BRESSER-LOGO

BRESSER 7007500HZI000 WFS WFW ClimaTrend

BRESSER-7007500HZI000-WFS-WFW-ClimaTrend-product

Product Information

Product Name: ClimaTrend WFS/WFW Product Art.
No.: 7007500HZI000, 7007500GYE000

Product Usage Instructions

  1. Visit our website via the following QR Code or web link to find further information on this product or the available translations of these instructions.
  2. To activate or deactivate temperature and/or frost warning, press the MODE button (C) to enter the settings mode. Use the UP button (D) and DOWN button (E) to adjust the values.
  3. The HISTORY button (G) is used to view the temperature, humidity, and weather trend history.
  4. The CITY button (H) is used to set the location for sunrise and sunset information.
  5. The CHANNEL button (F) is used to select the transmission channel (1-3).
  6. The SNOOZE/LIGHT button (I) is used to activate the snooze function and to turn on the backlight.
  7. The TEST button (1^) is used to test the sensor.
  8. Before using the product, make sure to insert the required batteries: 3 pieces of 1.5V AA batteries for the base station and 2 pieces of 1.5V AAA batteries for the sensor.
  9. The LCD display (B) shows various information including temperature, humidity, weather conditions, and time.
  10. The CH-Slide switch (1$) is used to select the transmission channel for the sensor.
  11. The BATTERY COMPARTMENT (1#) is where the batteries are inserted.
  12. The A1 and A2 buttons are used to set the alarm. When the alarm is activated, the alarm icon will be displayed on the LCD screen.
  13. To manually set the time and date, follow the instructions provided in the manual.
  14. To activate or deactivate temperature alarm and/or frost warning,  use the corresponding buttons.
  15. The sunrise and sunset times forthe selected location are displayed on the LCD screen.
  16. The HI, MID, and LO buttons are used to view the tide levels.
  17. For troubleshooting and technical specifications, refer to the user manual.

For more detailed information and translations, please visit our website at www.bresser.de/P7007500000000. Please note that this is a general overview of the product information and usage instructions. For specific instructions and details, refer to the user manual provided with the product.

Visit our website via the following QR Code or web link to find further information on this product or the available translations of these instructions.

ClimaTrend WFS/WFW

Art. No. 7007500HZI000
Art. No. 7007500GYE000

www.bresser.de/P7007500000000

GENERAL INFORMATION

About this Instruction Manual
These operating instructions are to be considered a component of the device. Please read the safety instructions and the operating instructions carefully before use.
Keep these instructions for renewed use at a later date. When the device is sold or given to someone else, the instruction manual must be provided to the new owner/user of the product.

Intended Use
This product is intended only for private use. It was developed as an electronic medium for the use of multimedia services.

GENERAL WARNINGS

DANGER!
You will find this symbol before every section of text that deals with the risk of minor to severe injuries resulting from improper use.

NOTE!
You will find this symbol in front of every section of text which deals with the risk of damage to property or the environment.

RISK OF CHOKING
There is a RISK OF CHOKING.

RISK of ELECTRIC SHOCK!
This device contains electronic components that operate via a power source (power supply and/or batteries). Only use the device as described in the manual; otherwise, you run the risk of an electric shock.

RISK OF CHEMICAL BURN!
Leaking battery acid can lead to chemical burns. Avoid contact of battery acid with skin, eyes and mucous membranes. In the event of contact, rinse the affected region immediately with a plenty of water and seek medical attention.

RISK of FIRE/EXPLOSION!
Do not expose the device to high temperatures. Use only the recommended batteries. Do not short-circuit the device or batteries, or throw them into a fire. Excessive heat or improper handling could trigger a short-circuit, a fire or an explosion.
RISK of property damage!
Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer will contact the Service Centre and can send the device in to be repaired, if necessary.

NOTE!

  • Do not immerse the unit in water.
  • Do not subject the unit to excessive force, shock, dust, extreme temperature or high humidity, which may result in malfunction, shorter electronic life span, damaged batteries and distorted parts.
  • Use only the recommended batteries. Always replace weak or empty batteries with a new, complete set of batteries at full capacity. Do not use batteries from different brands or with different capacities. Remove the batteries from the unit if it has not been used for a long time.
  • The manufacturer is not liable for damage related to improperly installed batteries!

