Harvest-Tec

HARVEST TEC 491 110 Gallon Preservative

HARVEST-TEC-491-110-Gallon-Preservative

Product Information

Specifications:

  • Model: 491
  • Capacity: 100 & 110 Gallon
  • Installation Manual: 491-15-INST 1/23

Product Usage Instructions

Installation of Applicator:

Installation of Saddle, Legs & Mounting on Baler

Compatible Balers: Hesston, New Idea, Challenger, and Case 8570, 8575, 8580, 8585, 8590 Balers

Steps:

  1. Locate the parts bag and retrieve the saddle legs (001-6707C) and saddle (001-6707A).
  2. Install both saddle legs onto the saddle using eight 3/8 x 1-1/4 bolts, locks, and flat washers. The mounting slots in the legs should attach to the second and third weld nuts from each end of the saddle on both sides.
  3. Loosely attach the legs and saddle. Measure the distance from the top outside corners of the bale chamber where the saddle will be attached. Adjust the legs to match this dimension and center the saddle accordingly. Do not fully tighten the bolts until the unit is mounted on the baler.

Frequently Asked Questions (FAQ)

Q: What tools are needed for installation?
A: The following tools are required for installation:

  • Standard wrench set
  • Electric drill and bits
  • Standard nut driver set
  • Hose cutter
  • Crescent wrench
  • Standard screwdriver
  • Standard socket set
  • Center punch
  • Side cutter
  • Hammer
  • Metal cutting tools

Harvest Tec LLC. Warranty and Liability Agreement
Harvest Tec, LLC. will repair or replace components that are found to be defective within 12 months from the date of manufacture. Under no circumstances does this warranty cover any components which in the opinion of Harvest Tec, LLC. have been subjected to negligent use, misuse, alteration, accident, or if repairs have been made with parts other than those manufactured and obtainable from Harvest Tec, LLC. Our obligation under this warranty is limited to repairing or replacing free of charge to the original purchaser any part that in our judgment shows evidence of defective or improper workmanship, provided the part is returned to Harvest Tec, LLC. within 30 days of the failure. If it is determined that a non-Harvest Tec branded hay preservative has been used inside the Harvest Tec applicator system where the failure occurred, then Harvest Tec reserves the right to deny the warranty request at their discretion. Parts must be returned through the selling dealer and distributor, transportation charges prepaid. This warranty shall not be interpreted to render Harvest Tec, LLC. liable for injury or damages of any kind, direct, consequential, or contingent, to persons or property. Furthermore, this warranty does not extend to loss of crop, losses caused by delays or any expense prospective profits or for any other reason. Harvest Tec, LLC. shall not be liable for any recovery greater in amount than the cost or repair of defects in workmanship. There are no warranties, either expressed or implied, of merchantability or fitness for particular purpose intended or fitness for any other reason. This warranty cannot guarantee that existing conditions beyond the control of Harvest Tec, LLC. will not affect our ability to obtain materials or manufacture necessary replacement parts. Harvest Tec, LLC. reserves the right to make design changes, improve design, or change specifications, at any time without any contingent obligation to purchasers of machines and parts previously sold. Revised 6/22

Documents / Resources

HARVEST TEC 491 110 Gallon Preservative [pdf] Instruction Manual
491 110 Gallon Preservative, 491, 110 Gallon Preservative, Gallon Preservative

References

Leave a comment

Your email address will not be published. Required fields are marked *