equip KVM-9036 USB KVM Extender Installation
Product Information
The CAT5 USB KVM Extender is a device that allows you to extend the distance between a computer and a console (monitor, keyboard, and mouse) using a CATx UTP cable. It consists of a Transmitter (Tx) unit, a Receiver (Rx) unit, USB KVM cables, and power adapters. The Transmitter unit is connected to the local computer, while the Receiver unit is connected to the remote console. The Transmitter unit features a computer port (HDB-15 VGA) for connecting to the local computer using a special 3-in-1 KVM Combo-free cable. It also has an upgrade port (USB Type B) for firmware upgrades. The Receiver unit features an OSD (on-screen display) menu that allows users to configure various settings. The OSD menu can be navigated using the Esc, Left/Right cursor, Up/Down cursor, and F1 keys. The Receiver unit also has a power LED, a link LED, USB keyboard and mouse connectors, a toggle button for switching between local and remote computers, and LEDs indicating the active computer. The product supports hotkey sequences for switching between local and remote computers. The hotkey sequence on the Receiver Console can be customized, while the hotkey sequence on the Transmitter Console is always Scroll Lock + Scroll Lock. The product also features a deadlock function that prevents simultaneous usage by multiple users. The deadlock is indicated by flashing LEDs on the Transmitter unit. For optimized video output on the remote console, users can adjust various parameters. The product automatically adjusts the blue component color in proportion to the red and green colors, eliminating the need for manual adjustment. The product also offers an auto-logout feature that can be enabled or disabled. The auto logout timeout can be configured from 0 to 10 minutes. If password protection is not enabled, the auto-logout feature will not be activated.
Product Usage Instruction
- Connect the Transmitter unit to the local computer using the special 3-in-1 KVM Combo-free cable.
- Connect the Receiver unit to the remote console (monitor, keyboard, and mouse) using the appropriate cables.
- Use a CATx UTP cable to connect the Transmitter unit and the Receiver unit. The maximum distance supported is 100 meters.
- Connect the power adapters (DC5V) to both the Transmitter unit and the Receiver unit.
- Power on the Transmitter unit and the Receiver unit. The power LEDs should light up.
- On the Receiver unit, use the OSD menu to configure various . Use the Esc key to exit, the Left/Right cursor keys to change values, the Up/Down cursor keys to navigate, and the F10 key to log from the OSD menu.
- To switch between the local and remote computers, use the customizable hotkey sequence on the Receiver Console. By default, the hotkey sequence is Scroll Lock + Scroll Lock.
- If simultaneous usage by multiple users is not allowed, wait for the first user to release control before another user can start using.
- If you want to adjust video display parameters on the remote console, refer to the next section in the user manual for guidance.
- To load the factory default settings, use the Load Default Settings option available on the Receiver unit’s front panel.
Installation diagram
- Transmitter (Tx) Unit x 1
Receiver (Rx) Unit x 1- USB KVM Cable x 2
- Power Adapters (DC5V) x
- Quick Installation Guide x
Transmitter Unit
(Local )End Connection) 
[Tx – Front-panel]
- a. Power LED (Lights when power is on)
- b. Link LED (Lights when link is on)
- c. USB keyboard connector
- d. USB mouse connector
- e. Select Button for Receiver Mode (View Only/Full Access/Access Deny)
- f. Video LED (Lights when Remote Console monitor is on)
- g. Control LED (Lights when Remote Console is on)
[Tx – Back panel]
- h. Power jack (DC5V, center-positive)
- i. CAT5 Extension Port [RJ-45, connect to the Receiver Unit via a CATx UTP cable, 100 Meter max.]
- j. Computer port [HDB-15(VGA), connect to the (Local)computer using a special 3-in-1 KVM Combo-free cable] Upgrade port (USB Type B, dedicated for firmware upgrade use)
Receiver Unit
(Remote End Connection)
[Rx-front panel]
- Power LED (Lights when power is on)
- Link LED (Lights when link is on)
- USB keyboard connector
- USB mouse connector
- Toggle Button for Local / Remote Computers
- Local Computer LED (Lights when Local computer active)
- Remote Computer LED (Lights when Remote computer active)
[RX-back-panel] - Power jack (DC5V, center-positive)
- CAT5 Extension Port [RJ-45, connect to the (Remote) computer via a CATx UTP cable, 100 Meter max
- Computer port [HDB-15(VGA), connect to the (Local) computer using a special 3-in-1 KVM Combo-free cable]
- Upgrade Port (USB Type B, dedicated for firmware upgrade use)
- Console Video port [HDB-15(VGA), connect to monitor]
Hotkey sequence = [Scroll Lock]* + [Scroll Lock]* + H +(y)*(y) = CAPS, F12 or NUM
On the Receiver Unit, the OSD (on-screen display) Menu control is available to facilitate more intuitive operations. Users can configure various settings by the OSD Menu:
OSD Menu
To navigate the OSD Menu, just use the following keys
- Esc: Exit,
Left/Right cursor: change value in the menu option
Up/Down Cursor: Navigate.- F10: Logout the OSD Menu (However, if the password protection is not enabled, the Logout feature will not be available)
Note that the hotkey preceding sequence setting on the Receiver Console will not affect the hotkey preceding sequence on the Transmitter Console, which will always allow Scroll Lock + Scroll Lock as preceding hotkey. In addition to using the hotkey command and can also use the OSD menu to change the hotkey preceding sequence. Please refer to the previous section.
