SAMSUNG WMN5870TC-ZA Angle Adjustment and Rotation Type Wall Mount Bracket Installation Guide

Do not hang on or give sudden impacts to the product.

1. Keep children away from the wall mount bracket. Children can be seriously injured if they hit their heads on an edge of the bracket.
2. Be careful when you adjust the angle or rotate the bracket. You can damage the bracket or the TV if the bracket or TV strikes the wall.
   (Attach sponges to 4 corners of the bracket to prevent damage to the bracket or the wall.)
3. Do not install the bracket in a location with high temperature and high humidity. Do not install the bracket on a wall that cannot bear the weight of the bracket and TV.
4. Since there is a danger of electric shock, do not insert your fingers into the TV stand installation hole while installing the wall bracket.
5. Make sure to cover the TV stand installation hole with the hole cover supplied with the TV before completing the wall installation.

 Wall Bracket Assembly

1. Install the angle adjustment bracket on the wall as shown in the figure. Make sure the word “Top” on the pull out section of the angle adjustment bracket is facing up. Use a carpenters level to make sure the bracket is level.
   
   Tighten the angle adjustment bracket by using anchors and screws ®. Insert and tighten the screws in order from ➀ to ➈ ·
   If the wall in your initial installation location is not solid enough to install the bracket, install it in nearby location where the wall is strong enough.
   How to Install the Supplied Anchors and Tighten the Supplied Screws.
   Concrete wall
    Use the angle adjustment bracket as a template to mark the screw hole locations.
   Make a hole in the wall with a 9 mm x 70  mm (11 /32 inch x 2.5 inch) drill bit at one of the marked locations.
    Clean out the hole.
     Insert the supplied anchor into the hole. Match the holes on the angle adjustment bracket to the holes on the wall. Insert and then tighten the screws.
    Use a drill bit of the required size. Be sure to follow the installation instructions to avoid safety problems.
    Check the solidity of the wall before installation. Strengthen the wall if necessary. Do not install the bracket on a wall that is not strong enough.
   The supplied screws and anchors are for installing on concrete walls.
   For plaster, marble, or steel walls, use the appropriate screws and anchors.
2. Securely fix the angle adjustment bracket to the wall. Then, pull the angle adjustment bracket forward and unfold it.
   Insert the left bracket onto the angle adjustment bracket as shown in the diagram below, and then tighten with the supplied screws ⓑ .
   Repeat the same process with the right bracket.
   
3. Remove the screws from the main body of the TV, assemble the 4 enclosed plastic hangers and screws © as shown in the figure, and then fasten them to the back of the main body of the TV.
   
   
   When you mount the the TV on the wall bracket, be sure to check the left and right side to ensure it is properly attached to the brackets.
   Be careful when installing the TV or adjusting the angle as fingers can be caught in the holes.
   Be sure the wall bracket is securely fixed to the wall. If the TV falls, it can cause physical damage or injury.
4. Pull out the wall-mount bracket assembly to the front as shown. With two people holding the TV, one on either side, lift up the TV and hang it on the bracket assembly.
   Do not touch or push the LCD screen. Hold the TV by its frame.
   Do not push at the corners of the TV.
   
   
   
    After you have installed the TV on the wall bracket, rotate the safety pins on the upper part of each bracket to fix the TV to the wall mount.
5. To manage the power cord and other cables from peripheral equipments, bundle the wires by using the supplied wire fixing tool. Be sure the wires are not unbundled or do not come off when you rotate or operate the TV.
    Insert the cables, and then pull the angle adjustment bracket forward.
   Arrange the wires in the hole formed by the wire fixing tool so they won’t interfere with the TV when you rotate it. Check the operation 2 ~ 3 times to ensure it works properly.
   

 Wall Bracket Angle Adjustment

The smooth moving mechanism built into the wall bracket lets you adjust the angle of your TV smoothly and easily.

• Do not use excessive force to adjust the angle of the TV. It should move easily.
• Do not angle the TV so that it’s edges are close to the wall. You can damage the bracket or the TV if the bracket or TV strikes the wall.
• Hold the left and right side of the TV when you want to adjust the left and right angle. Avoid touching the screen.
• Hold the top center to adjust the down angle. I You can adjust the angle of the TV up, down, left, and right between -20° – 20°.
   The adjustable angle range may be vary depending on the model.
  

 Product Specifications [mm(inch)]

 Product Standards

 Information in this document is subject to change without notice.

LIMITIED WARRANTY TO ORIGINAL PURCHASER

WARRANTY

This Samsung product Is warranted for the period of twelve (12) months from the original date of purchase, against defective materials and workmanship. In the event that warranty service Is required within the first month of ownership, return the product to the retailer from whom it was purchased. After that period, Samsung Call Center will comply with this warranty during the Warranty Period. To obtain details, please contact Samsung Call Center.

NOTICE: REGARDING WARRANTY FOR SAMSUNG ACCESSORIES FOR AUSTRALIA ANO NEW ZEALAND ONLY.

• The warranty for the Samsung Accessory contemned in this User Manual Is not applicable for Australia and New Zealand. Please refer to the separate warranty card within the box for AUSTRALIA AND NEW ZEAtAND warranty information.