 

EC DECLARATION OF CONFORMITY
Hereby, Bresser GmbH declares that the equipment type with part number: 7007500000000 is in compliance with Directive: 2014/30/ EU. The full text of the EU declaration of conformity is available at the following internet address:
www.bresser.de/download/7007500000000/CE/7007500000000_CE.pdf

UKCA DECLARATION OF CONFORMITY
Bresser GmbH has issued a „Declaration of Conformity“ in accordance with applicable guidelines and corresponding standards. The full text of the UKCA declaration of conformity is available at the following internet address:
www.bresser.de/download/7007500000000/UKCA/7007500000000_UKCA.pdf

CLEANING AND MAINTENANCE

Before cleaning the device, disconnect it from the power supply (remove plug or remove batteries)!

Only use a dry cloth to clean the exterior of the device. To avoid damaging the electronics, do not use any cleaning fluid.

DISPOSAL
Dispose of the packaging materials properly, according to their type, such as paper or cardboard. Contact your local waste-disposal service or environmental authority for information on the proper disposal.
Do not dispose of electronic devices in the household garbage!

As per Directive 2002/96/EC of the European Parliament on waste electrical and electronic equipment and its adaptation into German law, used electronic devices must be collected separately and recycled in an environmentally friendly manner.

In accordance with the regulations concerning batteries and rechargeable batteries, disposing of them in the normal household waste is explicitly forbidden.
Please make sure to dispose of your used batteries as required by law– at a local collection point or in the retail market. Disposal in domestic waste violates the Battery Directive.

SCOPE OF DELIVERY (Fig. 1)

Main unit (A), remote sensor (B), instruction manual Required batteries (not included with purchase): 3 pieces of mignon batteries (1.5V, type AA / LR6) and 2 pieces of micro batteries (1.5V, type AAA / LR03)

BRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (1)

PARTS OVERVIEW

Main Unit (Fig. 2)

BRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (2)

  1. LCD Display
    Weather forecast, temperature trend, indoor and outdoor humidity (relative humidity), indoor and outdoor temperature, air pressure as well as date and time. Sunrise/Sunset, moon phases, tides, climate indicator, general weather conditions (weather frog), temperature and frost warning, dual alarm time.
  2. MODE buttonBRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (4)
    Switch between time and alarm mode. Press and hold for 2 seconds when in the appropriate mode to enter setting mode for time and date as well as changing the alarm time.
  3. UP buttonBRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (5)
    Display MIN/MAX values for temperature and humidity. In settings mode:
    Setting a value.
  4. DOWN buttonBRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (6)
    Enable/Disable temperature and/or frost warning. In settings mode: Setting a value.
  5. CHANNEL buttonBRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (7)
    Press ‘channel’ repeatedly to successively display the information of the different remote sensors (optional: up to 3 outdoor sensors can be connected).
    Press and hold for 2 seconds to initialize transmission of the RC signal from the remote sensor.
    Note:
    The function for changing the display is only activated when at least two remote sensors are connected.
  6. HISTORY buttonBRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (8)
    Display barometric pressure values of the last 12 hours. Press and hold for 2 seconds to enter settings mode for the barometric pressure unit (Abs = absolute / Rel = relative).
  7. CITY buttonBRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (9)
    Press to enter settings mode for city selection.
  8. SNOOZE/LIGHT buttonBRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (10)
    Press to interrupt an alarm or press to enable background lightning for 5 seconds.
  9. Wall-mount recessed hole
    This hole makes it possible to mount the main unit on a wall.
  10. Battery compartment
  11. Table stand
    Foldable. Use this stand to place the device on a flat surface.
    Remote sensor (Fig. 3)BRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (3)
  12. Display
    Outdoor temperature, humidity, transmission channel
  13. Battery compartment
  14. CH slide switch
    Select a channel (1-3).
  15. Wall mount hole
    This hole makes it possible to mount the remote sensor on a wall.
  16. TEST button
    Transmits the current measured values
  17. °C/°F button
    This button selects between Celsius (°C) and Fahrenheit (°F).
  18. Table stand
    Foldable. Use this stand to place the device on a flat surface.

BEFORE YOU START

IMPORTANT!

