CR Handrail CHR2X48 Black Deck Railing Wrought Iron Handrail Post Kit

BON PERGOLA 0621 Freestanding Weatherproof Pergola

You made the right choice of railing!

  • Cost-Effective
    Symbol
  • Safe & Durable
    Symbol
  • Quick to Install
    Symbol
  • Easily Extendable (Modular)
    Symbol

Symbol Time Required

Ground attachment

wood – 20+ minutes
concrete – 60+ minute

Symbol Tools Required

An electric drill/hammer

An impact drill is preferred (although not required) for installing the concrete bolts for concrete steps, lag screws for wooden steps, or other ground attachments.

Means and Methods Disclaimer

In no event shall CR Handrail have any responsibility, control over, charge of, responsibility, or liability for the means, methods, techniques, sequences, or procedures, or for safety precautions in connection with the installation of the railing, since these are solely CM/GC’s, Subcontractor’s, and Owner’s responsibilities.

Each installation site differs widely ranging from the construction & condition of attachment points, local building & safety code, local construction code, and local means & methods.

CR Handrail’s installation guide (whether it be in text, illustration, video or in support discussion) constitute for ideal installation condition. There is no ideal installation in real life. There is no substitution for consulting a local licensed contractor, architect, engineer, nor code inspector.

CR Handrail’s installation hardware and tools are provided as building material and does NOT constitute as the specific nor final installation hardware. Once again, you and your installer must make the final on-site determination to the specific means and methods of installation appropriate for your installation

Following CR Handrail’s instruction does NOT constitute as proper installation as you and your installer must make the final means & method determination. Improper installation can lead to failure of rail system which can cause serious injury.

Please make sure the hardware and tools we provided will be right for your install (READ means & methods disclaimer). IT IS POSSIBLE YOU NEED DIFFERENT HARDWARE & METHODS. Please take your time to do your installation. If you are unsure or uncomfortable with the installation, we highly recommend hiring a licensed and bonded contractor.

Means and Methods Disclaimer

We’ve made it easy for you to install your post!

Installation

Scan this QR code for a detailed video explanation of how to install your new handrail correctly.

QR code

Masonry Tools & Hardware Explained

  • 5/16 (8mm) Anchor Bolt
    Masonry Tools & Hardware Explained
  • 5/16 (8mm) Masonry Drill Bit
    Masonry Drill Bit
    *SDS+ available upon request
    FOR CONCRETE
  • Diamond Core Drill Bit
    Drill Bit
    For hard stone
    *available upon request

Note: This will be a tight fit. In fact, the specification calls for the drill bit and anchors to be the same size. Some installers use a 3⁄8 drill bit to make the installation easier, and other installers wiggle the drill bit to bore the top of the hole slightly bigger. (We are aware of the tight fit and we must only recommend using our masonry drill bit without wiggling).

WARNING

The strength of the anchor is dependent on the hole size & concrete integrity. A hole that’s too big or concrete that’s not up to standard grade can make the anchor wiggle or possibly come out. This is what can cause a rail to fail & fall over

Position and Mark the Holes

Post should be at least 1.5” (3.8cm) away from edges.

Ensure the post baseplate is parallel with edges.

Position and Mark the Holes

FOR CONCRETE

Please adhere to local & statewide building code. Recommended distance from the edge is based on standard grade concrete (2500 psi).

If your concrete is ‘high strength’ concrete, the edge distance can be reduced. (See ICC Chapter 19, Table 1908.2)

Smaller drill bit (Please go straight to Step 5)

Position and Mark the Holes

Larger drill bit (Continue to Step 3)

Position and Mark the Holes

Ensure Correct Depth

Use the CR Handrail pencil to measure the depth of the hole with the flat end of the pencil.

Note: This is only for rough measurements. This is to endure the hole is deep enough.

FOR CONCRETE

For Wood, please go straight to Step 5.

Tip: holes must be deep enough or will have a serious issue

Ensure Correct Depth

Install Anchors

Once the holes are made and depth verified, hammer the anchors into the holes. 

Washer Tip: Hammer the anchor with 2 washers and 2 nuts (with nut at the very tip) to prevent over insertion.

Install Anchors

Periodically Double Check!

Put the post onto the anchor and physically verify the washer and nut has only enough thread to for the full height of the nut to screw on.

Install Anchors

Secure Post to Ground

Use the nut socket & bit extension

Secure Post to Ground
Secure Post to Ground

What if Post Not Level?

If ground is not level, use included extra washers to shim the baseplate.

What if Post Not Level?

FOR WOOD

  1. Position the posts (along with the complete railing) over predrill holes.
  2. Install a washer & lag screw, one by-one
  3. When all are installed, doublecheck each of them again, to ensure all are tightened.
    Note: If your drill has a hammer (or impact function), enable it.
    For Wood

FOR CONCRETE

  1. With all the nuts & washers removed, put the posts onto the anchor bolts (along with the rest of the rail). Install a washer & lag screw, one-by-one
  2. Hand-tighten a washer and nut over each anchor bolt.
  3. Use the electric drill to tighten the nut (turn off hammer or impact driver function).
    For Concrete

More from CR HANDRAIL

More from CR HANDRAIL

CR Handrail’s Brackets and Covers

CR Handrail’s Brackets and Covers

CR Handrail’s Top Connectors for Top Rail & Post

CR Handrail’s Top Connectors for Top Rail & Post
CR Handrail’s Top Connectors for Top Rail & Post

Warranty

5 Years’ Free Warranty

  1. Scan the barcode within 30 days.
  2. Register your product.
    Or, register your product at www.crhandrail.com/5yearwarranty
    QR Code

Need help?

  • Connect Multiple Railings
  • Technical Drawings
  • Complicated Installations
  • Installation Error
  • Missing Parts
    CONTACT US
    (Info Last Page)
    BON PERGOLA 0621 Freestanding Weatherproof Pergola

Chi & Richard with family at San Diego Safari Park

A heartfelt message from the owners of CR Handrail

Chi is an architect and Richard is in real estate construction. With the combined knowledge and expertise, Chi & Richard believe they can provide the best commercial grade railing product that can be installed by anyone. They want to take the time to say thank you. If you got the time, Chi, Richard & the CRH team love to see a photo or video of your installation!
– Chi & Richard from CR Handrail

Person

Your picture and video post helps those who are worried about the installation.

Picture

Symbol Susanna P

Stars I was worried

Reviewed in Canada on October 12, 2022

Size: 4 Steps | Verified Purchase

I was a little worried that the handrail would be difficult to install. It comes with everything you could possibly need to install the railing. Hats off to the people who put the kit together.

2 people found this useful

Help Us Make a Difference:

SAFETY FOR ALL!

How can we make it easier for you? 

Missing Parts?
www.crhandrail.com/parts

QR Code

Support

Text with Photos
(800) 420-0432

QR Code
SMSTO:18004200432:Hi CRHandrail.

WhatsApp
(775) 324-8877

QR Code

Need help? Text us the picture of your problem.

Need Help

Logo

Documents / Resources

CR Handrail CHR2X48 Black Deck Railing Wrought Iron Handrail Post Kit [pdf] User Guide
CHR2X48 Black Deck Railing Wrought Iron Handrail Post Kit, CHR2X48, Black Deck Railing Wrought Iron Handrail Post Kit, Wrought Iron Handrail Post Kit, Handrail Post Kit, Post Kit

References

Leave a comment

Your email address will not be published. Required fields are marked *