EPROPULSION DDR-60L-15 DCDC 48v-12v 60w Suitable E60 for Battery
Specifications
- Output: 14V
- Rated current: 4A
- Max power: 60W
- Input Voltage Range: DC18-75V
- Efficiency: 92%
- Protection:
- Overload protection
- Overvoltage protection
- Reverse polarity protection
- Undervoltage lockout
Product Usage Instructions
Connection Method
To connect the E60/E163 to power a 12V device, follow these steps:
- Connect the input wires of the DCDC to the corresponding polarity on the E Battery Bus Bar 150A.
- Connect the E60/E163 to the corresponding polarity on the E Battery Bridging Cable.
Installation Instructions
Peel off the outer layer of the wire by 5 to 8mm, and use a crimping plier to crimp the terminals.
Warranty
Propulsion DCDC 48V-12V 60W is guaranteed against any manufacturing defects for TWO years from the date of delivery of products to end customers. Free warranty is only validated upon the presentation of a legal serial number, Warranty Card, and evidence of purchase from an authorized propulsion dealer.
Notes
- Do not reverse the input and output terminals.
- Do not reverse the positive and negative poles of the DCDC.
- Use the DCDC within the specified voltage range.
Introduction
- Thank you for purchasing Propulsion DCDC 48V-12V 60W.
- This DCDC is specially designed for E60/E163 Battery.
Specifications
Output | |
Rated Voltage | 14V |
Rated current | 4A |
Max power | 60W |
Input | |
Voltage range | DC18-75V |
Efficiency | 92% |
Protection | |
Overload protection |
Constant current mode protection, automatically restores after abnormal conditions are removed. |
Overvoltage protection |
Shuts off output, automatically restores after abnormal conditions are removed. |
Reverse polarity |
Automatically restores through the power supply’s internal MOSFET after removing the load’s abnormal condition, without damage. |
Undervoltage lockout | Output is turned off when the input voltage is less than 18VDC |
Environment | |
Operating temperature | -40 to +85℃ |
Operating humidity | 5 to 95% RH ,No condensation |
Altitude | 3000m |
Certification |
CE-EMC、CE-LVD、UKCA-LVD、UKCA-EMC、FCC |
Dimension | |
Weight | 950 g |
Dimensions | 148 X 66 X 56 mm |
Cable Length | Input:500mm Output:500mm |
Dimensions
Packing List
Item | Qty. | 备注 |
DCDC 48v-12v 60w | 1 set | / |
Tapping Screw M4x16 | 4 pcs | / |
Ring Terminals RNBL1-6-90D | 6 pcs | Wire Range: 22-16 A.W.G (0.5- 1.5mm²) |
DCDC 48v-12v 60w User Manual | 1 pcs | / |
Notes
- Do not reverse the input and output terminals.
- Do not reverse the positive and negative poles of the DCDC.
- Use the DCDC within the specified voltage range.
- The installation process requires the following tools: Phillips screwdriver, and wire crimping pliers (1- 5mm²).
Connection Method
Battery Bridging Cabke(Positive)
To connect the E60/E163 to power a 12V device, you will need to purchase the following additional materials:
No. | Item | Qty. | Operation |
① |
E Battery Bus Bar 150A |
1 set |
Connect the input wires of the DCDC to the corresponding polarity on the Bus
Bar. |
② |
E Battery Bridging Cable |
1 set |
Connect the E60/E163 to the corresponding polarity on the Bus Bar. |
To connect the E60/E163 to power a 12V device, you will need to purchase the following additional materials:
Installation Instructions
Warranty
- Propulsion DCDC 48V-12V 60W is guaranteed against any manufacturing defects for TWO years from the date of delivery of products to end customers.
- Free warranty is only validated upon the presentation of the legal serial number, Warranty Card, and evidence of purchase from an authorized propulsion dealer.
Conditions
- The valid date of purchase should be established by the first-hand purchaser with the original sales slip. The free warranty is not transferable and will not be reissued.
- The warranty is valid only when the information is correct and complete.
Warranty does not cover
- Minor faults produce no influence on the intended function of the product.
- Faults resulting from any improper operation that contradicts the user manual.
- Accessories supplied with the product.
- Damage caused by accident, misuse or unauthorized repair.
- Damage caused by dropping, improper care or storage.
- If the warranty expires, users can still enjoy maintenance services from propulsion-authorized dealers with minimum maintenance charges.
FAQ
What should I do if my DCDC is not working?
If your DCDC is not working properly, check the following:
- Ensure that the input and output terminals are correctly connected.
- Verify that the input voltage is within the specified range(DC18-75V).
- If the issue persists, contact propulsion-authorized dealers for further assistance.
How do I claim a warranty for my DCDC?
To claim a warranty for your DCDC, make sure you have the following:
- Legal serial number
- Warranty Card
- Evidence of purchase from an authorized propulsion dealer
Contact propulsion support with these details to initiate the warranty claim process.
Documents / Resources
EPROPULSION DDR-60L-15 DCDC 48v-12v 60w Suitable E60 for Battery [pdf] User Manual DDR-60L-15 DCDC 48v-12v 60w Suitable E60 for Battery, DDR-60L-15, DCDC 48v-12v 60w Suitable E60 for Battery, Suitable E60 for Battery, Battery |