LED Monitor applies LCD screen with LED backlights
OWnEr’s ManuaL
LED LCD MOnITOr
(LED Monitor*)
* LG LED Monitor applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference.
29WP500 34WP500 34WP550
www.lg.com Copyright © 2020 LG Electronics Inc. all rights reserved.
ENGLISH
TABLE OF CONTENTS
LICEnsE ……………………………………………… 2 assEMBLInG anD PrEParInG ……………… 3 usInG THE MOnITOr……………………………. 9 usEr sETTInGs …………………………………. 10 TrOuBLEsHOOTInG …………………………… 18 PrODuCT sPECIFICaTIOn……………………. 20
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing administrator, Inc.
2
ENGLISH
ASSEMBLING AND PREPARING
CAUTION · always use genuine LG components to ensure safety and product performance. · The product warranty will not cover damage or injury caused by the use of unauthorized components. · It is recommended that use the supplied components. · If you use generic cables not certified by LG, the screen may not display or there may be image noises. · Illustrations in this document represent typical procedures, so they may look different from the actual product. · Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing
so may damage the product.) · applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty. · Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand
and could result in personal injury. · When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen
may cause damage to it. · For wave pattern on appearance, unlike the general method of coating, it’s applied to added glittering material
in raw material.With no peeled-off appearance, it has good durability. Please use it with confidence because there is no problem in using the product at all.
NOTE · The components may look different from those illustrated here. · Without prior notice, all product information and specifications contained in this manual are subject to change
to improve the performance of the product. · To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer
from which you purchased the product. · The power cord provided may differ depending upon the region.
Supported Drivers and Software
You can download and install the latest version from the LGE website (www.lg.com).
Drivers and Software Monitor Driver OnScreen Control Dual Controller
Installation Priority recommended recommended Optional
3
ENGLISH
Product and Button Description
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right/up/ down with your finger.
Basic Functions
Power on
Press the joystick button once with your finger to turn on the monitor.
Power off
Press and hold the joystick button once more than 3 seconds with your finger to turn off the monitor.
/
Volume control
You can control the volume by moving the joystick button left/right.
NOTE · The joystick button is located at the bottom of the monitor.
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation, regardless of its shape or size. · Place the monitor in the original box or packing material before attempting to move it. · Before moving or lifting the monitor, disconnect the power cord and all other cables. · Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself. · When holding the monitor, the screen should face away from you to prevent it from being scratched. · When transporting the monitor, do not expose the monitor to shock or excessive vibration. · When moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.
29WP500
34WP500
34WP550
CAUTION · avoid touching the monitor screen as much as possible.
– This may result in damage to the screen or some of the pixels used to create images. · If you use the monitor panel without the stand base, its joystick button may cause the monitor to become
unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction.
4
ENGLISH
Installing on a Table
· Lift the monitor and place it on the table in an upright position. Place the monitor at least 100 mm away from the wall to ensure sufficient ventilation.
29WP500 34WP500
34WP550
Adjusting the Stand Height 34WP550 1 Place the monitor mounted on the stand base in an upright position. 2 Handle the monitor with both hands for safety.
Max 110.0 mm
100 mm 100 mm
100 mm 100 mm
100 mm 100 mm
100 mm 100 mm
CAUTION
· unplug the power cord before moving or installing the monitor. There is risk of electric shock. · Make sure to use the power cord that is provided in the product package and connect it to a grounded power
outlet. · If you need another power cord, please contact your local dealer or the nearest retail store.
WARNING · When adjusting the screen height, do not place your hand on the stand body to avoid injury to your fingers.
Adjusting the Angle 1 Place the monitor mounted on the stand base in an upright position. 2 adjust the angle of the screen.
29WP500 34WP500
The angle of the screen can be adjusted forward or backward from -5° to 15° for a comfortable viewing experience.
34WP550
The angle of the screen can be adjusted forward or backward from -5° to 20° for a comfortable viewing experience.
5
ENGLISH
WARNING
· To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as illustrated below.
· Be careful not to touch or press the screen area when adjusting the angle of the monitor.
29WP500
34WP500
Using the Kensington Lock
The connector for the Kensington security system is located at the bottom of the monitor. For more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website at http://www.kensington.com. Connect the monitor to a table using the Kensington security system cable.
