HAT 7000-1-8537H Innovative 7000 Dual Crossbar Monitor Arm
PARTS LIST
Installation Instructions
DESK CLAMP CONFIGURATION
OPTIONAL THRU-DESK CONFIGURATION
LEVEL ADJUSTMENT
- Use handle to level beam.
HANDLE ADJUSTMENT
- To adjust handle position, loosen the two set screws, adjust handle then retighten screws.
IMPORTANT!
- Monitor must be on arm
- Arm must be in mount
- Press the arm down to approximately parallel with the desk prior to turning the strength adjustment screw.
- If the arm drifts upward, turn the adjustment screw clockwise.
- If the arm drifts downward, turn the adjustment screw counter-clockwise.
OPTIONAL ADJUSTMENT
- In some instances, an additional counterbalance adjustment may be needed to allow the arm’s instant height adjustment function to work properly.
- If your arm is not staying in position after performing step 11, tighten the adjustment screw as shown.
Human Active Technology
- 800 524 2744
- customerservice@team-hat.com.
- team-hat.com.
Documents / Resources
 |
HAT 7000-1-8537H Innovative 7000 Dual Crossbar Monitor Arm [pdf] Instruction Manual 7000-1-8537H Innovative 7000 Dual Crossbar Monitor Arm, 7000-1-8537H, Innovative 7000 Dual Crossbar Monitor Arm, 7000 Dual Crossbar Monitor Arm, Dual Crossbar Monitor Arm, Crossbar Monitor Arm, Monitor Arm |
Pacific Coast Company 
Home - Human Active Technology 