Federal Signal® FSEX-HI
Hearing Impaired Explosion Proof Strobe Light
Features
- Approved for mounting in any matter including dome up
- Synchronize with SSM module
- Current limited
- 10,000 hour strobe tube
- 3/4″ NPT pendant, ceiling and wall mount options available
- Dome guard optional
- Type 4X, IP66, IPK69 enclosure
- UL Listed for Class I, Division 1, Groups C and D; Class II, Division 1, Groups E, F and G; Class I, Division 2, Groups A, B; and Class III
- Marine rated
Description
The Federal Signal Model FSeX-HI explosion-proof strobe light produces 80 high-intensity flashes per minute. This warning light operates on 24VDC and is unique to the market because it covers an entire range of possible mounting configurations including dome up. This light is designed for use in alarm notification systems and is compatible with fire alarm and suppression supervised control panels and power boosters.
The 24VDC FSEX-HI features a voltage in-rush limiting PCB design that provides greater compatibility with factory automation control systems and less electrical interference with in-rush sensitive devices.
The Model FSEX-HI is specifically designed for explosionproof atmospheres and/or corrosive environments. Because it is easy to install and requires very low maintenance, it is ideal for use in areas such as oil rigs, mines, refineries, and chemical plants
Technical Specifications
| Operating Voltage | 24 VDC polarized |
| Operating Current | 1.90 amps (3.0 amps in-rush) |
| Flash Rate Per Minute | 80 |
| Candela peak* | 2,000,000 |
| Lamp Life | 10,000 hours |
| Light Source | Strobe tube |
| Material | Cast Aluminum |
| Operating Temperature Range | -31°F to 150°F |
| Weight | Without mounting: 13.9 lbs Ceiling mount: 4.5 lbs Pendant mount: 2.0 lbs Wall mount: 5.9 lbs |
*Note: Peak candela is the maximum light intensity generated by a flashing light during its light pulse.
Standard Strobe Model
- Cast Aluminum Corrosion-Resistant Explosion-Proof Housing
- High Intensity Strobe Tube
- Glass Dome
Ceiling Mount
- 4X 0.31 ” 8mm
- 6.03 “/ø153mm Min. bolt circle
Pendant Mount
- 3/4″ NPT
Wall Mount Bracket
- 0.38 “/10 mm
- 4X 3/4″ NPT
- 1-1/4″ NPT
- 2X ø0.27 [ø7]
- 4.63 “/ 117 mm Min. bolt circle
Ordering Information
| Part Number | Ordering Part Number | Description |
| FSEX-CPGHI-2 | 1430502 | Explosion-Proof Strobe, 16-33 VDC, 1.9A, Red Housing, Clear Lens |
| DGXC-SB | 1430508 | Dome Guard |
| CMXC-R-SB | 1400506 | Ceiling Mount |
| WMXC-4R-SB | 1420503 | 90 Degree Wall Mount |
| LITESFX01A | Call for part number | Strobe Tube (Series A2, B1) |
| SSM | 1430509 | Sync Module, 2 Strobes per circuit |
| PMXC-R-SB | 1430507 | Pendant Mount |
WARNING
- Installation must be performed by qualified personnel and in accordance with all national and local codes and ordinances.
- Shock hazard. Disconnect power source before servicing. Serious injury or death could result.
- Read all instructions carefully and understand them before starting installation. Save instructions for future use. Failure to read and understand instructions could result in improper operation of device resulting in serious injury or death.
|
Hazardous Locations |
||||
|
Class |
Group | Division | 40°C | 65°C |
| I | A, B | 2 | T2B |
T2A |
|
I |
C, D | 1 & 2 | T6 | T4A |
| II | E, F, G | 1 & 2 | T6 |
T4A |
|
III |
1 & 2 | T6 |
T4A |
|
potter electric Signal Company, LLC · St. Louis, MO · phone: 800-325-3936 · www.pottersignal.com
8820057-Rev A
Documents / Resources
 |
POTTER FSEX-HI Hearing Impaired Explosion Proof Strobe Light [pdf] Owner's Manual FSEX-HI Hearing Impaired Explosion Proof Strobe Light, FSEX-HI, Hearing Impaired Explosion Proof Strobe Light, Explosion Proof Strobe Light, Proof Strobe Light |
