

¡ Use the protecting plate with the gas grill. The gas grill cannot be used without the protecting plate.
¡ Place the food to be grilled on the wire rack. In addition, slide the universal pan in at least one shelf position lower, with the slanted edge facing the appliance door. This means that any dripping fat is caught.

Recommended settings Dish selection for electric grill Meal

Accessory/cookware

Steak, 2 cm thick, x 2

Wire rack

Steak, 2 cm thick, x 2

Wire rack

Grilled sausages

Wire rack

Chicken leg, x 4

Wire rack

Fish, whole, grilled, 1 kg

Wire rack

Fish steak, grilled

Wire rack

Toasting bread, 4 slices

Wire rack

Toast with topping, x 4

Wire rack

1 Slide the universal pan underneath the wire rack.

Shelf position 4 4 4 4 4 4 4 4

Temperature in Cooking time, °C/grill setting minutes
30­401 30­401 10­201 40­501 35­451 35­451
2­4
3­5

19.6Yoghurt
You can also use your appliance to make your own yoghurt.
Making yoghurt 1. Remove the accessories and shelves from the
cooking compartment. 2. Heat 1 litre of milk (3.5% fat) to 90 °C on the hob
and then leave it to cool down to 40 °C. Only heat UHT milk to 40 °C.

3. Stir 30 g yoghurt into the milk. 4. Pour the mixture into small containers, e.g. small
jars with lids. 5. Cover the containers with film, e.g. cling film. 6. Place the containers on the cooking compartment
floor. 7. Press the illuminated button. 8. After making the yoghurt, leave it to cool in the refri-
gerator.

Recommended settings

Yoghurt

Meal Yoghurt

Accessory/cookware Cup/jar

Shelf position Cooking compartment floor

Type of heating/ function

Temperature in °C –

Cooking time, minutes 4­5 hours

19.7Tips for keeping acrylamide levels to a minimum when cooking
Acrylamide is harmful to your health and is produced when you cook cereal and potato products at very high temperatures.

Meal General information
Oven chips

Tip ¡ Keep cooking times as short as pos-
sible. ¡ Cook food until it is golden brown, but
not too dark. ¡ Use large, thick pieces of food. These
contain less acrylamide. ¡ Spread the chips out evenly and in a
single layer on the baking tray. ¡ Cook at least 400 g at once on a bak-
ing tray so that the chips do not dry out.

27

Installation instructions

20 Installation instructions Installationinstructions
The installation instructions contain instructions for the gas connection and for the gas conversion’s assembly . Note: For after-sales service only.
20.1General information Your appliance must only be converted from one gas type to another by authorised personnel who have received appropriate training. The procedure must always be carried out in accordance with the instructions in this manual. Incorrect connection and incorrect settings may damage the appliance. The appliance manufacturer shall accept no liability for incorrect connections or incorrect settings. ¡ Wear protective gloves so that you do not
cut yourself. Accessible parts may have sharp edges. ¡ Do not place the appliance behind a decorative door or the door of a kitchen unit. There is a risk of overheating. ¡ Never install the appliance in boats or in vehicles. ¡ Always closely observe the symbols on the rating plate. If there is no symbol that is relevant to your country, comply with the technical guidelines in force in your country when configuring the appliance settings. ¡ Find out which gas type and which gas pressure your local gas supply network uses before installing the appliance. Before using the appliance, ensure that all settings have been set correctly. ¡ Always comply with local and national guidelines and regulations. ¡ The settings for configuring your appliance can be found on the rating plate on the rear of the appliance. The gas type set at the factory is marked with an asterisk (*).

¡ After converting the appliance from one gas type to another, the new gas type must be labelled on the rating plate.
­ Use the gas conversion label to do this. ­ (*) is used to indicate the gas type on the label. ­ Stick the label on which the gas conversion is
marked with a star (*) in the designated location on the rating plate.
¡ The changes made to the appliance and the type of connection are essential to enabling the appliance to work safely and in accordance with the relevant regulations.
¡ Switch off the power supply and gas supply before carrying out any work.
¡ After working on the gas connection, always check that the connection is not leaking. The manufacturer accepts no responsibility for a gas leak at a manipulated gas connection.