- Auto logout: [0 ~ 10]
Disable / Enable the Logout timeout (0~10min, 0 = Disable).
The Auto logout time can be configured from 0 (Disable), right up to 10 Min. If the password protection is not enabled, the Auto logout will not be put into function. - Hotkey: [Scroll Lock (Default)]
To change the preceding sequence hotkey by pressto select the CAPS, F12 or NUM. - OSD Timeout: [0~60]
Configured the OSD timeout value, starting at 20 seconds, with an increment of 5 up to 60 seconds (0~60 seconds, 0 = Disable). - Off Shared Console
Configured the Console Control [(Disable/Enable the timeout value (0~30 seconds, 0= Disable)]
Note: Local and Remote switching engaged priority offers “Deadlock Functional”, the deadlock function to protect while one user (either one) was using, the other user have to wait until the first user released the process, then the other user can start to use.
When the deadlock is active, the Transmitter’s LED “Video” & “Control” is flashing, until the user releases the process control.
- The blue component color is adjusted automatically as in proportion to the red and green. Users do no need to adjust themselves.
- In order to achieve optimized video output on the console that may be 100M Meters away from the computer, users could adjust these various parameters conscientiously to achieve an optimized video output on the console monitor. For a general guideline of how to adjust your video display parameters on the remote console, please refer to next section, Optimize the Video Display on the Remote Console.
Load Default Settings
Load the factory default settings.
FCC / CE Statements
FCC Statement: This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this Quick Installation Guide, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case, the user will be required to correct the interference at his/her own expense. CE Statement: This is a Class B product in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
Specifications
| Model No. | KVM-9036 CAT5 KVM Extender |
| Component Units | 1 x TX (transmitter w/ a console)
1 x -RX (receiver w/ a console & built-in KVM switching function) |
| Console Keyboard &
mouse support |
USB |
| Computer connection | USB |
| Number of Console | 1 x local console (on TX unit) 1 x remote console (on RX unit) |
| Max. PC Connections | 1 x computer for TX
2 x computer for RX (1 x computer 100M max. away + 1 x computer in proximity) |
| RX Connectors | 1 x HDB 15-pin Female (for VGA monitor)
1 x HDB 15-pin Female (for computer- integrated with video, keyboard and mouse) 1 x USB Type B Upgrade port 2 x USB Type A –for keyboard & mouse 1 x RJ45 1 x DC5V power jack |
| TX Connectors | 1 x HDB 15-pin Female (for VGA monitor)
1 x HDB 15-pin Female (for computer- integrated with video, keyboard and mouse) 1 x USB Type B Upgrade port 2 x USB Type A – for keyboard & mouse 1 x RJ45 1 x DC5V power jack |
| DDC/EDID Emulation | 2 Modes – Local Monitor / Remote Monitor DDC Emulation |
| OSD | Yes |
| LEDs | [On receiver] 1 x Red – Power 1 x Green – Link
1 x Green– Local (lit – Local computer active) 1 x Green– Remote (lit – Remote computer active -lit) [On transmitter] 1 x Red – Power 1 x Green – Link 1 x Green– Video (lit – Video active for remote console) 1 x Green – Control (lit – Keyboard & mouse control available for remote console) |
| Keyboard/Mouse
Emulation |
USB |
| Skew Compensation | No |
| Extension Distance | 100M |
| VGA Resolution | 1920 x 1200 |
| Case | Metal |
| Power Adapter | DC 5V |
| Safety / Emission | FCC, CE |
Features
- 100M CAT5 extension distance
- Built-in KVM Switching feature on the Receiver Unit
- Local / Remote computer selection on the Receiver console by a switch button and keyboard hotkeys
- Remote Console Access Mode Selection for ON/OFF/View Only by switch buttons and keyboard hotkeys
- USB connectivity support on the console and computer side
- OSD Menu-driven control for easy system configuration
- Keyboard hotkey control for configuration and operation
- Full keyboard and mouse emulation to support Microsoft and Logitech standard 5 key mice and compatibles.
- DDC/EDID support mode selection for Local / Remote Monitor by OSD and keyboard hotkeys
- Easy plug-and-play to extend your second console up to 100 Meters away
- Analog video resolution supports up to 1920 x 1200
- Firmware upgradeable via USB interface
Documents / Resources
 |
equip KVM-9036 USB KVM Extender [pdf] Installation Guide KVM-9036 USB KVM Extender, KVM-9036, USB KVM Extender, KVM Extender, Extender |
