PHILIPS AVENT SCH401 Baby Care Set User Manual

PHILIPS AVENT SCH401 Baby Care Set

Contents hide

5 Nail cutter and scissors

6 Emery boards

7 Pouch

8 Support

9 Documents / Resources

9.1 References

10 Related Posts

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

Nasal aspirator

Warnings:

Never use the nasal aspirator in the child’s mouth or ears.

Never point the tip directly in the center of the nostril.
Always check the device for damage before use. Do not use the device when damaged, this could result in injuries.

Remove the cap of the nasal aspirator.
Squeeze the aspirator bulb and place the tip gently into the child’s nostril and tilt the tip to the side. Be careful not to insert the aspirator into the child’s nose too far.

Release the bulb slowly to let the suction draw mucus out of the child’s nose.
Repeat the process with the other nostril.

Cleaning

Disassemble all parts of the nasal aspirator and wash them in warm water with washing-up liquid.

Clean the nasal aspirator in boiling water for 10 minutes and dry it afterwards.

Finger toothbrush

Place the finger toothbrush on your fingertip to massage the baby’s gums gently.

Cleaning

Clean with a sterilizer or boiling water. Let it cool down and dry.

Brush and comb

Brush/comb the baby’s hair from root to tip.
Tip: Carefully keep a hand on the roots while brushing or combing to avoid pulling the baby’s scalp.

Cleaning

Clean with warm water and some washing up liquid. Rinse them thoroughly and let them dry.

Nail cutter and scissors

Be careful not to cut the nails too close to the baby’s skin.
Tip: We advise you to cut the baby’s nails after a bath when the nails are soft, or when the baby sleeps.

Cleaning

Wipe the nail cutter and the scissors with a damp cloth and dry them.

Note: You can sterilize the nail cutter and the scissors by wiping their cutting edges with alcohol.