WARNING Risk of explosion! A gas leak could occur. If you move the appliance after the gas supply has been established, a gas leak could occur. Do not move the appliance once the gas
supply is connected. If you move the appliance, check that the
connections are not leaking.

ATTENTION!

Do not hold and move the appliance at the

gas pipe (collector). Damage to the gas pipe

may lead to gas leak. The gas pipe is not de-

signed for the weight of the appliance.

Do not hold and move the appliance at the gas pipe.

20.2Appliance information

Enter the factory settings for the gas type and gas pressure in the table below and then add the applicable gas type and gas pressure settings for once conversion has been carried out.

E no.

FD

After-sales service telephone number

Type of gas/gas pressure The data can be found on the rating plate.

Type of gas/gas pressure Data following gas conversion

28

20.3Selecting the gas connection side
On many appliances, you can carry out the gas connection on the right- or left-hand side. If necessary, you can change the connection side. Requirements ¡ Shut off the main gas line. ¡ Seal the gas connecting piece on the side that is not
being used with a blind plug. 1. Place the new seal in the blind plug. Ensure that the
seal is seated correctly. 2. Note: Use a torque wrench when connecting the ap-
pliance. Secure the gas connecting piece to the appliance using a 22 mm spanner and place the blind plug onto the connecting piece using a 24 mm spanner.

Installation instructionsen
Connection in accordance with EN ISO 228-1 G½ (TS EN ISO 228-1 G½) 1. Insert the new seal in the connecting piece. Ensure
that the seal is seated correctly. 2. Secure the gas connecting piece to the appliance
using a 22 mm spanner and place the connecting piece into the connecting piece using a 24 mm spanner.

SW 22
SW 24
20-25 Nm
3. After changing the connection side, carry out a leak test. You can find additional information about this in the section entitled “Leak and function test” Page 34.
20.4Gas connection
These instructions apply only if the appliance is installed in countries that are specified on the rating plate. If the appliance is installed and used in a country that is not specified on the rating plate, add installation and assembly instructions that contain the necessary information for the connection conditions for the appliance in the respective country. Note: Use a torque wrench when connecting the appliance. Natural gas connection (NG) If you are using natural has (NG), the gas supply should be connected via a gas pipe or a safety gas hose with threaded fittings at both ends. Connection types: ¡ *G½: EN ISO 228 G½ (TS EN ISO 228 G½) ¡ *R½: EN 10226 R½ (TS 61-210 EN 10226 R½)
WARNING Risk of explosion! A gas leak may occur due to a damaged connection nozzle. When connecting the gas pipe or safety gas hose,
never tighten the gas connecting piece on the appliance using a 22 m spanner. This may damage the connecting piece.

3. Place the new seal into the gas pipe or safety gas hose. Ensure that the seal is seated correctly.
4. Secure the connecting piece using a 24 mm spanner. Use a 24 mm spanner to place the threaded fitting of the gas pipe or safety gas hose on the connecting piece and tighten it firmly.
5. Open the gas connection shut-off. Carry out a leak test Page 34.
Connection in accordance with EN 10226-1 R½ (TS 61-210 EN 10226-1 R½) 1. Insert the new seal in the connecting piece. Ensure
that the seal is seated correctly. 2. Secure the gas connecting piece to the appliance
using a 22 mm spanner and place the connecting piece into the connecting piece using a 24 mm spanner.

29

enInstallation instructions 3. Secure the connecting piece using a 24 mm span-
ner. Use a 24 mm spanner to place the threaded fitting of the gas pipe or safety gas hose on the connecting piece and tighten it firmly.

3. Fit the safety gas hose and use a pipe union or cable clamp to tighten it securely.

4. Open the gas connection shut-off. Carry out a leak test Page 34.
Liquefied gas connection (LPG) If you use liquefied gas (LPG), establish the gas connection via a gas hose or a fixed connection. Observe the specific guidelines for each country. If you are using a gas hose, observe the following: ¡ Use a safety gas hose or a plastic gas hose with a
diameter of 8 or 10 mm. ¡ Secure the hose to the gas connection using an ap-
proved connecting device, e.g. a hose clamp. ¡ The hose must be short and completely leak-tight.
The hose must not be longer than 1.5 m. Observe the applicable guidelines. ¡ Replace the gas hose once a year.
Connection with the gas hose 1. Insert the new seal in the connecting piece. Ensure
that the seal is seated correctly. 2. Secure the gas connecting piece to the appliance
using a 22 mm spanner and place the connecting piece into the connecting piece using a 24 mm spanner.

