Oregon-Scientific-logo

Oregon Scientific RM338P Proji Projection Clock User Manual

Oregon-Scientific-RM338P-Proji-Projection-Clock-product

INTRODUCTION

Thank you for purchasing the Oregon Scientific ™ PROJI Projection Clock (model: RM338P/RM338PU). This device bundles precise timekeeping, alarm and temperature monitoring features into a single tool you can use from the convenience of your home. Keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specifications and warnings: you should know.

PACKAGE CONTENTS

Oregon-Scientific-RM338P-Proji-Projection-Clock-fig- (1)

OVERVIEW

TOP VIEW

Oregon-Scientific-RM338P-Proji-Projection-Clock-fig- (2)

  1. Oregon-Scientific-RM338P-Proji-Projection-Clock-fig- (3)Press to increase settings, or press and hold to increase rapidly in setting mode.
  2. SNOOZE LIGHT – Press to snooze an alarm or activate the backlight and projection. Press and hold until you hear a beep to activate the projection for 5 minutes.
  3. Oregon-Scientific-RM338P-Proji-Projection-Clock-fig- (3)Press to toggle between current time, calendar or alarm 1/2 displays for 5 seconds. Press and hold to enter setting mode.
  4. Oregon-Scientific-RM338P-Proji-Projection-Clock-fig- (5)Press to decrease settings, and press and hold to decrease settings rapidly. Projection lens
  5. Oregon-Scientific-RM338P-Proji-Projection-Clock-fig- (6) Press to turn on/off alarms, and press and hold to enter alarm setting mode.

REARVIEW

Oregon-Scientific-RM338P-Proji-Projection-Clock-fig- (7)

  1. Battery compartment
  2. RESET – Press to reset the unit to default.
  3. PROJECTION – Press to flip the projection content at 180°.
  4. Press and hold to toggle continuous projection on/off.
  5. RCC – Press to turn on and search RCC signal. Press and hold to turn it off.
  6. Battery compartment cover

LCD SCREEN

Oregon-Scientific-RM338P-Proji-Projection-Clock-fig- (8)

  1. Time display
  2. Weekday display
  3. Indoor temperature displayOregon-Scientific-RM338P-Proji-Projection-Clock-fig- (9)

GETTING STARTED INSERT BATTERIES

  1. Gently push the battery compartment cover downwards to remove it from the main unit.
  2. Insert the batteries, matching the polarities (+/-).
    NOTE: Replace the batteries when on display Oregon-Scientific-RM338P-Proji-Projection-Clock-fig- (10) or when the display is dim.

DC POWER

Oregon-Scientific-RM338P-Proji-Projection-Clock-fig- (11)Plug the power cable into the power jack and plug the power adapter into a suitable power outlet
NOTE: It is recommended to insert the battery as a backup power source.

CLOCK RECEPTION
This clock synchronizes automatically with a clock signal. Press RCC to turn on and search for the clock signal. The main unit can receive RF clock data from different.

RCC signal

Model number Region signal
RM338P EU DCF
RM338PU UK MSF

Clock signal reception indicator

Oregon-Scientific-RM338P-Proji-Projection-Clock-fig- (12)

NOTE:
It takes 2-10 minutes to receive the clock signal. If the signal is weak, it could take up to 24 hours to receive a valid signal.

SET THE CLOCK MANUALLY

  1. Press and holdOregon-Scientific-RM338P-Proji-Projection-Clock-fig- (3). The screen displays ZONE and the number flashes.
  2. Press once or press and hold +/- to adjust the setting. For the EU/UK, the time-zone offset sets the clock up to 23 hours from the received clock signal time.
  3. PressOregon-Scientific-RM338P-Proji-Projection-Clock-fig- (3) to confirm.
  4. Press Oregon-Scientific-RM338P-Proji-Projection-Clock-fig- (3)once or press and hold +/- to adjust the setting for 12/24h hour format, hour, minute, year, calendar format (month-day/day-month), month, date, temperature unit (°C/°F) and language.
  5. PressOregon-Scientific-RM338P-Proji-Projection-Clock-fig- (3) to confirm each setting.

NOTE

  • The language options are English (ENG), Spanish (SPA), Italian (ITA), French (FRE) and German (GER).
  • The signal reception is on after each reset or battery replacement.
  • While in the setting mode, press and hold to save the settings and leave the setting mode.

