COLBOR W100 Video Light User Manual

COLBOR W100 Video Light

Product Information

Specifications:

• Product Name: W100 Video Light
• Brand: COLBOR
• Waterproof: No
• Power Source: Power Adapter or COLBOR Power Grip
• Controls: Power Button, Wireless Control Setting Button, Brightness Control Wheel, Color Temperature Control Knob
• Features: OLED Screen, Air Inlet, NFC Detection Area, COLBOR Mount Lock, COB Lamp Beads, COLBOR Mount, 1/4 Hole Screw, Battery Contacts, Type-C Port, DC Port

Product Usage Instructions

Caring For Your COLBOR Product:

• Avoid corrosive chemicals, liquids, and heat sources.
• Keep the product away from children and handle with dry hands.
• Do not block ventilation or look directly at the light when in use.
• Do not disassemble or modify the product.
• Disconnect from the power supply when not in use.

Light Installation:

1. Remove the COB protection cover before use.
2. Install the reflector by aligning it with the groove around the lamp head and clipping it in.
3. Connect power either with a power adapter or COLBOR Power Grip using the provided cables.

Operation Instructions:

1. To power on/off, long-press the power button.
2. Short press the wireless control setting button to switch between control modes.

FAQ:

• Q: Can I use a different power adapter with the W100 Video Light?
  A: It is recommended to use the included power adapter to avoid any malfunctions or damage to the light.
• Q: How do I pair the remote control for wireless control?
  A: Short press the wireless control setting button to switch to 2.4GHz or APP control modes. Long-press to start pairing.

Thank you for choosing COLBOR product. Please read this manual carefully before use and follow all instructions mentioned herein.

Caring For Your COLBOR Product

• Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage.
• The product is not waterproof.
• Do not leave the product unattended while in use. Keep out of reach of children.
• Do not handle with wet hands. Do not touch the hot COB surface.
• Please do not block the ventilation and do not look at the light directly when it is on.
• Do not attempt to disassemble or modify the product. Doing so voids warranty.
• Please have the product checked or repaired by authorized technicians if any malfunctions happened.
• Disconnect from the power supply when it is not in use.
• Do not cover, inverted COB and radiator for high temperature, do not cover, inverted, do not touch the lamp holder and radiator vent with your hands when the product in use.
• Do not use any power adapter of other products to avoid the lamp malfunction.
• Malfunction may be caused by dropping, impact of external force.
• Failure to follow all the instructions may result in mechanics damage.
• Our company reserves the right of final interpretation of the product.
• Product design and specifications are subject to change without prior notice.

Note：

• Please use the included power adapter to avoid damage.
• When powering via the COLBOR POWER GRIP, use the D-Tap to DC cable to connect the D-Tap port on the battery and the DC port on the light. Please do not use the Type-C port on the battery for powering.

Product Instructions

1. Power Button
2. Wireless Control Setting Button
3. Brightness Control Wheel
4. Color Temperature Control Knob
5. OLED Screen
6. Air Inlet
7. NFC Detection Area
8. COLBOR Mount Lock
9. COB Lamp Beads
10. COLBOR Mount
11. 1/4” Hole Screw
12. Battery Contacts
13. Type-C Port
14. DC Port

Light Installation

1. Removal of COB protection cover
   Hold the COB cover with the COLBOR Mount tenon and rotate it as the direction of the arrow.
   Note: Be sure to remove cob protective cover and cob protective film before use.
2. Installation and removal of reflector
   • Installation of reflector: Align the reflector with the groove around the lamp head and clip it in, turn the reflector as the direction of the arrow, and the reflector installation will be completed after the top rod rebounds.
   • Removal of reflector: Follow the instructions of “Removal of COB protection cover”.
3. Power Connection
   1. Power with power adapter
      Connect the power adapter, align the DC power jack of the lamp body, and then power on through the cable after stable. Do not suspend the power adapter in the air. Use wire rings to hang it on the lamp stand.
   2. Power with COLBOR Power Grip
      Secure the battery handle with the light body’s 1/4” screw hole at the top and connect via the D-Tap to DC cable for powering.

