HOMCOM A90-248 Electric Treadmill

HOMCOM A90-248 Electric Treadmill

Important Information

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

Thanks for choosing this home electric treadmill. The familiar you are with your treadmill, the easier you will find to use, so please read these instructions carefully before you start using the treadmill.
All parts of the machine are made of high-quality materials and have passed a series of inspection and testing to ensure maximum product quality. Refer to this manual for assembly instructions, use and maintenance of this treadmill.

SAFETY INFORMATION

Please read all contents of this manual carefully before use for the safety of all users. We are not liable for any injuries because of improper operation.

Symbol RISK
Please do not use the heart rate device together with other wireless heart monitors as it can cause an electrical
interference.
Symbol WARNING
Please follow the instructions below to avoid any accidents to you or others

  1. Before using the treadmill, please ensure the treadmill is fully grounded to avoid accidents and dangers.
  2. When running, please clamp the safety lock (red) clip in the proper position of the clothes to facilitate an emergency to pull off the safety lock and stop the machine safely.
  3. Before the fitness exercise, please consult your health care doctor.
    1. Please wear appropriate sportswear for exercise (do not wear soft-soled shoes for running, otherwise the shoe scraps will get caught in the motor and control system, causing the machine to malfunction).
    2. Keep the room clean and tidy: avoid dirt being absorbed into the treadmill, which will cause operating multifunction.
    3. The user’s weight should not exceed 100kg
  4. This product is for use by one person only. Do not let children or pets play on or around to avoid accidents.
  5. The minimum spacing required for the treadmill, after setup, (the distance from the wall and furniture), the front and the sides should not be less than 100CM and the rear not less than 200CM.
  6. Do not use the unit if the power cord is damaged.
  7. If the treadmill is damaged or broken, do not use the unit and contact your local dealer for repair.
  8. Do not touch any moving parts with your hands. Do not press or insert any objects into the unit.
  9. This machine is suitable for indoor use only and should not be used outdoors or in a gym.
  10. Place the treadmill on a clean, level surface and in a well-ventilated room. Ensure there are no sharp objects nearby. Do not use near water and fire sources.
  11. Please use the handrail when stepping on and off the machine. Ensure the treadmill has come to a complete stop before stepping off. In case of an emergency, you must unplug the safety lock: the treadmill will stop immediately.
  12. Do not operate the treadmill if you use oxygen equipment.
  13. To maintain the normal operation of this unit, do not install any accessories that are not provided by the original manufacturer on this unit.
  14. All parts of the machine must be kept secure.
  15. Please switch off the power and unplug the power cable after using the treadmill.

PACKAGE SPECIFICATIONS

Number Spare parts
1 Frame

 Package Specifications

2 Manual

 Package Specifications

3 Screw bag Listed below.
4 Display

 Package Specifications

Screw Bag

Screw Bag

ASSEMBLY SPECIFICATIONS

Step 1: Connect part F #M8*45 screws on the screen with part G#M8 nut, then connect signal wires together.
Pull up the electronic watch in the direction of the arrow and fix it on the column with part E #M8*15 screws and part D #M8 flat pads.

Assembly Specifications

Step 2: Pull up the column and fix it on the frame with part E (# M8*15) screws and part D (#M8) flat pad.

Assembly Specifications

If the treadmill you purchased is a multi-functional treadmill, please continue the installation in the following steps:

