FORTIN-LOGO

FORTIN EVO ONE Remote Start Shark Electronics

FORTIN-EVO-ONE-Remote-Start-Shark-Electronics-PRODUCT

REGULAR INSTALLATION

ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES

FORTIN-EVO-ONE-Remote-Start-Shark-Electronics-FIG-1FORTIN-EVO-ONE-Remote-Start-Shark-Electronics-FIG-2

MANDATORY INSTALL

FORTIN-EVO-ONE-Remote-Start-Shark-Electronics-FIG-3

This guide may change without notice. See www.fortin.ca for latest version.

THE REMOTE START WILL NOT OPERATE IF

FORTIN-EVO-ONE-Remote-Start-Shark-Electronics-FIG-4

CAUTION

FORTIN-EVO-ONE-Remote-Start-Shark-Electronics-FIG-5

This guide may change without notice. See www.fortin.ca for latest version

DESCRIPTION

FORTIN-EVO-ONE-Remote-Start-Shark-Electronics-FIG-6

AUTOMATIC TRANSMISSION WIRING CONNECTION

FORTIN-EVO-ONE-Remote-Start-Shark-Electronics-FIG-7 FORTIN-EVO-ONE-Remote-Start-Shark-Electronics-FIG-8

DCRYPTOR PROGRAMMING PROCEDURE

This guide may change without notice. See www.fortin.ca for latest version.

FORTIN-EVO-ONE-Remote-Start-Shark-Electronics-FIG-9 FORTIN-EVO-ONE-Remote-Start-Shark-Electronics-FIG-10

KEY BYPASS PROGRAMMING PROCEDURE

FORTIN-EVO-ONE-Remote-Start-Shark-Electronics-FIG-11 FORTIN-EVO-ONE-Remote-Start-Shark-Electronics-FIG-12

REMOTE STARTER PROGRAMMING PROCEDURE

FORTIN-EVO-ONE-Remote-Start-Shark-Electronics-FIG-13

REMOTE STARTER FUNCTIONALITY

FORTIN-EVO-ONE-Remote-Start-Shark-Electronics-FIG-14

Notice: Updated Firmware and Installation Guides Updated fi rmware and installation guides are posted on our website on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer-safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly, or in any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by a qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT
Tél: 514-255-HELP (4357) 1-877-336-7797

www.fortinbypass.com

Documents / Resources

FORTIN EVO ONE Remote Start Shark Electronics [pdf] Installation Guide
EVO ONE Remote Start Shark Electronics, EVO ONE, Remote Start Shark Electronics, Start Shark Electronics, Shark Electronics, Electronics

References

Leave a comment

Your email address will not be published. Required fields are marked *