Hamilton-Beach-logo

Hamilton Beach 58181 Wave Crusher Blender

Hamilton-Beach-58181-Wave-Crusher-Blender-product

  • For Questions: 1.800.851.8900
  • For recipes, tips, product information, and registration: www.hamiltonbeach.com

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

  1. Read all instructions.
  2. This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are closely supervised and instructed concerning use of the appliance by a person responsible for their safety.
  3. This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
  4. Close supervision is necessary when any appliance is used near children. Children should be supervised to ensure that they do not play with the appliance.
  5. To protect against risk of electrical shock, do not put cord, plug, base, or motor in water or other liquid.
  6. Turn the appliance OFF (Hamilton-Beach-58181-Wave-Crusher-Blender-fig- (1)), then unplug from outlet when not in use, before putting on or taking off parts, and before cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
  7. Avoid any contact with moving parts.
  8. Do not operate any appliance with a damaged supply cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner. Supply cord replacement and repairs must be conducted by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard. Call the provided customer service number for information on examination, repair, or adjustment.
  9. The use of attachments, including canning jars, not recommended or sold by the appliance manufacturer may cause a risk of injury to persons.
  10. Do not use outdoors.
  11. Do not let cord hang over edge of table or counter, or touch hot surfaces, including the stove.
  12. Do not place on or near a hot gas or electric burner or in a heated oven.
  13. Keep hands and utensils out of the jar and away from the cutting blade while blending or chopping food to reduce the risk of severe personal injury and/ or damage to the blender or available attachments (attachments may not be provided with blender). A rubber spatula may be used but must be used only when blender is not running.
  14. Blades are sharp; handle carefully— especially when assembling, disassembling, or cleaning inside blender jar.
  15. Do not use a broken, chipped, or cracked blender jar.
  16. Do not use broken, cracked, or loose cutting blades.
  17. Always operate blender with lid in place.
  18. Ensure cutting blade assembly is tight and secure to jar. Injury can result if moving blades accidentally become exposed.
  19. Check that the appliance is OFF (Hamilton-Beach-58181-Wave-Crusher-Blender-fig- (1)) before plugging cord into wall outlet. To disconnect, turn the control to OFF (Hamilton-Beach-58181-Wave-Crusher-Blender-fig- (1) ); then remove plug from wall outlet. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
  20. Do not use appliance for other than intended purpose.
  21. Do not place blender jar in the freezerfilled with food or liquid.
  22. Electronic push button control (Model 58181): Flashing light indicates ready to operate. Avoid any contact with blades or moveable parts.
  23. Do not blend hot liquids in personal jar.
  24. Be careful if hot liquid is poured into the blender container as it can be ejected out of the appliance due to a sudden steaming.
  25. When blending hot liquids, remove fillercapof two-piece lid or open vent opening of lid with mess-free spout, and close any lid openings along the edge intended for pouring. To prevent possible burns: Do not exceed the 3-cup (710-ml) level. Hot liquids may push off lid during blending; therefore, with the protection of an oven mitt or thick towel, place one hand on top of the lid, keep exposed skin away from the lid, and start blending at lowest speed.
  26. CAUTION! In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
  27. To reduce the risk of injury, never place cutting blade assembly on base without blender jar or personal jar attached.
  28. If the jar should twist or rotate when motor is switched ON (I), switch OFF (Hamilton-Beach-58181-Wave-Crusher-Blender-fig- (1)) immediately and tighten jar in collar or on blender base.
  29. Do not leave blender unattended while it is operating.

SAVE THESE INSTRUCTIONS

Other Consumer Safety Information

This appliance is intended for household use only. Use for food or liquids only.

WARNING Electrical Shock Hazard:

  • This product is provided with a polarized plug (one wide blade) to reduce the risk of electric shock. The plug fits only one way into a polarized outlet. Do not defeat the safety purpose of the plug by modifying the plug in any way or by using an adapter. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, have an electrician replace the outlet.
  • The length of the cord used on this appliance was selected to reduce the hazards of becoming tangled in or tripping over a longer cord. If a longer cord is necessary, an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the rating of the appliance. Care must be taken to arrange the extension cord so that it will not drape over the countertop or tabletop where it can be pulled on by children or accidentally tripped over.
  • To avoid an electrical circuit overload, do not use another high-wattage appliance on the same circuit with this appliance.
  • If the cutting unit blades lock and do not move, it will damage the motor. Do not use. Call the provided customer service number forinformation.