Number Parts Description
4 Message Helmet

Assembly Specifications

5 Screw

Assembly Specifications

6 Gasket

Assembly Specifications

ELECTRONIC CONTROL INSTRUCTIONS

Electronic Control Instructions

Electronic Control Instructions
  1. “SPEED”:
    The current speed value is displayed in the running state, and the speed display range is 1.0-12KM / H. During the countdown, “3”, “2”, and “1” are displayed.
  2. “TIME”
    Displays exercise time. The display will count from 0:00 to a maximum of 99:59. Once the counter reaches the selected time, the display will countdown to 0:00 from the set time, when the countdown reaches 0:00, the
    treadmill will decrease speed slowly and come to a stop. Once the treadmill stops completely, it will enter standby mode.
  3. “DIS.”
    Displays the movement distance. The forward count will be from 0.0 – 99.9, and it will be re-counted after overflow. The reverse count will decrease from the set value to zero. When the countdown reaches 0, the treadmill will stop running at a steady speed and stop, and then enter the standby state after completely
    stopping.
  4. “CAL.”:
    Displays calories burnt value from 000-990 when counting forward, and recount after overflow, count down from set value to 0 when counting backward, when the treadmill is down smoothly when counting down to 0. “PULSE” heart rate window:
  5. “PULSE”
    When a heart rate signal is detected, the heart-shaped icon flashes, and the pulse value is displayed. When the treadmill is powered on, there is a heart rate display within 5 seconds of holding the heartbeat. The initial value is the actual measurement.
Key functions
  1. “PROG” is the program selection key: In standby mode, press this key first to select the built-in programs “P01-P02 -…- P12” in sequence-> Body fat test mode-> Manual mode->-.
  2. “MODE” is the mode selection key: Press this key to cycle through “15:00”, “1.0”, “50.0” (“15:00” is the time countdown mode, and “1.0” is the distance countdown mode, “50.0” is the calorie countdown mode.) When selecting various modes, you can use the setting plus and minus keys to set the relevant countdown value after completion, press the “START” key to start the treadmill.
  3. “START” is the start key: When the power is on and the safety lock is engaged, press this key at any time to start the running of the treadmill.
  4. “STOP” is the stop button: during the exercise, you can use this button to stop the running of the
    treadmill and reset it to zero. After stopping, press and hold the stop button to enter the sleep state.
    Press any button to wake up the meter.
  5. “+” and “-” are speed plus and minus keys: standby state, used to adjust the set value. It is used to adjust
    the speed after startup. The adjustment range is 0.1km/time. Continue to press and hold for more than 1
    second to automatically increase for decrease.
  6. Speed key: 6-9KM /H.
  7. “Previous song” “Next song” Bluetooth music fast switching III.

QUICK START (MANUAL MODE)

  • Turn on the power switch and properly attach the magnetic safety lock to the safety lock position under the panel.
  • Press the “START” key, the system enters a 3 second countdown, the buzzer sounds, and the speed window displays the countdown. At the end of the 3 second countdown, the treadmill starts running at a speed of 1.0KM/H.
  • After starting, you can use the “+” and “-” keys to adjust the speed of the treadmill as needed.
    Operations during exercise
  • Pressing the “+” or “-” button will increase/ decrease the running speed of the treadmill.
  • Press the “STOP” button to reduce the running speed to stop running.

Manual mode

  • In the standby state, directly press the “START” key, the treadmill starts running at a speed of 1.0KM/H; other windows start counting from 0 and press the “+” and “-” keys to change the speed.
  • In the standby state, press the “MODE” key to enter the time countdown mode. The “TIME” window displays “15:00” and blinks. Press the “+” and “-” keys to set the exercise time. The setting range is: 5: 00–99:00.
  • In the time countdown mode, press the “MODE” key to enter the distance countdown mode. The “DIS” window displays “1.0”and blinks. Press the “+” and “-” keys to set the movement distance and distance setting range. It is: 0.5-99.9.
  • In the distance countdown mode, press the “MODE” key to enter the calorie countdown mode. The “CAL” window displays “50.0” and blinks. Press the “+” and “-” keys to set the calories between 10.0 – 990.
  • Select one of the three countdown modes and press the “START” key after the setting is completed. The treadmill will start running after a delay of 3 seconds. Press the “+” and “-” keys to adjust the speed. The treadmill stops running.

Built-in programs

This system has 12 built-in programs (P01-P12). In standby mode, press the “PROG” key. The program window displays “P01” to select the program you like, and the “TIME” window flashes; the preset time is 30:00, press”+”,”-“Keys to set the required exercise time, and then press the “START “key to start the built-in program, the built-in program is divided into 10 segments, each segment of exercise time = set time / 10. When entering, there are 3 “Bi-Bi-Bi-” prompts in the system during one period. The speed of the system changes with the change of the program segment. During this period, you can press the “+” and “-” keys to change the speed, but it will resume when the program enters the next segment. At this speed, after running a program, the system will issue 3 beeps of “Bi-Bi- Bi”, the treadmill will stop running at a steady speed, and it will enter the standby state after stopping completely.