29WP500 34WP500
34WP550
34WP550
NOTE · The Kensington security system is optional. You can obtain optional accessories from most electronics stores.
6
ENGLISH
Installing the Wall Mount Plate
This monitor meets the specifications for the wall mount plate or other compatible devices.
NOTE · The wall mount plate is sold separately. · For more information on installation, refer to the wall mount plate’s installation guide. · Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the
screen. · remove the stand before installing the monitor on a wall mount by performing the stand attachment in
reverse.
Installing on the Wall
Install the monitor at least 100 mm away from the wall and leave about 100 mm of space at each side of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail store. alternatively, please refer to the manual for how to install and set up a tilting wall mounting bracket.
100 mm
100 mm 100 mm
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor. Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.
Wall Mount (mm) Standard screw Number of screws Wall Mount Plate (Optional)
100 x 100 M4 x L10
4 LsW 149
NOTE
· a non-VEsa standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable for any accidents relating to the use of non-standard screws.
· The wall mount kit includes the installation guide and all necessary parts. · The wall mounting bracket is optional. You can obtain optional accessories from your local dealer. · The length of the screw may differ for each wall mounting bracket. If you use screws longer than the standard
length, it may damage the inside of the product. · For more information, please refer to the user manual for the wall mounting bracket.
100 mm
7
ENGLISH
CAUTION · unplug the power cord before moving or installing the monitor to avoid electric shock. · Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead
to injury. use an authorized LG wall mount and contact the local dealer or qualified personnel. · applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty. · use the wall mounting bracket and screws that conform to VEsa standards. Damage caused by the use or
misuse of inappropriate components will not be covered by the product warranty. · When measured from the back of the monitor, the length of each installed screw must be 8 mm or less.
8
ENGLISH
USING THE MONITOR
Connecting AV Devices
· Illustrations in this manual may differ from the actual product. Press the joystick button, go to Settings Input, and then select the input option.
CAUTION · Do not press the screen for a prolonged time. This may cause image distortion. · Do not display a still image on the screen for a prolonged time. This may cause image retention. use a PC
screensaver if possible. · When connecting the power cord to the outlet, use a grounded (3-hole) power strip or a grounded power
outlet. · The monitor may flicker when turned on in an area where the temperature is low. This is normal. · sometimes red, green, or blue spots may appear on the screen. This is normal.
Connecting to a PC
· This monitor supports the *Plug and Play feature. * Plug and Play: a feature that allows you to add a device to your computer without having to reconfigure
anything or install any manual drivers.
HDMI Connection
Transmits digital video and audio signals from your PC to the monitor.
CAUTION · using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues. · use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not
display or a connection error may occur. · recommended HDMI cable types
– High-speed HDMI®/TM cable – High-speed HDMI®/TM cable with Ethernet
HDMI Connection
HDMI transmits digital video and audio signals from your aV device to the monitor.
NOTE · using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues. · use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not
display or a connection error may occur. · recommended HDMI cable types
– High-speed HDMI®/TM cable – High-speed HDMI®/TM cable with Ethernet
Connecting Peripherals
Headphones Connection
Connect peripherals to the monitor via the headphones port.
NOTE · Peripheral devices are sold separately. · Depending on the audio settings of the PC and external device, headphones and speaker functions may be
limited. · If you use angled earphones, it may cause a problem with connecting another external device to the monitor.
Therefore, it is recommended to use straight earphones.
angled
straight (recommend)
9
ENGLISH
USER SETTINGS
NOTE · Your monitor’s OsD (On screen Display) may differ slightly from that shown in this manual.
Activating the Main Menu
1 Press the joystick button on the bottom of the monitor. 2 Move the joystick up/down and left/right to set the options. 3 Press the joystick button once more to exit the main menu.
Joystick Button
Button
Menu Status Main menu disabled
Main menu enabled
Main menu disabled Main menu enabled Main menu disabled Main menu enabled Main menu disabled Main menu enabled Main menu disabled Main menu enabled
Description Enables the main menu. Exits the main menu. (Holding down the button more than 3 seconds to turn off the monitor. You can turn off the monitor this way at any time, including when the OsD is on.) adjusts the monitor volume level. Enters the Input features. adjusts the monitor volume level. Enters the Settings feature. Displays the information on the current input. Turns off the monitor. Displays the information on the current input. Enters the Picture Mode feature.