Parts and features

This Use and Care Guide covers a variety of blender models. Seebelow for the parts and features that correspond to your particular model.

Hamilton-Beach-58181-Wave-Crusher-Blender-fig- (2)

  1. Ingredient Measuring Cap (58180 only)
  2. Lid
  3. Blender Jar
  4. Cutting Blade Assembly
  5. Collar (same for all models)
  6. Base
    NOT SHOWN: Cord Storage (back of Base)

CONTROL PANELS

Hamilton-Beach-58181-Wave-Crusher-Blender-fig- (3)

BEFORE FIRST USE: After unpacking Blender, wash everything except Base in hot, soapy water. Rinse and dry. Wipe Base with a soft damp cloth or sponge. Do not immerse Base in water or other liquid. Care should be taken when handling Cutting Blade Assembly as it is very sharp.

How to use

IMPORTANT: Your Blender Jar and Cutting Blade Assembly are subject to wear during normal use. Always inspect Blender Jar for nicks, chips, or cracks. Always inspect Cutting Blade Assembly for broken, cracked, or loose blades. If Blender Jar or Cutting Blade Assembly is damaged, do not use. Call our customer service number to obtain replacement parts.

  1. Make sure Blender is unplugged. Place Base on a clean, dry surface to keep foreign particles from being pulled up into motor during operation.
  2. Place Cutting Blade Assembly, blade side up, through opening in Blender Jar before twisting collar onto bottom of jar. Place Blender Jar on Base.
  3. Add ingredients to Jar. Plug into outlet.
  4. Place Lid onto Blender Jar. Push desired function button. Blender speed increases as buttons are pushed left to right. When using PULSE button, Blender will operate as long as button is pressed. Remaining speed buttons will run Blender until OFF ( Hamilton-Beach-58181-Wave-Crusher-Blender-fig- (1)) is pressed.
    IMPORTANT: Do not operate your Blender continuously for long periods exceeding 3 minutes. If you start to smell a burning odor, stop immediately and remove the Blender Jar. Start and run the Blender— Base ONLY with NO Blender Jar—on the highest speed for 2 minutes. When trying similar recipes in the future, reduce the total amount of ingredients.
  5. Always place one hand on Lid during operation.
    WARNING Burn Hazard. When blending hot liquids, remove filler-cap of two-piece Lid or open vent opening of Lid with messfree spout, and close any Lid openings along the edge intended for pouring. Hot liquids may push Lid off Blender Jar during blending. To prevent possible burns: Do not fill Blender Jar beyond the 3-cup (710-ml) level. With the protection of an oven mitt or thick towel, place one hand on top of Lid. Keep exposed skin away from Lid. Start blending at lowest speed.
  6. ALWAYS turn Blender OFF (Hamilton-Beach-58181-Wave-Crusher-Blender-fig- (1) ) and wait until blades have stopped rotating before removing jar.
  7. To remove Blender Jar after blending is complete, lift Blender Jar straight up.
  8. NEVER replace Blender Jar onto unit while motor is running.

Using Personal Jar

  1. Carefully place Cutting Blade Assembly and Collar onto Personal Jar. Add ingredients to Personal Jar.
  2. Turn Personal Jar upside down, shake to mix ingredients, and place onto Base.
  3. Plug in unit. Hold Personal Jar in place while blending. Press ON (I) and PULSE to blend 15 to 30 seconds or until smooth. Always operate on a countertop or other supporting surface.
  4. Unplug from electrical outlet. Hold Personal Jar and lift straight up to remove.
  5. Turn bottom up; remove Collar and Cutting Blade Assembly from Personal Jar. Hand-tighten Drinking Lid onto Personal Jar.

Blending tips for the 20-oz. (591 ml) Personal Jar

  • If blending action does not start, stops during blending, or ingredients stick to sides of the Personal Jar, turn Blender OFF (Hamilton-Beach-58181-Wave-Crusher-Blender-fig- (1) ). Remove Personal Jar, shake contents, and return to blending.
  • For best performance in the 20-oz. (591 ml) Personal Jar, the minimum amount of liquid needed per recipe is 3/4 cup (6 ounces [177 ml]).
  • When filling the Personal Jar, place frozen ingredients or ice into the Personal Jar first.
  • When turned upside down to blend, the frozen items will be on the top.
  • Do not chop or process hard foods such as cheese, crackers, or meat.
  • Avoid bumping or dropping the Blender.
  • Do not blend hot liquids in Personal Jar.
  • Do not fill Personal Jar above MAX fill line.