Physical Fitness Test (FAT)

In the standby state, continuously press the “Program” key to enter the body mass index (F-1) test, and the window displays”F-1″.
Press the “Mode” key to select the parameters to be set (F1–Sex, F2-Age, F3-Height, F4-Weight), and press the “Speed+” and “Speed-1” keys to set these parameters. After setting, press the “Mode” key to display F5.
Hold the pulse device and enter the physical fitness test to see if your weight and height are commensurate.
Body mass index (FAT) is a measure of the relationship between a person’s height and weight. It does not refer to the proportion of the body. FAT is suitable for any male and female. Together with other health indicators, it provides a basis for people to adjust weight. The ideal FAT should be between 20-25, if it is below 19 it means too thin, if it is between 25 and 29, it is overweight, and if it exceeds 30, it is considered obese. The parameter ranges are as follows.
(This data is for reference only and cannot be regarded as medical data.) When exiting the body fat test, press the “Program” key to exit.

01 Sex 01 Man 02Women
02 Age 10 – 99
03 Height
04 Weight
05 FAT ≤19 Underweight
(20—25) Normal weight
(25—29) Overweight
≥30 Obese

ENERGY SAVING MODE

In the standby mode, no operation machine enters the energy-saving mode for 10 minutes. At this time, the display will be blank, press any button to exit standby mode.

Time slot Program Set time / 10 = run time of each time slot
1 2 3 4 5 6 7 8 9 10
P1 SPEED 3 3 6 5 5 4 4 4 4 3
P2 SPEED 3 3 4 4 5 5 5 6 6 4
P3 SPEED 2 4 6 8 7 8 6 2 3 2
P4 SPEED 3 3 5 6 7 6 5 4 3 3
P5 SPEED 3 6 6 6 8 7 7 5 5 4
P6 SPEED 2 6 5 4 8 7 5 3 3 2
P7 SPEED 2 9 9 7 7 6 5 3 2 2
P8 SPEED 2 4 4 4 5 6 8 8 6 2
P9 SPEED 2 4 5 5 6 5 6 3 3 2
P10 SPEED 2 5 7 5 8 6 5 2 4 3
P11 SPEED 2 5 6 7 8 9 10 5 3 2
P12 SPEED 2 3 5 6 8 6 9 6 5 3

PROGRAM DESCRIPTION

Time set by time segment program / 10 = Run time of each segment, each program divides exercise time into 10 equal parts, and each time has a corresponding speed.
Display range of each value

Setting parameter Initial Initial Set the initial value Set range Show range
Time (minutes:seconds) 0:00 15:00 5:00-99:00 0:00-99:59
Slope (Segment)
Speed (KM/H) 1.0 1.0 1.0-12 1.0-12
Distance (km) 0.00 1.00 0.5-99.9 0.0-99.9
Heart rate (times/minute)
Calories (kcal) 0.0 50.0 10.0-990 0.0-990

SAFETY LOCK FUNCTION

Anytime during exercising, pulling off the safety lock will immediately stop the treadmill operation. After the emergency stop, the speed window will display the code “E07”, at this time the treadmill will shut down completely. The treadmill will not operate, until the safety lock has been re-installed correctly and the treadmill will go into standby mode, waiting for input instructions.

SHUT DOWN

The treadmill can be turned off at any time by turning off the power switch so that it does not damage the treadmill.
If you purchased a treadmill with Bluetooth music, please follow the following method after powering on:
Bluetooth Music: Enter the phone settings – Bluetooth – turn on Bluetooth – search device – Appears EsAudioV2.3 Bluetooth device name click pairing, pairing successfully returns to music APP to broadcast music.

MAINTENANCE INSTRUCTIONS

Proper maintenance keeps your treadmill in optimal condition, improper care and maintenance can result in an injury or shorten the life of the treadmill.

Warning: Always unplug the treadmill before cleaning or maintaining the appliance!

