Wireless Earbuds, Bluetooth Earbuds, IPX5 Waterproof Wireless Earphones Touch Control
Specifications
- BRAND: Genso
- COLOR: White
- CONNECTIVITY TECHNOLOGY: Wireless
- FORM FACTOR: In Ear
- HEADPHONES JACK: USB,
- PACKAGE DIMENSIONS: 4.37 x 3.78 x 0.79 inches
- ITEM WEIGHT: 1.44 ounces
Introduction
Wireless earbuds can receive ultimate control (Volume Control Available) without touching the phone, thanks to clever touch sensors, and avoid the pain of a physical button (90 percent of Wireless Earbuds: Volume Control Unavailable). Wireless earbuds that are ergonomically designed and redesigned can fit and stay secure in the ear canal even when moving around a lot. To attain higher performance, premium audio quality is required. Wireless earphones with apt-X technology enable powerful, low-bit rate transmission and scalability for lossless audio for free. Nothing is more crucial than having music with you during even the most difficult workout.
On a single charge, the wireless earbuds give up to 5 hours of high-quality sound output, and the supplied charging case provides an additional 4 charges for a total of 25 hours of gameplay. Simply remove the wireless earbuds from the charging case, and they will connect to your phone immediately (after being paired the first time). They are water-resistant to IPX5 standards, making them excellent for tough workouts and runs. Most Bluetooth audio players, including iPhone, Samsung, Huawei, Android devices, PCs, and Macs, are compatible with wireless earbuds.
HOW TO SETUP
- To begin, go to Settings…
- After that, go to Connections.
- Then select Bluetooth…
- Then, in the top-right corner of your screen, tap Scan.
- Then, on your headphones, hit and hold the power button.
- Finally, locate and tap your headphones.
HOW TO SYNC
Remove both earphones from the charging case at the same time and wait for them to switch on and connect to each other for a few seconds. If they don’t immediately pair, put them back in the charging case and repeat the process of extracting them at the same time.
HOW TO PAIR
- Pair the earbuds with your phone. Check the manual that came with the earphones if you don’t know how.
- On your Android or iOS device, turn on Bluetooth.
- Tap Pair after finding your earbuds in the list of available devices.
Frequently Asked Questions
- When my wireless earphones are fully charged, how do I know?
When your earbuds are plugged in and charging, the charging case will blink red. The LED will stop flashing and become solid red once fully charged. - Why is it that only one of my wireless earphones is working?
Depending on your audio settings, headphones may only play in one ear. Check your audio properties to make sure the mono option is disabled. Also, make sure that the voice levels on both earphones are equal. - Why aren’t my earbuds communicating with one another?
Your device’s Bluetooth setting should be turned off. When you take the earbuds out of the case, they will immediately switch on. To manually sync the left and right earbuds, double-press both of them at the same time. NOTE: If something doesn’t work the first time, give it another shot. - How do I get both of my earbuds to function simultaneously?
To sync your earbuds, press the soft touch panel on each one at the same time, then switch on your device’s Bluetooth and select connect (ignoring the mono option) and presto, stereo music! There was an issue, so please accept my apologies. Please come back later and try again. - What’s wrong with one of my wireless earbuds?
It’s possible that one side of your wireless earphones isn’t working because you didn’t set them up correctly the first time. Other reasons include a glitch (which necessitates a manual reset), the necessity to reconnect to your other device via Bluetooth, and hardware damage. - How do you get both earbuds to play the same song at the same time?
Select the ‘Levels’ tab from the drop-down menu. To the right of your device, press the ‘Balance’ button. To the right of your device, press the ‘Balance’ button. Adjust the balance until your speakers sound the same, or restore the balance to make it equal. - Why isn’t my Bluetooth pairing working?
To reset Wi-Fi, mobile, and Bluetooth on an Android phone, navigate to Settings > System > Advanced> Reset Options > Reset Wi-Fi, mobile, and Bluetooth. To unpair, all of your devices on iOS and iPadOS, go to Settings > Bluetooth, tap the info icon, then select Forget This Device for each device, then restart your phone or tablet. - My Bluetooth headphones aren’t connecting to my phone.
If your Bluetooth devices won’t pair, it’s probably because they’re out of range or not in pairing mode. Try rebooting your devices or having your phone or tablet “forget” the connection if you’re encountering persistent Bluetooth connection issues. - On Bluetooth headphones, where is the power button?
It’s the “3” in the center that you’re referring to. It’s fantastic because all of the functions are located on the same side. If you want to connect to your phone, the center button also serves as a “answer and hang-up” button. - Should I carry my earbuds with me at all times just in case?
Yes, except while you’re using them, you should keep them in the case at all times. Now, while they’re in there, they’ll charge unless they’re already full because the only way to avoid them running out of charge before you’re done is to have them full before you start using them.