4. Open the gas connection shut-off. Carry out a leak test Page 34.
20.5Converting the gas type
You can convert the type of gas that has been set for the appliance. Note: You can find more information about which gas types can be used with the appliance and the appropriate gas nozzles in the section entitled “Technical data ­ Gas” Page 35. The numbers on the burners refer to their diameter. Converting the gas type ¡ Replacing the gas connection part. ¡ Replace the burner nozzles. ¡ Depending on the gas setting that is configured at
the factory, replace or tighten the bypass nozzles of the burner taps. ¡ If the nozzles for the oven burner and the grill burner are present, replace these. After conversion ¡ Always test for leaks after converting the appliance to a different gas type. You can find additional information about this in the section entitled “Leak and function test” Page 34. ¡ The burning behaviour must be checked after the product has been converted to a different gas type. You can find additional information about this in the section entitled “Checking the correct burner behaviour” Page 35. ¡ Enter the newly set type of gas and gas pressure in the table. You can find additional information about this in the section entitled “Appliance information” Page 28. ATTENTION! After converting the type of gas, label the type of gas that is now set. After converting the type of gas, affix the label with the specification of the gas type and the star shape at the designated location on the appliance’s rating plate.
Parts for the gas conversion The parts that you need for the gas conversion procedure described here are listed below.

30

Note: The accessories supplied may differ depending on the appliance model. ¡ The gas connecting piece may vary depending on
the gas type and the country-specific regulations. ¡ In the “Technical data ­ Gas” Page 35 table, de-
termine the correct nozzle diameter. ¡ Always use a new seal. ¡ (*) Never establish a gas connection without these
parts. Explanation Bypass nozzle Burner nozzle (*) Seal (*) Connecting piece for natural gas (NG: G20, G25) ¡ TS 61-210 EN 10226 R½ ¡ EN 10226 R½ (*) Connecting piece for natural gas (NG: G20, G25) ¡ TS EN ISO 228 G½ ¡ EN ISO 228 G½ (*) Connecting piece for liquefied gas (LPG: G30, G31) Connecting piece Blind plugs (closure part)
Replacing the cooker burner nozzles 1. Switch off all of the knobs on the control panel. 2. Close the gas connection shut-off. 3. Remove the pan support grids or the pan support
racks and the burner parts. 4. Use the socket wrench 7 to remove the cooker
burner nozzles.
5. Look up the burner nozzles in the table. You can find additional information about this in the section entitled “Technical data ­ Gas” Page 35. Fit the new nozzles into the appropriate burners.

Installation instructionsen
6. After replacing the nozzles, check that there are no leaks. You can find additional information about this in the section entitled “Leak and function test” Page 35.
Adjusting or replacing bypass nozzles (small flame setting) You can set the minimum flame height for the burners via the bypass nozzles. Requirements ¡ Close the gas isolating equipment. ¡ Disconnect the appliance from the power supply. 1. Switch off all of the knobs on the control panel. 2. Remove the knobs one by one by holding them
tightly against the control panel and pulling them towards you slightly.
Converting the appliance from natural gas to liquefied gas If the appliance was set to natural gas at the time of delivery (factory setting) (NG: G20, G25) and is now being converted to liquefied gas for the first time (LPG: G30, G31): 1. In order to gain access to the bypass nozzles, re-
move the control panel. You can find additional information about this in the section entitled “Removing the control panel” Page 32. 2. Tighten the bypass nozzles as far as it will go. 3. Then carry out the steps described in the section entitled “Installing the control panel” Page 33. For ovens ­ converting the appliance from natural gas to liquefied gas If the appliance was set to natural gas at the time of delivery (factory setting) (NG: G20, G25) and is now being converted to liquefied gas for the first time (LPG: G30, G31): 1. In order to gain access to the bypass nozzles below the burner tap, remove the control panel. You can find additional information about this in the section entitled “Removing the control panel” Page 32. 2. Then tighten the bypass nozzle on the oven burner as far as it will go. 3. Then carry out the steps described in the section entitled “Installing the control panel” Page 33. Converting the appliance from liquid gas to natural gas If you convert the appliance from liquefied gas (LPG: G30, G31) to natural gas (NG: G20, G25) or if you already carried out this conversion and then undo this:
31