  1. Regularly remove dust to keep the parts clean.
  2. After each use of the treadmill, use a clean towel or cloth to clean the meter and other parts with sweat and debris. Please be careful not to splash water on any electrical components and under the running belt.
  3. Please place your treadmill in a clean and dry environment, ensure the power is turned off and the power cable has been unplugged.
  4. To facilitate easy movement, the treadmill is equipped with wheels, please ensure you disconnect the power supply and fold the body before moving.
  5. Check and lock all parts of the treadmill frequently.
  6. To maintain and extend the life of the treadmill, it is recommended that you rest the treadmill for 10 minutes after 30 minutes of continuous use.
  7. The running belt has been adjusted before leaving the factory, but after use, the running belt will be stretched and will deviate from the centre position, causing the running belt to rub the side bars and the rear cover and damage it. It is normal for the running belt to be forced to stretch during use. After using the treadmill for a period, if the running belt slips or is not smooth when using the treadmill, you can adjust the tightness of the running belt to improve it, as indicated below.
    Maintenance Instructions
Running belt loose adjustment

If the running belt is too loose, step off the treadmill, insert a hex wrench into the adjustment hole of the left guard and rotate clockwise 1/4 turn, and then rotate 1/4 lap clockwise on the right foot. Pay particular attention when tightening the belt and ensure both sides are adjusted synchronously, so that the running belt can be tightened and will not deviate from the centre point. If the running belt is too tight, adjust the left and right synchronisation counter clockwise.
Note: The running belt cannot be adjusted too tightly. This will pull the running belt, increase the pressure of the front/rear drum, and damage the drum bearings, resulting is damage to the treadmill. Only adjust the running belt so that it does not slip during operation.
Note: The running belt cannot be adjusted too tightly. This will pull the running belt, increase the pressure of the front / rear drum, the drum bearings and other damage, produce a different tone or other problems, just adjust to the running belt does not slip for the most appropriate.

Running belt alignment

When you use a treadmill, the pressure on the running belt is unbalanced because the force of both feet is not the
same when running, causing the running belt to deviate from the centre. This deviation is normal, and when no one
is running on a running belt, it automatically returns to the centre. If your belt does not do this, you will need to run the belt back to centre.
Run the treadmill without stepping onto it, and increase the speed to 6th gear, observe the distance from the left and right-side bars:

  • If left, use a hex wrench to rotate the left screw clockwise 1/4 turn.
  • If right, use a hex wrench to rotate the right screw clockwise 1/4 turn.
  • If the running belt is still not in the middle, repeat the above action until adjusted to the middle.

After adjusting the belt to the middle, adjust the speed to 6th gear, and observe the deviation of the running belt and the smoothness of the run, if there is a deviation, repeat the adjustment step.
Warning! Do not over tighten the drum! This will result in permanent damage to the bearings!

LUBRICANTS

Treadmills are oiled when they are shipped, but the lubricity of the treadmills is often checked to help keep the treadmills at peak use. The treadmill must be lubricated after one year of use or 100 hours of operation.
After 30 hours or 30 days of use, in the treadmill stationary state, pull the starting belt from the side to reach as far as possible to touch the table surface, if you feel touch the lubricant, do not need to add lubricant;(Use non-petroleum lubricants).

How to add lubricant.
Please adhere to the following instructions carefully.
Open the side bar on the front left of the refuelling decorative cover. Insert the bottle into the opening to measure the size, use a pair of scissors or art knife to cut off tip of the bottle to size. Place the bottle into the hole and squeeze the bottle (as illustrated to refuel). Please ensure the oil bottle tip of the thin rod is inserted correctly and securely into the fuel pipe on the platform and then pour oil into it.

Lubricants

ERRORS AND TROUBLE SHOOTING

The electronic table displays the error message codes

FAULT CODE ISSUE SOLUTION
E1 Communication anomalies: power-on control and electronic table communication abnormal. Possible causes: electronic control and electronic table communication is blocked, check the electronic table to the next section of the control communication line of the connection, to ensure that each core is fully inserted. Check if the electronic table is connected to the controller break, replace the cable.
E2 High voltage fault Check the motor line for damage, odour, replace the motor.
E3 No motor detected Check that the motor line is connected and reconnect the motor line. Check the motor line for damage, odor, replace the motor.
E5 Over current protection: In the operational state, the control continuously detects that the DC motor current is greater than the amount of fixed current, up to 3 seconds Possible reasons: more than the rated load caused by excessive current, system self-preservation, or a part of the treadmill is stuck dead, resulting in the motor cannot turn, the load is too heavy, the current is too large, the system self-insurance; There is also checking the motor for over current or burning odor, replacing the motor, checking the controller for burning air, replacing the controller, or checking that the supply voltage specifications are not high or low, retest using the correct voltage specifications.
E6 Explosion protection: abnormal supply voltage or motor anomalies, etc. lead to drive motor circuitry damage. Possible cause: Check if the supply voltage is below normal. 50%, retest with the correct voltage specifications, check the controller for odour, replace the controller, check that the motor line is connected, and reconnect the motor line.
E07 Safety switch not on. Put the security lock in place.