  1. Insert batteries for the main unit before start operation of the remote sensors.
  2. Place the main unit as close as possible to the remote unit.
  3. Position the remote unit and main unit within the effective transmission range.

When changing batteries always change batteries in the main unit as well as all remote units and replace them in the correct order, so the remote connection can be re-established. If batteries are exchanged in only one of the devices (i.e. the remote sensor) the signal can’t be received or can’t be received correctly.
Note, that the effective range is vastly affected by building materials and position of the main and remote units. Due to external influences (various RC devices and other sources of interference), the maximum distance can be greatly reduced. In such cases we suggest to position the main unit and the remote sensor at other places. Sometimes all it takes is a relocation of one of these components of a few inches!
Though the remote unit is weather proof, it should be placed away from direct sunlight, rain or snow.

POWER SUPPLY

Main unit

  1. Open the battery compartment door.
  2. Install 3 batteries (AA size 1.5V) strictly according to the polarities shown.
  3. Reinsert the battery compartment door.

Outdoor sensor

  1. Open the battery compartment door.
  2. Install 2 batteries (AAA size 1.5V) strictly according to the polarities shown.
  3. Press the CH button until the desired transmission channel will be dis played (CH1 to CH3) (if only one remote sensor is connected, always select channel 1).
  4. Reinsert the battery compartment door.

Low battery warning

When batteries need to be replaced the respective low battery indicator BRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (11) will be shown near the indoor temperature display (batteries for main unit) or near to the outdoor temperature (batteries for remote sensor).

USING TABLE STAND OR WALL MOUNTING
The main unit has a removable table stand, which – when connected – can support the unit on a flat surface. It is possible to remove the stand and mount the unit on a wall using the recessed screw hole. The same applies to the remote unit; it can be placed on a flat surface or mounted on a wall using the recessed screw hole.

OPERATION

Receiving measurements and time signal
Once batteries are placed in the remote unit, it will start transmitting temperature readings at roughly 45 second intervals. As soon as batteries are installed in the main unit it will start searching for a signal from the remote sensor for about 3 minutes. Upon successful reception of the signal, the outdoor temperature will be displayed on the main unit. The main unit will automatically update its readings at about 45 second intervals.
Subsequently, the main unit will attempt to receive the DCF77 radio signal.
The reception symbol flashes. When the time signal is received after 3-5 minutes, the current time and date appear in the display. The reception symbol will now be shown permanently in the display. Date and time are automatically updated daily at 2:05 o’clock (CET) by the main unit.

Temperature and humidity
Once the batteries are installed the main unit will start displaying the interior measurement information. The main unit will display the information from the remote sensor for the first time approximately 3 minutes after the power supply was established.

COMFORT LEVEL

  • humidity is same or lower than 40%BRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (12)
  • humidity is same or higher than 70%BRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (13)
  • humidity is higher than 40% but lower than 70%; at same time, the temperature is higher than 20°C (68°F), but lower than 27°C (80.6°F)BRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (14)

Max/Min records of temperature and humidity

  1. Pressing and releasing the UP button in short intervals repeatedly makes the display alternate between the current temperature and humidity as well as MIN/MAX recordings.
  2. In MIN/MAX temperature display mode, hold UP button to reset all indoor and outdoor MIN/MAX records to current values.
  3. The MIN/MAX temperature and humidity values will be recorded automatically.
  4. The MIN/MAX temperature and humidity records automatically will be reset at 0:00 o’clock (12:00 a.m.) every day.

CURRENT WEATHER AND WEATHER TREND

The weather forecast is depending on the fluctuation of temperature and humidity. From these values a weather forecast for the next 6 hours is calculated.

Current weather

BRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (15)

BRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (16)

Weather trend display

BRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (17)

Temperature, humidity and weather trend

BRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (18)Rising  BRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (19)Steady  BRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (20)Falling

AIR PRESSURE
The values for air pressure will be updated each hour and will be displayed as a numerical value between 800 and 1100 hPa. The air pressure trend of the past 12 hours will be stored and displayed in a graph (history).

Manual air pressure setting

  1. Search for the relative air pressure value for the current location or the city nearest by in the internet.
  2. In normal display mode, press the HISTORY button for approx. 2 seconds to enter air pressure settings mode.
  3. Press the UP or DOWN button to select the relative air pressure (Rel).
  4. Press the HISTORY button. The air pressure display flashes.
  5. Press the UP or DOWN button to set the air pressure value found in the internet.
  6. Press the HISTORY button to save the settings.