enInstallation instructions
1. Replace all of the bypass nozzles in the appliance. You can find additional information about this in the section entitled “Removing the control panel” Page 32.
2. Then carry out the steps in the section entitled “Replacing the bypass nozzles” Page 33.
3. Then carry out the steps described in the section entitled “Installing the control panel” Page 33.
Removing the control panel 1. If the appliance has an upper cover, remove this.
To do this, open the hob cover, grip the sides with both hands and pull it upwards. Ensure that you do not lose the hinges.

4. Remove the two screws (T20) at the front right and left of the hob panel. Do not remove the plastic parts that are located below these.
5. Note: To ensure that no scratches are formed on the matte glass plate, do not allow the underside of the hob to come into contact with objects. Hold the front section of the hob and tilt it upwards at a maximum angle of 30°. Secure the hob with the profile bar by placing it vertically on the front burner mount.

2. Remove the pan support grids or the pan support racks and the burner parts.

3. If burner connection screws are present on the hob, remove all of these.

6. Remove the plastic covers from the front profiles on the right and left. Ensure that the covers are not damaged or scratched. Unscrew the screws (T20) below these.

32

7. Remove the two screws (M4) that are uncovered when you remove the control knobs (T15).

Installation instructionsen 2. Select the appropriate replacement bypass nozzles
from the table. You can find additional information about this in the section entitled “Technical data ­ Gas” Page 35. 3. Check that the seals on the bypass nozzles are seated correctly and work properly. Only use bypass nozzles with absolutely faultless seals.

8. Grip the panel with both hands and slowly pull it upwards. Remove the panel from the fastening lugs. Then carefully pull the panel forwards to remove it. Ensure that the cables are not damaged and that the connections do not come loose.
Replacing bypass nozzles 1. Use a flat-head screwdriver (no. 2) to unscrew the
bypass nozzles. Remove the bypass nozzles.

4. Insert the new bypass nozzles and tighten them securely. Ensure that all bypass nozzles have been fastened to the correct taps.
5. At this stage, it is important to test for leaks. You can find additional information about this in the section entitled “Leak and function test” Page 34.
Fitting the control panel To reassemble, proceed in the reverse order of disassembly. 1. Take hold of the front panel with both hands and
carefully fit it into place. Ensure that the cables are not damaged and the connections do not come loose. Lower it slightly and insert it into the front panel. 2. Insert the screws (T15) (M4) that were removed from the control panel. 3. Insert and tighten the screws (T20) that were removed from the front profiles on the right and left. Attach the plastic covers. 4. Carefully install the hob. Ensure that the plastic parts which must remain underneath the screws do not fall out. Unscrew the two screws (T20) on the front left and right on the hob. If there are any burner connection screws, screw them all into the cooktop. 5. Install the burner bases in their respective positions according to their size. Make sure that the ignition plugs are placed in the appropriate openings next to the burner bases. Place the enamelled burner lids onto the centre of the appropriate lower parts of the burner and, in doing so, note the sizes. Fit the pan support grids and the pan support
racks. Ensure that the 80 mm pan support is fitted on the auxiliary burner. 6. If the appliance has a covering plate, hold it vertically by both sides and slowly reinsert it into the holder. 7. Carefully insert the knobs. At this stage, it is important to check that the gas burners are burning correctly. You can find additional information about this in the section entitled “Checking the correct burner behaviour” Page 35. 8. Check whether the appliance is working correctly.

33

enInstallation instructions
Replacing the oven gas burner Preparation ¡ Switch off all of the knobs on the control panel. ¡ Close the gas connection shut-off. ¡ Disconnect the appliance from the mains. Replacing the oven’s lower gas burner nozzle 1. Open the appliance door. 2. Undo the front screw on the appliance base plate.
Raise the front of the tray, pull it and remove it.

2. Undo the screw that holds the grill burner fastening plate and the grill burner together, then carefully pull the burner out towards the front. You should now be able to access the burner nozzle. Ensure that the connections for the thermocouple and the spark plugs are not damaged. Remove the nozzle for the gas grill burner in the oven using the socket wrench 7.