10
ENGLISH
Main Menu Features
Power Off
Input
Exit
Settings
Picture Mode
Main Menu Input Power Off Settings Picture Mode Exit
sets input mode. Turns off the monitor. Configures the screen settings. sets the picture mode. Exits the main menu.
Menu Settings
1 To view the OsD menu, press the joystick button at the bottom of the monitor and then enter the Settings. 2 Move the joystick up/down and left/right to set the options. 3 To return to the upper menu or set other menu items, move the joystick to or pressing ( ) it. 4 If you want to exit the OsD menu, move the joystick to until you exit.
Quick Settings
Input
NOTE
· : On · : Off
Picture
General
Description
11
ENGLISH
Quick Settings
Settings > Quick Settings Brightness Contrast Volume
adjusts the contrast and brightness of the screen. adjusts the volume level.
Description
Color Temp
NOTE · You can adjust Mute / Unmute by moving the joystick button to in the Volume menu.
Custom
The user can adjust it to red, green, or blue by customization.
Warm
sets the screen color to a reddish tone.
Medium sets the screen color to between a red and blue tone.
Cool
sets the screen color to a bluish tone.
Manual
The user can fine-tune the color temperature.
Input
Settings > Input Input List Aspect Ratio
Auto Input Switch
Description
selects the input mode.
adjusts the aspect ratio of the screen.
Full Wide
Displays the video in widescreen, regardless of the video signal input.
Original
Displays video according to the aspect ratio of the video signal input.
Cinema 1
Enlarges the screen with an aspect ratio of 21:9.
Cinema 2
Enlarges the screen with an aspect ratio of 21:9, including the black box at the bottom for subtitles.
When automatic input switch is set to On, display will automatically switch to new input when connected.
On
Enables Auto Input Switch.
Off
Disables Auto Input Switch.
12
ENGLISH
Picture
NOTE · The Picture Mode that can be set depends on the Input signal.
Settings > Picture Picture Mode
Custom Vivid HDR Effect Reader Cinema FPS RTS Color Weakness
Description allows the user to adjust each element. Heightens contrast, brightness and sharpness to display vivid images. Optimizes the screen for high dynamic range. Optimizes the screen for reading documents. You can brighten the screen in the OsD menu. Optimizes the screen to improve the visual effects of a video. This mode is optimized for FPs games. This mode is optimized for rTs Game. This mode is for users who cannot distinguish between red and green. It enables users with color weakness to easily distinguish between the two colors.
NOTE · If the picture mode is changed, the screen may flicker or the resolution of your PC screen may be affected.
SDR signal O O O O O O O O
HDR signal O O X X O O O X
13
ENGLISH
Settings > Picture Picture Adjust
Brightness Contrast Sharpness SUPER RESOLUTION+
Black Level DFC
Description
adjusts the color contrast and brightness of the screen.
adjusts the sharpness of the screen.
High
Optimizes the screen for crystal clear images. Best for high-definition video or games.
Middle
Optimizes the screen for comfortable viewing, with images at the middle level between the low and high modes. Best for uCC or sD videos.
Low
Optimizes the screen for smooth and natural images. Best for still images or images with less movement.
Off
Displays in the most common setting. Disables SUPER RESOLUTION+.
NOTE · Because this is a function to increase the sharpness of low resolution pictures, it is not recommended to use the function for normal text or for desktop icons. Doing so
may result in unnecessarily high sharpness.
sets the offset level (for HDMI only). · Offset: as a reference for a video signal, this is the darkest color the monitor can display.
High
Keeps the current contrast ratio of the screen.
Low
Lowers the black levels and raises the white levels from the current contrast ratio of the screen.
On
adjusts the brightness automatically according to the screen.
Off
Disables the DFC feature.
14
ENGLISH
Settings > Picture Game Adjust
Response Time
FreeSync
Black Stabilizer Cross Hair
Description
sets a response time for displayed pictures based on the movement of the picture on the screen. For a normal environment, it is recommended that you use Fast. When there is a lot of motion, it is recommended that you use Faster. setting to Faster may cause image sticking.
