Single Monitor Pegboard Panel Mount
Instruction Manual
MOUNT-PB1 Single Monitor Pegboard Panel Mount
SKU: MOUNT-PB1
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/mount-pb1
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
 |
 |
 |
| help@vivo-us.com | www.vivo-us.com Chat live with an agent! |
309-278-5303 |
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
TOOLS NEEDED
ASSEMBLY STEPS
STEP 1
Attach one set of Prongs (B) to the top of Mount Base (A) using M4x8mm Screws (S-B) and a Phillips head screwdriver. Ensure that VESA Head (A1) is pointing up as shown below. 
STEP 2
Attach Mounts Base (A) with Prongs (B) to the pegboard. Instal remaining set of Prongs (B) to pegboard, slightly lifting Mount Base (A) forward to get the Prongs behind the Base. Secure Prongs (B) using M4x8mm Screws (S-B) and a Phillips head screwdriver.
STEP 3
Secure VESA Plate (C) to monitor using appropriate Screws (M-A thru M-D), Washers (M-E), and a Phillips head screwdriver. Spacers (M-F) may be required. 
STEP 4
Slide monitor with VESA Plate (C) onto the Mount Base (A). Secure VESA Plate (C) in place using M6x10mm Thumbscrew (S-A).
Adjust as Desired
If monitor is sagging or adjustments need to be made, use 6mm Allen Wrench (T-A) to tighten or loosen swivel joint on VESA Head (A1).
Adjust the positioning of monitor by loosen the four nuts on the Mount Base (A) using the Wrench (T-B).
Open Monday – Friday 7:00am – 7:00pm CS T,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
|
309-278-5303 | AVG. RESOLUTION TIME (within office hrs): 5M 4S |
|
www.vivo-us.com Chat live with an agent! |
AVG. RESOLUTION TIME (within office hrs): < 15 M |
|
help@vivo-us.com | AVG. RESPONSE TIME (within office hrs): 1HR 8M – 23% within < 15m – 38% within < 30m – 61% within < 1hr – 83% within < 2hr – 92% within < 3hr |
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 06/15/2023
REV1
Documents / Resources
 |
VIVO MOUNT-PB1 Single Monitor Pegboard Panel Mount [pdf] Instruction Manual MOUNT-PB1 Single Monitor Pegboard Panel Mount, MOUNT-PB1, Single Monitor Pegboard Panel Mount, Monitor Pegboard Panel Mount, Pegboard Panel Mount, Panel Mount, Mount |
References
-
Register a .US.COM domain today!
-
VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
-
Single Monitor Pegboard Panel Mount – VIVO - desk solutions, screen mounting, and more
- User Manual