Care and cleaning

WARNING Electrical Shock Hazard. To protect against risk of electrical shock, do not put cord, plug, Base, or motor in water or other liquid.

  1. Unplug Blender from electrical outlet.
  2. Wipe Base, Control Panel, and cord with a damp cloth or sponge. To remove stubborn spots, use a mild, nonabrasive cleanser.
  3. Blender Jar, Lid, Cutting Blade Assembly, and Collar are dishwasher-safe. Lid should be placed in the top rack only. DO NOT use the “SANI” setting when washing in the dishwasher. “SANI” cycle temperatures could damage your product. Parts may also be washed with hot, soapy water. Care should be taken when handling the Cutting Blade Assembly as it is very sharp. Rinse and dry thoroughly. Do not soak.
  4. Store Blender with Lid ajar to prevent container odor.

How to use Easy Clean function

  • To Easy Clean, pour 2 cups (473 ml) warm water in jar and add one drop liquid dishwashing detergent. Run the Blender on EASY CLEAN for 10 seconds. Discard soapy water. Rinse with clean water.
  • This function is not a substitute for regular cleaning as instructed in “Care and cleaning.”

Limited Warranty

  • This warranty applies to products purchased and used in the U.S. and Canada. This is the only express warranty for this product and is in lieu of any other warranty or condition. This product is warranted to be free from defects in material and workmanship for a period of five (5) years from the date of original purchase in Canada and three (3) years from the date of original purchase in the U.S. During this period, your exclusive remedy is repair or replacement of this product or any component found to be defective, at our option; however, you are responsible for all costs associated with returning the product to us and our returning a product or component under this warranty to you. If the product or component is no longer available, we will replace with a similar one of equal or greater value.
  • This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions, or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase is required to make a warranty claim. This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as specified on the rating label (e.g., 120 V ~ 60 Hz).
  • We exclude all claims for special, incidental, and consequential damages caused by breach of express or implied warranty. All liability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or condition of merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty. This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply to you.
  • To make a warranty claim, do not return this appliance to the store. Please call 1.800.851.8900 in the U.S. or 1.800.267.2826 in Canada or visit hamiltonbeach.com in the U.S. or hamiltonbeach.ca in Canada. For faster service, locate the model, type, and series numbers on your appliance.

FREQUENTLY ASKED QUESTIONS

What is the brand of the blender, and what is the specific model number?

The blender is from Hamilton Beach, and the model number is 58181.

What color is the Hamilton Beach 58181 Wave Crusher Blender?

The blender comes in a gray color.

What special features does the Hamilton Beach 58181 Blender offer?

The blender provides 6 blending functions with pulse, offering versatility for various blending tasks.

What is the capacity of the glass jar included with the Hamilton Beach 58181 Blender?

The blender comes with a 40 fluid ounces glass jar.

What are the dimensions of the Hamilton Beach 58181 Wave Crusher Blender?

The blender has dimensions of 6 inches in diameter, 6.25 inches in width, and 15.75 inches in height.

What components are included with the Hamilton Beach 58181 Blender?

The blender includes a pour spout for easy serving.

Can you describe the style of the Hamilton Beach 58181 Blender?

The blender is designed as a Blender with a 40 Oz Glass Jar.

What are the recommended uses for the Hamilton Beach 58181 Wave Crusher Blender?

The blender is recommended for blending purposes.

What is the power source for the Hamilton Beach 58181 Blender?

The blender's power source is AC/DC.

How many speeds does the Hamilton Beach 58181 Blender have, and what are they controlled by?

The blender has 3 speeds, and the controls are of the push-button type.

What is the voltage requirement for the Hamilton Beach 58181 Blender?

The blender operates at a voltage of 110 volts.

What is the material of the blades in the Hamilton Beach 58181 Blender?

The blades are made of stainless steel.

Is there any warranty provided with the Hamilton Beach 58181 Wave Crusher Blender?

Yes, the blender comes with a 1-Year Limited Warranty.

What is the weight of the Hamilton Beach 58181 Blender?

The blender weighs 4.29 pounds.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK: Hamilton Beach 58181 Wave Crusher Blender Instruction Manual

REFERENCE: Hamilton Beach 58181 Wave Crusher Blender Instruction Manual-Device.Report

References

Leave a comment

Your email address will not be published. Required fields are marked *