Faster
sets the response time to Faster.
Fast
sets the response time to Fast.
Normal
sets the response time to normal.
Off
Does not use the response time improvement feature.
Provides seamless and natural images by synchronizing the vertical frequency of the input signal with that of the output signal.
CAUTION
· supported Interface: HDMI · supported Graphic Card: a graphic card that supports aMD’s Freesync is necessary. · supported Version: Make sure to update the graphic card to the latest driver. · For more information and requirement, refer to aMD website at http://www.amd.com/FreeSync.
On
FreeSync function on.
Off
FreeSync function off.
You can control the black contrast to have better visibility in dark scenes. Increasing the Black Stabilizer value brightens the low gray level area on the screen. (You can easily distinguish objects on dark game screens.) reducing the Black Stabilizer value darkens the low gray level area and increases the dynamic contrast on the screen.
Cross Hair provides a mark on the center of the screen for First Person shooter (FPs) games. users can select the cross hair that fits their gaming environment among four different cross hairs. · When the monitor is off or enters energy saving mode, the Cross Hair feature is automatically turned Off.
15
ENGLISH
Settings > Picture Color Adjust
Picture Reset
Description
Gamma
Mode 1, Mode 2, The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma value, the lighter the image becomes. Mode 3
Mode 4
If you do not need to adjust the gamma settings, select Mode 4.
Color Temp
set your own color temperature.
Custom
The user can adjust it to red, green, or blue by customization.
Warm
sets the screen color to a reddish tone.
Medium
sets the screen color to between a red and blue tone.
Cool
sets the screen color to a bluish tone.
Manual
The user can fine-tune the color temperature.
Red, Green, Blue
You can customize the picture color using Red, Green, and Blue colors.
Six Color
Meets the user requirements for colors by adjusting the hue and saturation of the six colors (red, green, blue, cyan, magenta, and yellow) and then saving the settings.
Hue
adjusts the tone of the screen colors.
Saturation
adjusts the saturation of the screen colors. The lower the value, the less saturated and brighter the colors become. The higher the value, the more saturated and darker the colors become.
Do you want to reset your picture settings? Yes
returns to the default settings.
No
Cancel the select.
16
ENGLISH
General
Settings > General Language SMART ENERGY SAVING
Power LED Automatic Standby OSD Lock
Information Reset to Initial Settings
Description
sets the menu screen to the desired language.
Conserve energy by using luminance compensation algorithm.
High
saves energy using the high-efficiency SMART ENERGY SAVING feature.
Low
saves energy using the low-efficiency SMART ENERGY SAVING feature.
Off
Disables the feature.
NOTE
· The value of energy saving data may differ depending on panel and panel suppliers. · If you select the option of SMART ENERGY SAVING is High or Low, monitor luminance become lower or higher depend on source.
On
The power LED turns on.
Off
The power LED turns off.
Feature that automatically turns off the monitor when there is no movement on the screen for a period of time. You can set a timer for the auto-off function. (8H, 6H, 4H and Off)
This feature disables the configuration and adjustment of menus.
On
Enables OSD Lock.
Off
Disables OSD Lock.
NOTE · all features are disabled except Brightness, Contrast, Volume, Input, OsD Lock, Information.
The following display information will be shown; Total Power On Time, Resolution.
Do you want to reset your settings?
Yes returns to the default settings.
No
Cancel the reset.
17
ENGLISH
TROUBLESHOOTING
Nothing is displayed on the screen. Is the monitor’s power cord plugged in? Is the power LED on? Is the power on and the power LED displaying white? Is the No Signal message being displayed? Is the Out of Range message being displayed?
· Check if the power cord is correctly plugged into the power outlet. · Check the power cable connection and press the power button. · Check that the connected input is enabled (Settings > Input). · This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and reconnect it. · This occurs when signals transferred from the PC (graphics card) are out of the horizontal or vertical frequency range of the monitor. Please see the Product
specification section of this manual to set the appropriate frequency.
Screen display is unstable and shaky. / Images displayed on the monitor leave shadow trails.
Did you select the appropriate resolution?
· If the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Change the resolution to 1080p or the recommended resolution.
