KOLLEKTIV WERKS HON11CTRB Honda Fl5 Civic Type-R Installation Guide

KOLLEKTIV WERKS HON11CTRB Honda Fl5 Civic Type-R

Product Information

• Product Name: No Drill Center Mount Licence Plate Holder
• SKU: HON11CTRB
• Compatible Vehicle: Honda FL5 Civic TYPE-R
• Email Support: support@kollektivwerks.com
• Revision: 00

Specifications

• Bill of Material: KW 4mm Allen Key Tool, M6 x 30mm, M6 x 25mm, M6 x 14mm, M6 x 8mm, 12mm
• Component List: HON11CTRB-BR, HON11CTRB-BL, HON11CTRB-FR, HON11CTRB-FL, KW-NA-LPB-XXX (Plate Bracket)

Installation Guide

• Step 1: Assembly Side View
  To be installed in the highlighted location only. Refer to the side view diagram:
• Step 2: Insert Back Plate
• 1. Insert the HON11CTRB-BL (Back Plate) into the grille.
  2. Bolt the HON11CTRB-BL (Back Plate) and HON11CTRB-FR (Front Plate) together.
  3. Ensure that the writing is upright.
  4. Important: Do not use power tools and do not over tighten.
• Step 3: Install Bracket
• 1. Install the KW-NA-LPB-XXX (License Plate Bracket) as shown.
  2. Center the bracket and tighten.
  3. Ensure that the writing is upright.
  4. Important: Do not use power tools and do not over tighten.
• Step 4: Install License Plate
• 1. Install the license plate onto the license plate bracket.
  2. If using a license plate cover, use M6x14mm bolts. Otherwise, use M6x8mm bolts.
• Step 5: Enjoy Your New License Plate Holder
  Congratulations! You have successfully installed your KW license plate holder.

FAQ

• Can I use power tools to install the license plate holder?
  No, it is recommended not to use power tools to avoid over tightening.
• Can I install the license plate holder in any location on my vehicle?
  No, the license plate holder should only be installed in the highlighted location as shown in the installation guide.

Bill of material

Component list

IMPORTANT!
To be installed in highlighted location only!

Assembly Side View

installation guide

1. Insert back plate into the grille and bolt together with front plate. Ensure writing is upright .
   • DO NOT USE POWER TOOLS!!
   • DO NOT OVER TIGHTEN!!

     

2. Install bracket as shown. Center bracket and tighten. Ensure writing is upright.
   • DO NOT USE POWER TOOLS!!
   • DO NOT OVER TIGHTEN!!

     

3. Install license plate to license plate bracket.
   Install M6x14mm bolts with a license plate cover otherwise use
   M6x8mm bolts.

   

4. Enjoy your new KW license plate holder!

   

Documents / Resources

KOLLEKTIV WERKS HON11CTRB Honda Fl5 Civic Type-R [pdf] Installation Guide HON11CTRB Honda Fl5 Civic Type-R, HON11CTRB, Honda Fl5 Civic Type-R, Civic Type-R, Type-R

References

• User Manual