3. Undo the screw on the burner and carefully pull the burner forwards. You should now be able to access the burner nozzle. Ensure that the connections for the thermocouple and the spark plugs are not damaged. Remove the nozzle on the burner input in the rear area of the oven using the socket wrench 7.
4. Select the appropriate nozzle from the table depending on the new gas type. You can find additional information about this in the section entitled “Technical data ­ Gas” Page 35. Insert and tighten the new nozzle. At this stage, it is important to test for leaks. You can find additional information about this in the section entitled “Leak and function test” Page 34.
5. Insert the oven burner, making sure that the connections for the thermocouple and the spark plugs are not damaged. Screw in the loosened screw.
6. At this stage, it is important to check that the burner is burning correctly. You can find additional information about this in the section entitled “Checking the correct burner behaviour Page 35”.
7. Insert the bottom panel of the oven’s housing and screw it firmly in place.
Replacing the gas grill burner nozzle on the oven 1. Open the appliance door.

3. Select the appropriate nozzle from the table depending on the new gas type. You can find additional information about this in the section entitled “Technical data ­ Gas” Page 35. Insert and tighten the new nozzle. At this stage, it is important to test for leaks. You can find additional information about this in the section entitled “Leak and function test” Page 34.
4. Reinsert the oven’s grill burner, making sure that the connections for the thermocouple and the spark plugs are not damaged. Screw in the loosened screw.
5. Push in the seal on the burner until it is situated on the rear housing.
6. At this stage, it is important to check that the burner is burning correctly. You can find additional information about this in the section entitled “Checking the correct burner behaviour Page 35”.
20.6Leak test and function test
The leak test must be carried out by two people. WARNING Risk of explosion!
Sparks, flames or open flames may cause explosions during the leak and function test. Ensure that no sparks are produced. Do not use any fire or naked flames. Only check the leak tightness using a suitable foam. Gas leak ¡ Close the gas connection locking device. ¡ Ventilate the relevant location sufficiently. ¡ Check the gas and nozzle connections once more. ¡ Repeat the leak test Page 34.
Checking the gas connection 1. Open the gas connection shut-off. 2. Apply suitable foam around the gas connection. a If dispersions and bubbles occur on the foamy sur-
face and these indicate that gas is escaping, follow the instructions in the section entitled “What to do if there is a gas leak” Page 34. 3. Follow the same instructions for the part that is sealed with the blind plug.

34

Checking the cooker burner nozzles Check the leak tightness of each nozzle. 1. Open the gas connection shut-off. 2. To check, carefully cover the hole in the burner
nozzle with your finger or a special device. 3. Apply suitable foam around the nozzle. 4. Press on the burner knob and turn the knob anti-
clockwise. Gas therefore comes to the nozzle. a If dispersions and bubbles occur on the foamy sur-
face and these indicate that gas is escaping, follow the instructions in the section entitled “What to do if there is a gas leak” Page 34.
Checking the bypass nozzles Check the leak tightness of each bypass nozzle. 1. Open the gas connection shut-off. 2. To check, carefully cover the hole in the burner
nozzle with your finger or a special device. 3. Apply suitable foam around the bypass nozzle on
the burner that is to be checked. 4. Press on the tap spindle and turn it anti-clockwise.
Gas therefore comes to the nozzle. a If dispersions and bubbles occur on the foamy sur-
face and these indicate that gas is escaping, follow the instructions in the section entitled “What to do if there is a gas leak” Page 34.
Checking the lower oven gas burner nozzle Check the leak tightness of each bypass nozzle. 1. Open the gas connection shut-off. 2. To check, carefully cover the hole for the burner
nozzle in the oven’s lower gas burner with your finger or a special device. 3. Apply suitable foam around the nozzle. 4. Press the function control knob for the oven and turn the knob anti-clockwise. Gas therefore comes to the nozzle. a If dispersions and bubbles occur on the foamy surface and these indicate that gas is escaping, follow the instructions in the section entitled “What to do if there is a gas leak” Page 34.
Checking the lower oven gas grill nozzle Check the leak tightness of each bypass nozzle. 1. Open the gas connection shut-off. 2. To check, carefully cover the hole for the burner
nozzle in the oven’s lower gas grill burner with your finger or a special device. 3. Apply suitable foam around the nozzle. 4. Press the function control knob for the oven and turn the knob anti-clockwise. Gas therefore comes to the nozzle. a If dispersions and bubbles occur on the foamy surface and these indicate that gas is escaping, follow the instructions in the section entitled “What to do if there is a gas leak” Page 34.
20.7Checking the correct burner behaviour
Check the burning and soot formation of each burner after the product has been converted to a different gas type. If there is a problem, compare the nozzle values with the values in the table.