· not setting the graphics card to the recommended (optimal) resolution may result in blurred text, a dimmed screen, a truncated display area or misalignment of the display.
· The setting methods may be different depending on the computer or operating system, and some resolutions may not be available depending on the performance of the graphics card. If this is the case, contact the manufacturer of the computer or graphics card for assistance.
Does image sticking occur even when the monitor is turned off?
· Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention of the image. · To extend the lifetime of the monitor, use a screensaver.
are there spots on the screen?
· When using the monitor, pixilated spots (red, green, blue, white, or black) may appear on the screen. This is normal for an LCD screen. It is not an error, nor is it related to the monitor’s performance.
Some features are disabled. are some functions not available when you press the Menu button? · The OsD is locked. Disable OSD Lock in General.
18
Do you see an “Unrecognized monitor, Plug and Play (VESA DDC) monitor found” message?
Have you installed the display driver?
· Be sure to install the display driver from our web site: http://www.lg.com. · Make sure to check if the graphics card supports Plug and Play function.
No sound from the headphone port. are images displayed without sound?
· Make sure that the headphone port connections are made properly. · Try increasing the volume with the joystick. · set the audio output of the PC to the monitor you are using. (The settings may differ depending on the operating system (Os) you use.)
ENGLISH
19
ENGLISH
PRODUCT SPECIFICATION
29WP500 Color Depth Resolution Power Sources
AC/DC Adapter
8-bit / 10-bit color is supported.
Max resolution
2560 x 1080 @ 75 Hz
recommended resolution
2560 x 1080 @ 60 Hz
Power rating
19 V 1.3 a
Power Consumption
On mode: 16 W Typ. (EnErGY sTar® standard)* sleep Mode (standby Mode) 0.5 W ** Off Mode 0.3 W
aDs-25sFa-19-3 19025E, manufactured by sHEnZHEn HOnOr ELECTrOnIC Or aDs-25FsF-19 19025EPCu-1, manufactured by sHEnZHEn HOnOr ELECTrOnIC Or aDs-25FsF-19 19025EPBr-1, manufactured by sHEnZHEn HOnOr ELECTrOnIC Or aDs-25FsF-19 19025EPI-1, manufactured by sHEnZHEn HOnOr ELECTrOnIC Or aDs-25FsF-19 19025EPG-1, manufactured by sHEnZHEn HOnOr ELECTrOnIC Or aDs-25FsF-19 19025EPB-1, manufactured by sHEnZHEn HOnOr ELECTrOnIC Or LCaP21a, manufactured by LIEn CHanG ELECTrOnIC EnTErPrIsE Or LCaP26-a, manufactured by LIEn CHanG ELECTrOnIC EnTErPrIsE Or LCaP26-E, manufactured by LIEn CHanG ELECTrOnIC EnTErPrIsE Or LCaP26-I, manufactured by LIEn CHanG ELECTrOnIC EnTErPrIsE Or LCaP26-B, manufactured by LIEn CHanG ELECTrOnIC EnTErPrIsE Or aD10560LF, manufactured by PI Electronics (H.K.) Ltd. Or aD2139s20, manufactured by PI Electronics (H.K.) Ltd. Or aD2139620, manufactured by PI Electronics (H.K.) Ltd. Output: 19 V 1.3 a
20
ENGLISH
Environmental Conditions
Operating Conditions
Temperature
storing Conditions
Humidity Temperature Humidity
Dimensions
Monitor size (Width x Height x Depth)
With stand (mm)
688.5 x 405.0 x 223.8
Without stand (mm)
688.5 x 313.4 x 76.9
Weight (Without Packaging) With stand (kg)
4.5
Without stand (kg)
4.0
The specifications are subject to change without notice. The ~ symbol means alternating current, and the symbol means direct current. The power consumption level can be different by operating condition and monitor setting. * The On mode power consumption is measured with EnErGY sTar® test standard. ** The monitor goes to the sleep Mode in a couple of minutes(Max 5 minutes).
0 °C to 40 °C Less than 80 % -20 °C to 60 °C Less than 85 %
21
PRODUCT SPECIFICATION
ENGLISH
34WP500 34WP550 Color Depth Resolution Power Sources AC/DC Adapter
Environmental Conditions
8-bit / 10-bit color is supported.
