JBL E65BTNC Headphones
JBL E65BTNC Headphones

1. What’s in the box

E65BTNC

Headphone E65BTNC

Charging cable

Charging cable

Detachable audio cable with remote

Detachable audio cable with remote

Warranty card, Warning card, Safety sheet, QSG

Cards

2. Overview

a. Buttons & LEDs

JBL E65BTNC Headphones Manual Buttons & LEDs

b. Connections ANC

Connections

 

3. Bluetooth® Connection

  1. Turn on the headphone
    Turn on the headphone
    Note: A 3 seconds interval is necessary between switching the headphones on and off again to avoid false trigger.
  2. If connecting for the first time, the headphone will enter the pairing mode automatically after it is powered on
  3. Connect to bluetooth device
    Connect to bluetooth

 

4. Controlling music

Controlling music

5. Managing phone calls

Managing phone calls

6. Voice Assistant

Voice Assistant

7. Wired listening mode

Wired listening mode

8. Active noise cancelling (ANC)

a. ANC is on as factory default.
b. In wireless listening mode, long press ANC button to switch it off and on.
c. In wired listening mode, power on the headphone and long press ANC button to switch it on; power off the headphone to switch the ANC off.

Active noise cancelling

9. Seamlessly switch between devices
  1. Pair and connect the headphone with the 1st bluetooth device (see Section 3 Bluetooth Connection)
  2. Pair and connect the headphone with the 2nd bluetooth device
    Pair and connect the headphone
  3. Connect to bluetooth device
    Connect to bluetooth
  4. Go back to the bluetooth device list on the 1st device and select the headphone* to connect
    Connect to bluetooth

 

Items to note:

a. Maximum 2 devices can be connected simultaneously

2 devices connected

b. To switch music source, pause the music on the current device and select play on the 2nd device.
c. Phone calls will always take priority.
d. If one device goes out of bluetooth range or powers off, you may need to manually reconnect the other device. See Section 9 Step 3.

10. LED behavior

LED behavior

LED behavior

Specification

  • Driver size: 40mm
  • Dynamic frequency response range: 20Hz-20kHz
  • Sensitivity: 95dB
  • Maximum SPL: 108dB
  • Microphone sensitivity @1kHz dB v/pa: -42
  • Impedance: 32ohm
  • Bluetooth transmitted power: 0-4dbm
  • Bluetooth transmitted modulation: GFSK, π/4DQPSK, 8DPSK
  • Bluetooth frequency: 2.402GHz-2.48GHz
  • Bluetooth profiles: HFP v1.6, HSP v1.2, A2DP v1.2, AVRCP v1.4
  • Bluetooth version: V4.1
  • Battery type: Polymer Li-ion Battery (3.7V, 610mAh)
  • Charging time: 2 hours
  • Talk time with BT on: Up to 24 hours
  • Music play time with BT on and ANC off: Up to 24 hours
  • Music play time with BT on and ANC on: Up to 15 hours
  • Music play time with BT off and ANC on: Up to 30 hours
  • Weight (g): 258g

 

Bluetooth Icon
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective bowners.

JBL E65BTNC Headphones Manual – Optimized PDF
JBL E65BTNC Headphones Manual – Original PDF

References

Leave a comment

Your email address will not be published. Required fields are marked *