MANOVELLA LOGODESIGNER SERIES DOOR HANDLE INSTALLATION
INSTRUCTIONS (PASSAGE & PRIVACY)

Designer Series Passage and Privacy Set

  1. Drill holes according to the product template, including checking the latch face into the door so that it sits flush. MANOVELLA Designer Series Passage and Privacy Set - DOOR HANDLE 1
  2. Insert latch and fix in with screws.MANOVELLA Designer Series Passage and Privacy Set - DOOR HANDLE 2
  3. Insert spindle through latch.
    (Note – If installing privacy set you must use the “split spindle” that is supplied with the privacy latch. Do not use the solid spindle.)MANOVELLA Designer Series Passage and Privacy Set - DOOR HANDLE 3
  4. Insert O-ring over spindle, and using a small screw driver push this O-ring inside the hole so it falls within the grooves in the spindle.MANOVELLA Designer Series Passage and Privacy Set - DOOR HANDLE 4
  5. Insert the 2 x small screws into the diagonal fixing holes of the external handle rose so they line up with your fixing holes drilled through your door.MANOVELLA Designer Series Passage and Privacy Set - DOOR HANDLE 5
  6. Tighten the fixing sleeves to the small screws that you have just inserted through the external handle.MANOVELLA Designer Series Passage and Privacy Set - DOOR HANDLE 6Please note if installing the Rosedale design, the rose is unable to be removed entirely due to the size of the knurled lever. We suggest moving the rose to the side and using a hand-held screwdriver to tighten fixing screws.
  7. Push external handle with sleeves attached on to the spindle that is currently sitting in the latch.MANOVELLA Designer Series Passage and Privacy Set - DOOR HANDLE 7
  8. Push internal handle over the spindle that is currently sitting in the latch.MANOVELLA Designer Series Passage and Privacy Set - DOOR HANDLE 8
  9. Insert the 2 x long screws through the internal handle rose in to the fixing sleeves.MANOVELLA Designer Series Passage and Privacy Set - DOOR HANDLE 9
  10. Tighten the long fixing screws using a hand screwdriver. Be careful not to over tighten.MANOVELLA Designer Series Passage and Privacy Set - DOOR HANDLE 10
  11. Slip rose cover plate over both internal and external handles ensuring the privacy pin hole is sitting horizontally on the latch side, and push on until sitting flush against the door.MANOVELLA Designer Series Passage and Privacy Set - DOOR HANDLE 11
  12. Fix privacy pin through hole in internal rose and tighten using your fingers.MANOVELLA Designer Series Passage and Privacy Set - DOOR HANDLE 12
  13. Check in your strike plate on your door frame so that when the door is closed the latch fully inserts in to strike hole.
  14. Installation of your new door handle is now complete. Test both handles and privacy pin to make sure everything is operating correctly.

Documents / Resources

MANOVELLA Designer Series Passage and Privacy Set [pdf] Installation Guide
Designer Series, Designer Series Passage and Privacy Set, Passage and Privacy Set, Privacy Set, Set

References

Leave a comment

Your email address will not be published. Required fields are marked *