BCS-AMERICA-logo

BCS AMERICA BIO-100 Chipper

BCS-AMERICA-BIO-100-Chipper-product

 

The BCS AMERICA Chipper/Shredder is a versatile machine designed for efficiently chipping and shredding various types of organic material. This product is ideal for homeowners and professional gardeners looking to recycle yard waste and create mulch for their gardens.

Product Features

  • Powerful motor for efficient chipping and shredding
  • Durable construction for long-lasting use
  • Large hopper for easy loading of materials
  • Adjustable cutting blades for different sizes of materials
  • Easy-to-use controls for safe operation

Product Usage Instructions

Before using the BCS AMERICA Chipper/Shredder, please read and understand the following instructions:

  1. Ensure that the chipper/shredder is placed on a stable and level surface.
  2. Inspect the machine for any damage or loose parts. Do not use the chipper/shredder if any defects are found.
  3. Refer to the user manual or watch the tutorial video for step-by-step assembly instructions.
  4. Connect the chipper/shredder to a power source using the provided power cord.
  5. Make sure the power switch is in the “Off” position before plugging in the machine.
  6. Wear appropriate safety gear, including safety goggles, gloves, and ear protection.
  7. Gather the materials you wish to chip or shred, ensuring they are free from any foreign objects.
  8. Open the hopper and carefully load the materials into the chipper/shredder. Do not overload the machine.
  9. Close the hopper securely before starting the machine.
  10. Turn on the chipper/shredder by flipping the power switch to the “On” position.
  11. Feed the materials into the chipper/shredder gradually, allowing the blades to process them efficiently.
  12. Monitor the machine during operation and avoid reaching into the hopper while it is running.
  13. After use, turn off the chipper/shredder by switching the power switch to the “Off” position.
  14. Disconnect the power cord from the power source.
  15. Clean the chipper/shredder thoroughly, removing any debris or residue.
  16. Store the chipper/shredder in a dry and secure location.

For more detailed instructions and visual guidance, please visit our website at www.bcsamerica.com/pages/how-to-videos or scan the QR code provided in the user manual.

Assembly Instructions & Information

Chipper/Shredder Assembly Instructions & Information
For a more detailed video tutorial of this process, head to www.bcsamerica.com/pages/how-to-videos or scan the QR code below.

BCS-AMERICA-BIO-100-Chipper-fig-1BCS-AMERICA-BIO-100-Chipper-fig-2

  • IMPORTANT: Remember to lay out all the nuts and bolts and match them up with the holes that need to be bolted together.
  • Fasten the top cover/shredder hopper and the chipper hopper at the same time, bolting on the brace between the chipper hopper and the top cover.
  • Tighten all the hardware for both hoppers at roughly the same time and note that the M8 bolts that hold on the top cover/shredder hopper are all the same with the exception of two longer ones that fasten the brace for the chipper chute onto the top cover.
  • Install the front axle next. The axle can be put on upside down so make sure that the U-shaped edge of the axle cups around the front edge of the body of the chipper. It is held on by four fasteners, with two being large studs protruding horizontally through the body of the unit and going through two spacers, fastened by two washers and nuts. See photo:BCS-AMERICA-BIO-100-Chipper-fig-3
  • After the front axle is on tip the unit forward and install the two large blue mounting brackets onto the body of the unit. Next put the two belts on the driven, (small) pulley set and thread them onto the drive (large) pulley set. Now snug the four large cap screws that fasten the the pulley set to the two large brackets and pry down on the pulley set to tighten up the bolts.

See photo

BCS-AMERICA-BIO-100-Chipper-fig-4

  • Install the two round metal legs into the tubes on the Pulley housing and lock them in place with the two set screws. Tip the unit rearward and install the two casters on the front axle and level out the unit by adjusting the spacers on the casters and sliding the legs either up or down in the tubes on the rear of the unit.
  • Make sure to attach the panic/shut down rope on the unit.
  • For a more detailed video tutorial of this process, head to www.bcsamerica.com/pages/how-to-videos or scan the QR code below.BCS-AMERICA-BIO-100-Chipper-fig-6

 

Documents / Resources

BCS AMERICA BIO-100 Chipper [pdf] Installation Guide
BIO-100, BIO-100 Chipper, Chipper

References

Leave a comment

Your email address will not be published. Required fields are marked *