Common problems and troubleshooting methods

Some or all the buttons are not working well.

  • Uncover the upper case of the electronic watch and test whether the buttons are working.
  • Check or replace the electronic board.
  • Check the button can be worked after the power is turned back on .

The electronic watch has no display.

Troubleshooting methods

  • heck if the input voltage is within the allowable range AC 200-240V.
  • Check if the switch on the electric running machine is turned on.
  • Check if the fuse inside the power outlet is blown. If it is blown, replace it with a spare fuse.
  • Check the controller if LED is lit.
  • Check each cable.
  • Check or replace the electronic board.
  • Check or replace control board.
  • Other problems and troubleshooting

The treadmill does not start.

  • Check if the power plug is plugged in, the power switch is turned on, and the safety switch is removed.

Treadmill slips

  • Adjust the running belt tightly by referring to the instructions

Running belt deviation

  • Refer to the instructions to adjust the running belt to centre

Running abnormal sound.

  • Check if the machine screws are loose and the running belt needs to be lubricated .

EXERCISE GUIDELINES

✓ Consult your doctor before starting an exercise or training program. Please follow the doctor’s advice and instructions for training.
✓ Set your goals with your doctor beforehand, and ensure the plan is realistic and start the training program with ease.
✓ You can add some aerobic exercise to your exercise plan, such as walking, jogging, swimming, dancing or cycling. Always check the pulse. If you do not have an electronic heartbeat monitor, ask your doctor how to measure the pulse by hand or neck. In addition, you must set the target heart rate based on age and physical well-being.
✓ Drink plenty of water during exercise. You must replenish moisture lost from excessive exercise to prevent dehydration. Avoid drinking plenty of ice water or beverages, and the temperature of your drinking water or  beverage is equal to room temperature.

WARM UP EXERCISES

Warm-up and soothing exercise: A successful exercise program must include warm-up, aerobic and soothing exercises. The number of exercises should start with at least two or three times a week, increasing to four or five times a day after a few months. Warm-up is an important part of your fitness routine and should not be skipped. Carrying out warm up exercise before your workout can help prepare your body for more intense exercises as it helps muscles warm, stretch, improve blood circulation, increases pulse, and delivers more oxygen into the muscles. After the aerobic exercise, repeated warm-up exercises can also reduce muscle soreness. We recommend the following warm-up and soothing exercises.

1. 1.Stretch down:

The knees are slightly curved, the body slowly bends forward, let the back and shoulders relax, hands touch the toes as much as possible. Hold for 10-15 seconds and then relax. Repeat 3 times.

Warm Up Exercises

2. The tendon stretches:
Sit on a clean cushion, straighten one leg, and then put the other leg inward so that it fits snugly against the inside of the straight leg and try to touch the toe with your hand. Hold for 10-15 seconds and then relax. Repeat 3 times for each leg.

Warm Up Exercises

3. The calf and heel are stretched:
Hold the wall with both hands or stand with one foot behind, keep the hind legs upright, and the heels touch the ground and tilt toward the wall. Hold for 10-15 seconds and then relax. Repeat 3 times for each leg

Warm Up Exercises

4. Quadriceps stretching:
Grasp the balance with your left hand or the table, then extend your right hand backwards and grab the right heel and slowly pull it toward your hips until you feel the muscles in front of your thighs. Hold for 10- 15 seconds and then relax.

Warm Up Exercises

5. The sartorius muscle (muscle inside the thigh) stretches:
The soles of the feet are opposite, the knees are seated outwards, and both hands grasp the feet and pull toward the groin. Hold for 10-15 seconds and then relax. Repeat 3 times

Warm Up Exercises

Customer Support

Symbol

If you have any questions, please contact our customer care center.
Our contact details are below:

 0044-800-240-4004
 enquiries@mhstar.co.uk

Logo

Documents / Resources

HOMCOM A90-248 Electric Treadmill [pdf] User Manual
A90-248 Electric Treadmill, A90-248, Electric Treadmill, Treadmill

References

Leave a comment

Your email address will not be published. Required fields are marked *