Installation instructionsen

Checking the correct burner behaviour of the cover burner 1. Ignite the gas cooker burners in accordance with
the instructions in the operating manual. “Operating the hotplate”, Page 15 2. Set the gas cooker knob to the small flame setting. Check whether the flame safety system is working by keeping the flame at the “small flame” setting for one minute. 3. Check that the burners are burning correctly with both large and small flames. a The flame must burn evenly and steadily. 4. Turn the burner knob back and forth quickly between the large flame setting and the small flame setting. Repeat this process several times. a The gas flame must not flicker or go out.
Checking the correct burner behaviour for the lower oven gas burner 1. Ignite the lower oven gas burner in accordance with
the instructions in the operating manual. “Basic operation”, Page 16 2. Open the oven door and observe the flame. a The flame must burn evenly. a The flame may fail during the first few minutes. However, the flame must stabilise after a few minutes. 3. Switch on the appliance for a few minutes to check whether the thermocouple becomes sufficiently warm. a Adjust the settings, if required. If the bypass nozzle on the burner is faulty, replace this.
Checking the correct burner behaviour for the lower oven gas burner 1. Ignite the gas grill burner in the oven in accordance
with the instructions in the operating instructions. “Basic operation”, Page 16 2. Open the oven door and observe the flame. a The flame must burn evenly. a The flame may fail during the first few minutes. However, the flame must stabilise after a few minutes. 3. Switch on the appliance for a few minutes to check whether the thermocouple becomes sufficiently warm. a Adjust the settings, if required. If the bypass nozzle on the burner is faulty, replace this.

20.8Technical data ­ Gas

The different types of gas and the corresponding values are listed.

Information on some types of gas Note the following information for the gas types that are listed in the table for some burners.

Type of gas G20/25 (20/25 mbar) G2.350 (13 mbar) G30 (50 mbar)

Explanation For France and Belgium
For Poland
The after-sales service must order the nozzle set HEZ298070.

35

enInstallation instructions

Nozzle values for the auxiliary burner Note the following information for the gas types that are listed in the table for some burners.

Gas pressure (mbar)
Nozzle (mm) Bypass nozzle (mm) Max. input power (kW) Min. input power (kW) Gas flow at 15 °C and 1013 mbar m3/h Gas flow at 15 °C and 1013 mbar g/h

G20/ G25 20/25
0.72 0.50 1 0.55 0.095/ 0.111 –

G20 G20 G25 G25 G25.3 G30/G31

20
0.72 0.50 1 0.55 0.095

25
0.68 0.50 1 0.55 0.095

20
0.77 0.50 1 0.55 0.111

25
0.72 0.50 1 0.55 0.111

25
0.72 0.50 1 0.55 0.108

28­ 30/37 0.50 0.30 1 0.55 –

–

–

–

–

–

73/71

G30
50
0.43 0.30 1 0.55 –
73

G30
37
0.47 0.30 1 0.55 –
73

G27
20
0.77 0.50 1 0.55 0.116
–

Nozzle values for the standard-output burner Note the following information for the gas types that are listed in the table for some burners.

Gas pressure (mbar)
Nozzle (mm) Bypass nozzle (mm) Max. input power (kW) Min. input power (kW) Gas flow at 15 °C and 1013 mbar m3/h Gas flow at 15 °C and 1013 mbar g/h

G20/ G25 20/25
0.97 0.58 1.75 0.9 0.167/ 0.194 –

G20 G20 G25

20

25

20

0.97 0.58 1.75 0.9 0.167

0.91 0.58 1.75 0.9 0.167

1 0.58 1.75 0.9 0.194

–

–

–

G25 G25.3 G30/G31

25
0.94 0.58 1.75 0.9 0.194

25
0.94 0.58 1.75 0.9 0.190

28­ 30/37 0.65 0.38 1.75 0.9 –

–

–

127/125

G30
50
0.58 0.38 1.75 0.9 –
127

G30
37
0.62 0.38 1.75 0.9 –
127

G27
20
1 0.58 1.75 0.9 0.203
–

Nozzle values for the high-output burner Note the following information for the gas types that are listed in the table for some burners.