ALARM SETTING/ADJUSTING ALARM TIME

  1. Press and hold Oregon-Scientific-RM338P-Proji-Projection-Clock-fig- (6)
  2. Press once or press and hold +/- to adjust the hour and minute settings, then press Oregon-Scientific-RM338P-Proji-Projection-Clock-fig- (6)to confirm.
  3. Press Oregon-Scientific-RM338P-Proji-Projection-Clock-fig- (6)+/- to toggle the weekday alarm ON/OFF, then press to confirm.
  4. The alarm rings only on weekdays when the setting is ON.
  5. Repeat steps 2 – 4 for alarm 2 setting.

TURN ON/OFF ALARMS
Press to turn on/off the alarm in sequence: AlarmOregon-Scientific-RM338P-Proji-Projection-Clock-fig- (13) Alarm Oregon-Scientific-RM338P-Proji-Projection-Clock-fig- (15) Both Oregon-Scientific-RM338P-Proji-Projection-Clock-fig- (16)ON Both OFF.

OPERATION
When the alarm rings, the backlight will flash. You may:

  • Press Oregon-Scientific-RM338P-Proji-Projection-Clock-fig- (6)to stop. The alarm will ring again on the next day.
  • Press SNOOZE | LIGHT to snooze. The alarm rings again after 8 minutes.

PROJECTION

Oregon-Scientific-RM338P-Proji-Projection-Clock-fig- (17)

The projector displays the time on your ceiling for easy viewing in a darkened room. For optimal projection results, place the unit within 1.5 – 2 m (5 – 6.5 ft) from the ceiling or wall.

  • Press SNOOZE | LIGHT to activate the backlight and projection for 5 seconds.
  • Press and hold SNOOZE | LIGHT until you hear a beep to activate the projection for 5 minutes.
  • Press PROJECTION to flip the projection content by 180°.
  • Press and hold PROJECTION to toggle the continuous projection on/off.
  • NOTE The continuous projection function is disabled when the main unit is not connected to the power adapter.

PRECAUTIONS

  • Do not subject the unit to excessive force, shock, dust, temperature or humidity.
  • Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth.
  • Do not clean the unit with abrasive or corrosive materials.
  • Do not tamper with the unit’s internal components. This invalidates the warranty.
  • Only use fresh batteries. Do not mix new and old batteries.
  • Images shown in this manual may differ from the actual display.
  • When disposing of this product, ensure it is collected separately for special treatment.
  • Placement of this product on certain types of wood may result in damage to its finish for which Oregon Scientific will not be responsible. Consult the furniture manufacturer’s care instructions for information.
  • The contents of this manual may not be reproduced without the permission of the manufacturer.
  • Do not dispose of old batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.
  • Please note that some units are equipped with a battery safety strip. Remove the strip from the battery compartment before first use.
  • NOTE The technical specifications for this product and the contents of the user manual are subject to change without notice.

SPECIFICATIONS MAIN UNIT

L x W x H 108 x 26 x 77 mm

(4.25 x 1.02 x 3.03 in)

Weight 112 g
Temperature range -5°C to 50°C (23°F to 122°F)
Accuracy 0°C-40°C: ±1°C (± 2.0°F)

40°C <T<0°C: ±2°C (± 4.0°F)

Resolution 0.1°C (0.2°F)
Power 2 x UM-4 (AAA) 1.5 V batteries

3.6 V adapter

SPECIFICATIONS

Visit our website www.oregonscientific.com to learn more about Oregon Scientific products. For any enquiry, please contact our Customer Services at info@oregonscientific.com. Oregon Scientific Global Distribution Limited reserves the
right to interpret and construe any contents, terms and provisions in this user manual and to amend it, at its sole discretion, at any time without prior notice. To the extent that there is any inconsistency between the English version and
any other language versions, the English version shall prevail.

EU-DECLARATION OF CONFORMITY
Hereby, Oregon Scientific, declares that this PROJI Projection Clock (model: RM338P/RM338PU) complies with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the signed and dated Declaration of Conformity is available on request via our Oreaon Scientific Customer Service. Countries RTTE Approval Complied All EU countries, Switzerland CH and Norway

Download PDF: Oregon Scientific RM338P Proji Projection Clock User Manual

References

Leave a comment

Your email address will not be published. Required fields are marked *