MAIN UNIT SIGNAL RECEIVING CHECK

The transmission range is about 30 meters from the remote station to the main unit (in open area). The main unit should receive the temperature/ humidity information from the transmitter within 3 minutes after set-up.
Should the main unit not receive information from transmitter within 3 minutes after setting up, please check following steps:

  1. Press and hold CHANNEL button for 2-3 sec to re-start receiving from the transmitter; the data will normally be received within 3 minutes.
  2. If the first step does not yield a desirable solution, please remove the batteries and re-install them (hardware reset).

At the same time, please make sure the following:

  1. The main unit as well the as transmitter should be at least 5-6.5 feet (1.5-2 meters) away from any interfering sources, such as computer monitors or TV sets.
  2. The main unit should not stand close to metal window frames.
  3. Please do not using other electrical products, such as headphones or speakers, operating on the same signal frequency (433.92 MHz).
  4. Electrical devices operating on the same signal frequency may also cause interference. This can include devices used in the neighborhood as well.

Main unit channel setting

  1. The main unit can be connected with a maximum of up to 3 transmitters.
  2. Press the CHANNEL button to switch between the displays of each channel.
    The main unit will display the information of the corresponding transmitter. When the symbolBRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (21) is displayed near the channel information the automatic display rotation is activated. The display changes between the information of the connected remote sensors every 10 seconds.

NOTE!
The function to change the channels by pressing the CH-button can be used only if more than one remote sensor is connected with the main unit.
Otherwise this function is disabled.

Automatic time setting

  1. After the batteries are installed. The clock will automatically search for the radio signal. It takes about 3-5 minutes to finish this process.
  2. If the radio signal is received, the date and time will be set automatically and the radio control signal icon BRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (22)turns on.
    If the clock fails to receive the time signal, go ahead with the following steps:
    1. Press UP and DOWN button at the same time for approx. 3 seconds to initialize radio signal reception manually.
    2. If the time signal receiving fails again, the time can be set manually.

Manual time setting and user-defined settings

  1. In normal display mode, press and hold the MODE button for approx 2 seconds to enter settings mode. ‘24Hr’ will flash.
  2. Press the UP or DOWN button to change the value.
  3. Press the MODE button to confirm and go to the next value to be changed.
  4. The setting order is 24/12 hour mode >> °C/°F >> hPa/inHg >> time zone (-2 to +2 hours) >> hours >> minutes >> year >> month >> date >> language (GE = german / EN = english / IT = italian / FR = french / SP = spanisch) >> save and exit.
  5. If there is no operation for 20 seconds, the existing setting will be saved and the device returns to normal display mode. You can also press the MODE button again to confirm and exit.
    NOTE!
    Independent from the time setting method we recommend to select the city next to you manually (see “Set city”).

SET CITY
Manually set the city next to you as follows to ensure that the moon phases, tides and sunset and sunrise are displayed correctly.

  1. Press the CITY button.
  2. Press the UP or DOWN button to set the desired city (see table ‘Cities’ for an explanation of the city tokens)
  3. Press the CITY button again.

ALARM SETTING

  1. Press the MODE button once or several times to display one of the two alternative wake up times. Once a mode is selected hold the MODE button for 2 seconds to get into alarm setting mode.
  2. The figure to be set will start flashing.
  3. Press the DOWN or UP button to change this setting.
  4. Press the MODE button to confirm and go to the next setting.
  5. The setting order is hour >> minute >> save and exit.
  6. Press MODE again to confirm and exit setting mode.
  7. Press the UP button to turn on or off alarm A1, A2, or both. When the alarm is activated, the icon BRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (23)is showed on the screen. When this alarm bell symbol is not displayed the alarm is off.
  8. The alarm sounds for a total of 2 minutes and will change characteristics along that time.

SNOOZE/LIGHT FUNCTION

  1. When alarm is ringing, you can press the SNOOZE/LIGHT button to silence it for 5 minutes. The iconBRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (24) will now flash as well.
  2. Press any other button to turn off the alarm. The alarm will activate again after 24 hours at the set time.
  3. During normal operation mode, a press of the SNOOZE/LIGHT button turns on the backlight for 10 seconds.