Gas pressure (mbar)
Nozzle (mm) Bypass nozzle (mm) Max. input power (kW) Min. input power (kW) Gas flow at 15 °C and 1013 mbar m3/h Gas flow at 15 °C and 1013 mbar g/h

G20/ G25 20/25
1.16 0.75 3 1.3 0.285/ 0.332 –

G20 G20 G25

20

25

20

1.16 0.75 3 1.3 0.285

1.10 0.75 3 1.3 0.285

1.34 0.75 3 1.3 0.332

–

–

–

G25 G25.3 G30/G31

25
1.26 0.75 3 1.3 0.332

25
1.26 0.75 3 1.3 0.325

28­ 30/37 0.85 0.46 3 1.3 –

–

–

218/214

G30
50
0.75 0.46 3 1.3 –
218

G30
37
0.80 0.46 3 1.3 –
218

G27
20
1.38 0.75 3 1.3 0.348
–

Nozzle values for the lower burner in the gas oven with thermostat Note the following information for the gas types that are listed in the table for some burners.

Gas pressure (mbar) Nozzle (mm)

G20/G25 20/25
1.16

G20 20
1.16

G20 25
1.10

G25 20
1.34

G25 25
1.21

G25.3 25
1.21

G30 28­ 30 0.85

G30 50
0.75

36

Installation instructionsen

Bypass nozzle (mm) Max. input power (kW) Min. input power (kW) Gas flow at 15 °C and 1013 mbar m3/h Gas flow at 15 °C and 1013 mbar g/h

G20/G25 0.76 3 0.285/0.332 –

G20 0.76 3 0.285 –

G20 0.67 3 0.285 –

G25 0.80 3 0.332 –

G25 0.70 3 0.332 –

G25.3 0.70 3 0.325 –

G30 0.48 3 218

G30 0.45 3 218

Nozzle values for the gas grill burner ­ gas oven Note the following information for the gas types that are listed in the table for some burners.

Gas pressure (mbar)
Nozzle (mm) Bypass nozzle (mm) Max. input power (kW) Min. input power (kW) Gas flow at 15 °C and 1013 mbar m3/h Gas flow at 15 °C and 1013 mbar g/h

G20/G25 20/25
1.00 2.1 0.2/0.233 –

G20 20
1.00 2.1 0.2 –

G20 25
0.98 2.1 0.2 –

G25 20
1.13 2.1 0.233 –

G25 25
1.10 2.1 0.233 –

G25.3 25
1.10 2.1 0.228 –

G30 28­ 30 0.70 2.1 153

G30 50
0.62 2.1 153

37

Thank you for buying a Bosch Home Appliance!
Register your new device on MyBosch now and profit directly from: · Expert tips & tricks for your appliance · Warranty extension options · Discounts for accessories & spare-parts · Digital manual and all appliance data at hand · Easy access to Bosch Home Appliances Service Free and easy registration ­ also on mobile phones: www.bosch-home.com/welcome
Looking for help? You’ll find it here.
Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.
BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY www.bosch-home.com A Bosch Company
*9001695904*
9001695904(031212) en

Documents / Resources

BOSCH HGA120B51M Free standing Gas cooker Freestanding Electric Ceramic Cooker Stainless Steel [pdf] User Manual HGA120B51M, HGA120B51M Free standing Gas cooker Freestanding Electric Stainless Steel, HGA120B51M, Free standing Gas cooker Freestanding Electric Stainless Steel, standing Gas cooker Freestanding Electric Stainless Steel, Gas cooker Freestanding Electric Stainless Steel, cooker Freestanding Electric Stainless Steel, Freestanding Electric Stainless Steel, Electric Stainless Steel, Stainless Steel, Steel

References

• Home Appliances Global Website | Bosch
• Home Appliances Global Website | Bosch
• Bosch Service | Service worldwide
• Welcome to MyBosch
• User Manual