Max resolution
2560 x 1080 @ 75 Hz
recommended resolution
2560 x 1080 @ 60 Hz
Power rating
19 V 2.0 a
Power Consumption
On mode: 23 W Typ. (EnErGY sTar® standard)* sleep Mode (standby Mode) 0.5 W ** Off Mode 0.3 W
ADS-45SN-19-3 19040G, manufactured by SHENZHEN HONOR ELECTRONIC Or ADS-45SQ-19-3 19040E, manufactured by SHENZHEN HONOR ELECTRONIC Or ADS-45FSQ-19 19040EPG-1, manufactured by SHENZHEN HONOR ELECTRONIC Or ADS-45FSQ-19 19040EPK-1, manufactured by SHENZHEN HONOR ELECTRONIC Or ADS-45FSQ-19 19040EPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC Or ADS-45FSQ-19 19040EPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC Or LCAP21C, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE Or LCAP26B-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE Or LCAP26B-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE Or AD10530LF, manufactured by PI Electronics (H.K.) Ltd. Or AD2137S20, manufactured by PI Electronics (H.K.) Ltd. Or AD2137620, manufactured by PI Electronics (H.K.) Ltd. Output: 19 V 2.1 A
Operating Conditions
Temperature
Humidity
Storing Conditions
Temperature
Humidity
0 °C to 40 °C Less than 80 % -20 °C to 60 °C Less than 85 %
22
ENGLISH
Dimensions
Monitor size (Width x Height x Depth) With stand (mm) Without stand (mm)
Weight (Without Packaging) With stand (kg)
Without stand (kg)
The specifications are subject to change without notice. The ~ symbol means alternating current, and the symbol means direct current. The power consumption level can be different by operating condition and monitor setting. * The On mode power consumption is measured with EnErGY sTar® test standard. ** The monitor goes to the sleep Mode in a couple of minutes(Max 5 minutes).
34WP500
816.7 x 483.8 x 223.3 816.7 x 364.9 x 65.3 5.9 4.9
34WP550
816.7 x 568.3 x 260.0 816.7 x 364.9 x 65.3 6.8 4.9
23
ENGLISH
Factory Support Mode (Preset Mode, PC)
HDMI
Resolution
640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1280 x 720 1280 x 1024 1280 x 1024 1600 x 900 1680 x 1050 1920 x 1080 2560 x 1080 2560 x 1080 2560 x 1440
Horizontal Frequency (kHz)
31.469 37.5 37.879 46.875 48.363 60.123 53.697 45 63.981 79.976 60 65.29 67.5 66.636 83.915 88.86
Vertical Frequency (Hz)
59.94 75 60.317 75 60 75.029 60 60 60.02 75.025 60 59.954 60 59.98 74.99 59.95
Polarity (H/V)
-/-/+/+ +/+ -/+/+ -/+ +/+ +/+ +/+ +/+ -/+ +/-/+ -/+ -/+
24
Remarks
recommend Mode Only for XBOX
ENGLISH
HDMI Timing (Video)
Factory support mode (Preset Mode) 480p 576P 720p 720p 1080p 1080p 2160p
Horizontal Frequency (kHz)
31.5 31.25 37.5 45.0 56.25 67.5 67.5
Vertical Frequency (Hz)
60 50 50 60 50 60 30
Power LED
Mode On Mode sleep Mode (standby Mode) Off Mode
LED Color White (For a few seconds)
Off Off
Remarks
25
The model and serial number of the product are located on the back and on one side of the product. record them below in case you ever need service.
Model serial no.
This Product qualifies for EnErGY sTar®
Changing the factory default configuration and settings or enabling certain optional features and functionalities may increase energy consumption beyond the limits required for EnErGY
sTar® certification. refer to EnErGYsTar.gov for more information on the EnErGY sTar® program.
Documents / Resources
 |
LG LED Monitor applies LCD screen with LED backlights [pdf] Owner's Manual LG, LED Monitor, applies, LCD screen, LED backlights, 29WP500, 34WP500, 34WP550 |
References
-
Homepage | ENERGY STAR
-
AMD FreeSync™ Technology
-
Computer Products & Accessories: Locks & Docks | Kensington
-
LG Electronics & Home Appliances | Shop Now | LG USA
- User Manual