TEMPERATURE BUZZER SETTING

  1. Press and hold the DOWN button in normal display mode for 2 seconds to enter into temperature buzzer setting. The temperature indicator for the remote sensor will flash and the symbol BRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (25)will be displayed in front of it.
    NOTE!
    Make sure that you have set the correct channel for the desired sensor.
  2. Press the DOWN or UP button to set the desired value for the maximum temperature.
  3. Press the MODE button to confirm and go to the next setting.
  4. The setting order is: temperature buzzer ON/OFF >> highest temperature limit >> lowest temperature limit. If the UP or DOWN button is held and presses continuously, the value will change faster.
    NOTE!
    The range for maximum upper limit is 70° and maximum limit for lower temperatures is -50°.
  5. Press MODE button again to confirm and exit setting.

 

NOTE!
As long as the outside temperature has exceeded or fallen below the set limits,the alarm will sound every minute for a duration of 2 seconds. Furthermore the display for the outdoor temperature and the symbolsBRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (25) orBRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (26) are flashing.
FROST WARNING
If the frost warning is activated, an alarm will sound for approx. 5 seconds and the symbolBRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (27)will flash as long as the outdoor temperature is between -1.0 and +2.9 °C (+30.2 and 37.3 °F).
Activate temperature alarm and/or frost warning
In normal display mode press the DOWN button to enable or disable the temperature alarm BRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (28), the frost warning BRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (27)or both together one by another.
SUNRISE AND SUNSET
The time for sunrise and sunset for the desired city will be displayed next to the symbolBRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (29) (sunrise) andBRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (30) (sunset).
TIDES
The tides are displayed next to the current time as described below:

  • HI Highest tide water level
  • MID Middle tide water level
  • LO Lowest tide water level

MOON PHASES
Symbols for the moon phases:

Northern hemisphere:

BRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (31) BRESSER-7007500HZI000-WFS-WFW-ClimaTrend-FIG- (32)

TROUBLESHOOTING

Signal disconnection
If without obvious reasons the display of the outdoor temperature goes blank, please check the following:

  1. The remote unit is still in place.
  2. The batteries of both the remote unit and main unit are not empty. Replace batteries with new ones if necessary.
    Note: When the temperature falls below freezing point, the batteries of outdoor units will freeze, lowering their voltage supply, effective range, and life span.
  3. All units required are within range and the path is clear of obstacles and interference. Shorten the distance if necessary.

Transmission collision
Signals from other household devices, such as door bells, home security systems and entry controls, may interfere with those of this product and cause temporarily reception failure. This is normal and does not affect the general performance of the product. The transmission and reception of temperature readings will resume once the interference recedes.

SPECIFICATIONS

  • Measurement
    • Indoor temperature range: 0-50° C
    • Outdoor Temperature Range: -20-60° C
    • Resolution for temperature: 0.1° C
    • Humidity range: 20-90%
    • Resolution for humidity: 1%
  • Transmission
    • Transmission range between transmitter and main unit: 30meters (in open area) Radio frequency: 433.92 MHz
  • Power supply
    • Main unit: 3x AA 1.5V battery
    • Remote sensor: 2x AAA 1.5V battery

WARRANTY & SERVICE
The regular warranty period is 2 years and begins on the day of purchase.
To benefit from an extended voluntary guarantee period as stated on the gift box, registration on our website is required.
You can consult the full warranty terms as well as information on extending the warranty period and details of our services at www.bresser.de/warranty_terms.

Bresser GmbH
Gutenbergstraße 2
46414 Rhede · Germany
Tel. +49 (0)2872 – 80 74 -0
www.bresser.de
@BresserEurope

Bresser GmbH
Suite 3G, Eden House, Enterprise Way
Edenbridge, Kent TN8 6HF, Great Britain
www.bresseruk.com

Documents / Resources

BRESSER 7007500HZI000 WFS WFW ClimaTrend [pdf] Instruction Manual
7007500HZI000 WFS WFW ClimaTrend, 7007500HZI000, WFS WFW ClimaTrend, WFW ClimaTrend, ClimaTrend

References

Leave a comment

Your email address will not be published. Required fields are marked *