Valera 533 Bath Dryer Action Super Plus 1200 Instruction Manual

533 Bath Dryer Action Super Plus 1200
Instruction Manual

533 Bath Dryer Action Super Plus 1200

Hosteleria10.com

Guarantee card
Stamp and signature of delear
INSTRUCTIONS FOR USE AND INSTALLATION
Hairdryer
Wall holder
Mod. Nr.
Date of purchase
Name and full address of purchaser
Ligo Electric SA – 6853 Ligornetto / Mendrisio – Switzerland

ASSEMBLY AND OPERATING INSTRUCTIONS

Original instructions
Read these instructions thoroughly. Available also on www.valera.com

CAUTION

• For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.
• Make sure the electrical system is fitted with a device which guarantees omnipolar disconnection from the electricity mains under category III overvoltage conditions.
• Make sure the unit is perfectly dry before using it.
• WARNING: Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
• This hairdryer must be fixed so that a person taking a bath or shower cannot reach the handle, considering the cord at maximum extension.
• This appliance can be used by children from 8 years of age and over, and by persons with limited physical, sensory or mental abilities or who lack the relevant experience and knowledge, if they are suitably supervised or have been educated to use the appliance safely and made aware of the associated risks.
• Do not allow children to play with the appliance.
• Children must not perform cleaning and maintenance procedures unless supervised.
• Do not use your unit if it is not working properly. Do not try to repair this electrical unit yourself, rather contact an authorized technician. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard.
• Plug the hairdryer into an alternating current outlet only, and make sure that the voltage of your electricity supply is the same as that indicated on the rating plate of the appliance.
• Do not immerse in water or other liquids.
• Never put the appliance in a place where it could fall into water or in other liquids.
• Do not try to salvage an electrical appliance which has fallen into water.
• Turn the unit off when you put it down.
• Unplug the appliance when not in use, but never do it by pulling the cord.
• Allow your appliance to cool before storing away and do not wrap the supply cord around the hairdryer in storage.
• The A-weighted sound pressure level of the hairdryers for commercial use is below 70 dB(A).
• Designation of the appliance (see technical product specifications) WALL-MOUNTED HAIRDRYER FOR COMMERCIAL USE

INSTALLATION INSTRUCTIONS

Wall holder for hairdryer
Type 036 – 038A – 038B
Type 036
Front housing model.
Type 038A
Vertical housing model.
Type 038B
As the 038A but with no switch.
Installation of wall holder
This wall holder must only be installed by a qualified electrician in conformity to applicable safety standards.
The wall holder may be installed in one of two ways:
A = for fixed connection lead
B = for mobile connection lead
Attention: before installing the wall holder always switch off the general switch of your mains electricity.
For each pole a switch with a minimum break distance between contacts of 3 mm must be fitted up-line of the appliance.
Each time the appliance is opened, the switch must be used to disconnect the appliance.
The connection wiring must be at least type H05VV-F 2×1,0 mm².
Method A
IMPORTANT: Refer to the figures for the model you have purchased.

1. Unscrew the screw (1) (fig. 1) and remove the cover from the wall unit.
2. Break the plastic membrane (3) at the back of the wall unit (fig. 3A).
3. Route the main power cable from the wall (4) through the hole left by the plastic membrane (3) (fig. 3A).
4. Fix the back of the wall unit to the wall using the fixing screws and wall plugs provided (fig. 2).
5. Remove the terminal strip (5). The input power cable (4) and the output power cable (9) of hairdryer with max input current of 10A, if not already connected, must be connected to the terminal strip(5).
   In mod. 036 the Neutral output cable(9) must be connected to terminal strip(5) and the Line output cable (9) to terminal strip (11).
6. Reposition the terminal strip. Tighten the cable clamp (6 and 10) with its own screws. (fig. 3A). IMPORTANT: This appliance is double insulated and has no ground (earth) connection.
7. Fit the cover back on the wall unit with (1) (fig. 1).
8. Switch the power on at the mains switch. The hair dryer is now ready to use.

GUARANTEE

VALERA guarantees the appliance you have bought at following conditions:

1. The guarantee conditions for this appliance are as defined by our dealer in the country of sale. In Switzerland and in the countries subject to the European directive 44/99/CE the guarantee period is 24 months for domestic use and 6 months for professional or similar use. The guarantee period starts from the date of purchase as stated on the present guarantee card regularly filled out and stamped by the dealer or on the sale’s invoice.
2. The guarantee is applicable only against submission of the present guarantee card or the sale’s invoice.
3. The guarantee covers the elimination of all defects arisen during the guarantee period resulting from proven faults in material or workmanship. The elimination of the defects will be made either by repairing the appliance or exchanging it. The guarantee does not cover any damage arising from incorrect connection to the power supply, improper use, breakage, normal wear and non-compliance with the Instructions for Use.
4. All other claims of any nature, including those for eventual damages outside of the appliance, are excluded, unless ou( liability is legally mandatory.
5. The guarantee service is carried out free of charge; it does not affect the expiry date of the guarantee.
6. The guarantee becomes void if repairs are under-taken by unauthorized persons.

For UK only: this guarantee in no way affects your rights under statutory law.
In case of defect, please return the appliance well packed and together with the guarantee card regularly dated and stamped to one of our Valera Service Centres or to the dealer who will send it to the official importer for the guarantee service.
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

VALERA is a registered trade mark of Ligo Electric S.A. – Switzerland

WARNING

CH
CH VALERA – Service
Via Ponte Laveggio, 9
6853 Ligornetto / Mendrisio
Other countries www.valera.com/service

Mod. Nr.
Date of purchase
Name and full address of purchaser
Made by Ligo Electric SA – Via Ponte Laveggio, 9
6853 Ligornetto / Mendrisio – Switzerland
Valera is a registered trademark of Ligo Electric S.A. – Switzerland

Documents / Resources

Valera 533 Bath Dryer Action Super Plus 1200 [pdf] Instruction Manual 533 Bath Dryer Action Super Plus 1200, 533, Bath Dryer Action Super Plus 1200, Action Super Plus 1200, Super Plus 1200, Plus 1200

References

• Valera - The Swiss Hair Specialists
• Material para Hostelería y Comercio - Productos y Maquinaria
• User Manual