Eonon-logo

Eonon Q03Pro Car Waterproof and Night Vision Camera

Eonon-Q03Pro-Car-WaterProof-And-Night-Vision-Camera-product

PartsEonon-Q03Pro-Car-WaterProof-And-Night-Vision-Camera-fig (1)

Product Overview

  • This is a safety assistant device specially designed and produced for automotive products. The product provides safety solutions in car reversing process. Since the driver has a blind spot in back end when the car reverses. The device is used to predict and avoid the obstacles and dangers in advance, ensuring the safety in the reversing process. Detacure of des vehicles to install, do not need to change the original
  • With functions of HD, night vision, large horizontal viewing angle;
  • With characteristics of waterproof, dust proof, shock, and interference;
  • Integrating the differences of car models and structures provides a variety of optional lens solutions.

Installation Steps

Locate the mounting position of the lens

(Please refer to the following diagram cases for the two typical installation methods)

a. Bracket mounting method

Eonon-Q03Pro-Car-WaterProof-And-Night-Vision-Camera-fig (2)

NOTE: Do not install the lens in the position where may cover the license plate.

b. Drilling methodEonon-Q03Pro-Car-WaterProof-And-Night-Vision-Camera-fig (3)

Note: Please confirm if the installation location is convenient for lens wiring before drilling.

Lens wire connection

Overall wiring diagramEonon-Q03Pro-Car-WaterProof-And-Night-Vision-Camera-fig (4)

Note: The diagram is a reference of the basic type; the real device may have some differences in details.

RCA line traces (connect to a DVD host computer or monitor)

  • A Host computer RCA line connection: yellow RCA line connected to the host reverse input interface, red wires connect to the reverse trigger line.
  • Camera power line connection: red wires connect to reverse lights +12 V, black wires connect to ground wire.

Eonon-Q03Pro-Car-WaterProof-And-Night-Vision-Camera-fig (5)

Lens power supply connection

  • Step 1: Find the positive-and negative reverse circuit (Suggestion: connect to the positive and negative poles of the reverse lights)
  • Step 2: Connect the lens positive and negative poles correspondingly to reverse positive and negative polesEonon-Q03Pro-Car-WaterProof-And-Night-Vision-Camera-fig (6)

Check and verifications

Check the displayed image after installation.

  • a. Confirm if the screen image can display the vehicle’s rear view completely. Please re-adjust the lens angle if the screen was covered, as the picture shown below.
  • b.Display problem or other problems, please refer to Point 6 of FAQEonon-Q03Pro-Car-WaterProof-And-Night-Vision-Camera-fig (7)

Operation Steps

  • Start the car
  • Link to reverse gear, the monitor displays vehicle’s rear view immediately.Eonon-Q03Pro-Car-WaterProof-And-Night-Vision-Camera-fig (8)

Notes for Installation and Use

  • Notes for Installation and Use
  • This product is a specialized vehicle lens; any usage on other occasions is prohibited.
  • This product is specially designed for vehicle reversing assistants; its hardware specifications and features are all designed for car application.Long time uninterrupted power-on use will reduce the life of the product, and will cause the risks of short circuit and fire; In the case of power-on test, the proposed continuous power-on time should not exceed 10 minutes;
  • Avoid short circuits in the wiring process when installing the product. The short circuit will blow out the auto-fuse and damage the electrical appliances;
  • Please pay attention to safety in drilling and installation occasions, check and avoid damaging other parts of the vehicle;
  • Please try to install the device within the lateral width of the license plate, mounting the lens on a relatively central position.
    Notes for Use
  • Please read the Product Safety Precautions of the device before installing and using.
  • Please do not completely rely on the rear-view system; it can only be regarded as an assistant tool of reverse.
  • Please do not use high-pressure water to wash the vehicle or directly inject the water towards the lens, avoiding the water gets into the lens or the lens fall on the ground.
  • Please check the lens base regularly before driving. Check if the lens mounting screws loosed or dropped, avoiding the potential accidents cased by lens dropping –
  • This device can be installed and connected to displays with an RCA signal input line

FAQEonon-Q03Pro-Car-WaterProof-And-Night-Vision-Camera-fig (9)

 

Documents / Resources

Eonon Q03Pro Car WaterProof And Night Vision Camera [pdf] User Manual
Q03Pro Car WaterProof And Night Vision Camera, Q03Pro, Car WaterProof And Night Vision Camera, WaterProof And Night Vision Camera, Night Vision Camera, Vision Camera, Camera

References

Leave a comment

Your email address will not be published. Required fields are marked *