K197.001.004.001 grandoh Nest Swing
Instruction Manual
CONFORM EN71-1,2,3,8
K197.001.004.001 grandoh Nest Swing
WARNING! For family domestic use only. Not suitable for children under 3 years. To be used under the direct supervision of an adult. Long cord, risk of strangulation! Risk of falling!
INSTRUCTIONS FOR USE
SAFETY INSTRUCTIONS
- Please keep this instruction sheet safely for future reference.
- Please do not modify the product or the assembly details in any way. Modifications will affect the structural integrity and replacement parts will be at the buyer’s expense. Inappropriate use or faulty application of the product are explicitly forbidden and absolve the manufacturer of all liability. This product needs to be mounted by an adult before use.
- The use of the item is allowed only under continuous supervision by an adult. The product can bear a maximum load of 150 kg. The product is not suitable for children under 36 months, due to a lack of extra safety precautions and taking into account the limited mental capacities of toddlers.
- This product meets all security aspects of the European standard EN71-1, EN71-2, EN71-3 and EN 71-8. It is only suitable for family domestic use, both indoors and outdoors.
- When installing the product, ensure that the play system or other construction can support the weight (minimum 200 kg) and that there is no risk of entrapment.
- The product should be at a distance of at least 2 m from all other installations e.g. fences, branches, clothes-line, …
- In this safety area no hard, angular or pointed objects should be present. The surface underneath the product should be flat and shockabsorbing. The product must not be placed on asphalt, concrete or any other hard surface. We advise the removal and storage of all accessories during the winter because the characteristics of the soil (when frozen) are not suitable for safe play.
- The distance between the suspension points along the crossbeam equals or is more than the distance between the junction points of the product, plus 4% of the distance between the ground and beam. See FIG I.
- The minimum distance from the bottom of the swing seat to the ground surface shall not be less than 35 cm. The minimum lateral free space should be 45 cm.
- Specific instructions for adjusting the ropelength : see FIG II. Ensure that the product hangs horizontal after adjustment of the ropes.
- Please ensure that the crossbeam is never higher than 2.5 m. Please make sure that children do not climb the product to reach the top beam.
- To avoid that the swing is heating up, do not place it facing the sun. In warm weather, check that the seating surface is not too hot.
- All pieces should be checked regularly. For replacement material and expansion of the playground equipment, please contact the supplier. Consequently safety will be guaranteed.
- This product can only be used in combination with sufficiently strong swing hooks with a nylon bearing. Only in this case the safety can be ensured. It is explicitly forbidden to use the metal rings on a suspension system without a hinged element.
INSPECTION AND MAINTENANCE
The frequency of inspection and maintenance will vary with the type of equipment or materials used or other factors (e.g. heavy use, levels of vandalism, coastal location, air pollution, age of equipment, …).
Special attention should be given to the swing hooks, rings, eights, plastic welds and ropes. Moving metal parts must be oiled regularly.
Routine visual inspection (weekly to monthly)
- Always check that the bolts and nuts are securely fastened.
- Check the shock absorbing surface for objects that don’t belong there.
- Check for missing parts.
- Check the equipment ground clearances.
Operational inspection (1 to 3 months)
- Check the stability of the construction.
- Check every part for excessive wear and replace when necessary.
Annual inspection (1 to 2 times per year)
- Check for rust and corrosion.
- Check every part for excessive wear and replace when necessary.
ASSEMBLY 
PART LIST
- Take all parts out of the packaging and check if anything is damaged, and if all parts are present.
A: Sail
B: Curved tubes
C: Straight tubes
D: Rope with ring and welds
E: Spanner
Assembly steps
- Slide the curved tubes, together with the shock absorbing foam, into the rounded ends of the sail. Please note that the bends in these tubes point upwards.
- Slide two straight tubes in one another, make sure the snap connection closes properly. Repeat this twice.
- Slide the assembled straight tubes, with shock absorbing foam, in the sail.
- Push the end of the straight tubes in the larger ends of the curved tubes. Repeat this four times.
- Push the eyebolts through the matching holes in the tubes. Use the wrench to tighten the nuts onto the eyebolts. Close the flaps using the Velcro strip.
Don’t remove the shock absorbing foam.
A distance between the suspension points along the crossbeam.
B distance between the junction points of the swing element and the means of suspension.
h distance from the ground to the lower side of the crossbeam.
assembly of the ropes
Warning! risk of falling
Documents / Resources
 |
KBT K197.001.004.001 grandoh Nest Swing [pdf] Instruction Manual K197.001.004.001, grandoh Nest Swing, K197.001.004.001 grandoh Nest Swing, Nest Swing, Swing |