Operation Instructions

1. Power On/Off
   • Power On: Connect to the power source then long press the power button.
   • Power Off: Long-press the power button to turn off.
2. Wireless Connection
   Short press the remote control button to switch between 2.4GHz (CTRL1 remote) and APP (COLBOR Studio APP) control modes. Long-press the button to start pairing.
3. Brightness Adjustment
   Roll the brightness adjustment wheel for adjustment. Short press the wheel side to select preset brightness(0%, 25%, 50%, 75%, 100%).
4. Color Temperature Adjustment
   Rotate the color temperature control knob for color temperature adjustment. Short press the knob to select preset color temperature(2700K, 3200K, 4300K, 5600K, 6500K).
5. EFF Control/Fan Mode Control
   Connect to the APP for Fan settings and EFF settings.
6. Status Icon Description

Specifications

CRI/TLCI	97/99
SSI	D32:88 D56:71
TM-30-18	Rf:94/Rg:101
Color Temperature Range	2700K-6500K(±150K)
Beam Angle	≈∠ 120°
Illumination	See the Form 1 Below
COB Output Power	90W
Power	100W(Max)
Light Working Voltage	DC 20V⎓5A
Cooling Mode	Smart/Quite/Performance
Connector	DC/Type-C
Body Material	PC+ABS
Light Dimension	157*43*93mm
Light Weight	345g
Operating Temperature	-10~40℃

Packing List

Power adapters may vary according to sales region.

Form 1

Illumination

CCT		1m	3m	5m
2700K	Light Base	2,790	408	221
	Reflector	5,270	665	314
3200K	Light Base	3,010	453	247
	Reflector	5,690	718	339
4300K	Light Base	3,300	499	261
	Reflector	6,360	776	376
4500K	Light Base	3,340	495	264
	Reflector	6,420	790	380
5600K	Light Base	3,450	512	275
	Reflector	6,790	843	398
6500K	Light Base	3,510	519	282
	Reflector	7,02	851	396

The data is given from testing in a laboratory.

WARRANTY

Warranty Period
Thank you for purchasing COLBOR products.

1. Customers are entitled to free replacement or repair service in case of quality defect(s) found in the product under normal use within 30 days upon receipt of the product.
2. Original COLBOR products are entitled to a 12-month limited warranty service. The warranty period begins on the date of purchase of brand-new, unused products by the first end-user. Within the warranty period, if product defect or failure is attributable to material defection or technological problem, the defective product or defective part will be repaired or replaced without charge (service and materials fee).

Warranty Exclusions and Limitations

1. Faults resulted from inappropriate use of a product without following its operation specification
2. Artificial damage, e.g. crash, squeeze, scratch, soaking, exposing to rain or damp
3. Modifications to a product by its user or a third party without prior written consent of COLBOR, e.g. replacement of element or circuit, label alteration
4. The code on product is inconsistent with that of warranty certificate, or the code on the product or warranty certificate is altered or torn off
5. All consumable accessory attached to a product, like cable, cover
6. Faults as a result of force majeure, such as fire, flood, lightning, etc.

Warranty Claim Procedure

1. If failure or any problem occurs to your product after purchase, please contact a local agent for assistance, or you can always contact COLBOR’s customer service through email.
2. Please retain your sales receipt and warranty certificate as proof of purchase. If any of these documents is missing, only sales return or chargeable service will be provided.
3. If the COLBOR product is out of warranty coverage, the service and the cost of the parts will be charged.

Guangzhou Zhiying Technology Co., Ltd
Room 2401, 24 / F, South Tower, Lisheng Plaza, No. 68 Huadi Avenue, Liwan District, Guangzhou, China, 510000
support@colborlight.com
www.colborlight.com

Documents / Resources

COLBOR W100 Video Light [pdf] User Manual W100 Video Light, W100, Video Light, Light

References

• User Manual