Hannspree

Hannspree Hanns.G HE 225 DPB Monitor

Hannspree-Hanns-G-HE-225-DPB-Monitor-Imgg

Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference.

FCC Class B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device complies with Parts 15 of the FCC Rule. Operation is subject to the following two conditions﹕ (1) this device may not cause harmful interference﹔ and (2) this device must accept any interference received, including interference that may cause undesired operations.

CANADA
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulation.
【Optional, depending on selected model】

This device complies with the requirements of EMC directive 2004/108/EC with regard to Electromagnetic Compatibility, 2006/95/EC, and 93/68/EEC with regard to the Low Voltage directive.
【Optional, depending on selected model】
The socket outlet shall be near the equipment and shall be accessible.

RECYCLING INFORMATION
We, the Hanns. G cares very much about our environmental protection strategy and firmly believes that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end of life.
These devices contain recyclable materials, which can be re-decomposed and re-integrated into brand-new marvels. On the contrary, other materials can be classified as hazardous and poisoned substances. We strongly encourage you to contact the provided information to recycle this product.

For more information, please visit
www.hannsg.com 

SAFETY NOTICE 

  1. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
  2. Shielded interface cables and AC power cords, if any, must be used in order to comply with the emission limits.
  3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibility of the user to correct such interference.
  4. Only use attachments/accesories specified by the manufacturer.

WARNING
To prevent fire or shock hazards, do not expose the monitor to rain or moisture. Dangerously high voltages are present inside the monitor. Do not open the cabinet. Refer servicing to qualified personnel only.

PRECAUTIONS

  • Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool, or in a wet basement.
  • Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.
  • Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure the reliable operation of the monitor and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the monitor on a bed, sofa, rug, or similar surface. Do not place the monitor near or over a radiator or heat register. Do not place the monitor in a bookcase or cabinet unless proper ventilation is provided.
  • The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
  • Unplug the unit during a lightning storm or when it will not be used for a long period of time. This will protect the monitor from damage due to power surges.
  • Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
  • Never push any object into the slot on the monitor cabinet. It could short-circuit parts causing a fire or electric shock. Never spill liquids on the monitor.
  • Do not attempt to service the monitor by yourself; opening or removing covers can expose you to dangerous voltages and other hazards. Please refer all servicing to qualified service personnel.
  • The wall socket shall be installed near the equipment and shall be easily accessible.

SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with an LCD monitor and do not indicate a problem.

  • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears.
  • You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
  • The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or less such as a missing pixel or a pixel lit all of the time.
  • Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours. In this case, the screen is recovered slowly by changing the image or turning off the Power Switch for hours.
  • If the screen suddenly flashes erratically or the backlighting fails, please contact your dealer or service center for repair. Do not attempt to repair the monitor yourself.

BEFORE YOU OPERATE THE MONITOR  

FEATURES

Hannspree-Hanns-G-HE-225-DPB-Monitor-Fig-1

  • Crisp, Clear Display for Windows
  • EPA ENERGY STAR®【Optional, depend on selected model】
  • GP Green Product
  • Ergonomic Design
  • Space Saving, Compact Case Design

CHECKING THE CONTENTS OF THE PACKAGE
The product package should include the following items:

LCD Monitor

Hannspree-Hanns-G-HE-225-DPB-Monitor-Fig-2

Cables and User manual 

Hannspree-Hanns-G-HE-225-DPB-Monitor-Fig-3

INSTALLATION INSTRUCTIONS

Hannspree-Hanns-G-HE-225-DPB-Monitor-Fig-4

INSTALLATION

  1. Turn the monitor over and set it upside down.
  2. Attach the foot stand to the monitor column (Figure 1).
  3. Rotate the stand as shown in the illustration (Figure 2) until a ‘click’ is heard.

REMOVAL

  1. Turn the monitor over and set it upside down.
  2. Use a tool to push the “a” point to unlock the foot stand, then rotate the stand as shown in the illustration (Figure 1).
  3. Detach the stand from the monitor(Figure 2).

POWER

POWER SOURCE:

  1. Make sure that the power cord is the correct type required in your area.
  2. This LCD monitor has an Internal universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.)
  3. Connect the AC-power cord on one end to your LCD monitor’s AC-input socket, and the other end to the wall-outlet.

SETTING THE MONITOR ON THE WALL
DISSEMBLING THE STAND BASE:

  1. Disconnect all the cables and cords from the Monitor to prevent breakage.
  2. Carefully place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the Monitor.
  3. Remove the 3 screws so that the stand base can be removed.
  4. Gently remove the stand base.

Hannspree-Hanns-G-HE-225-DPB-Monitor-Fig-5

WALL MOUNTING THE MONITOR

Hannspree-Hanns-G-HE-225-DPB-Monitor-Fig-6

  1. Purchase a VESA compatible wall bracket: VESA 100×100, 4 holes, M4, 8mm, 8kg.
  2. Locate your ideal Monitor position on the wall.
  3. Fix the wall bracket firmly on the wall.
  4. Secure the Monitor to the bracket using the 4 mount holes on the back and center of the Monitor.

Note

  • Please read the instructions of your specific wall bracket to properly wall mounts the Monitor.
  • The pitch of the mounting holes is 100mm horizontally and 100mm vertically.
  • The screw type required is metric: M4, 8mm length.
  • The Monitor stand base can be screwed on a table or a hard surface using the hole on the back of the stand base.
  • For use only with UL-listed wall mount bracket.

Installing the LCD Monitor requires special skills that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. Hanns.G bears no responsibility for improper mounting or mounting that results in accident or injury. You can ask qualified service personnel about using an optional bracket to mount the Monitor to the wall.

MAKING CONNECTIONS

CONNECTING TO A PC
Turn off your computer before performing the procedure below.

  1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer’s VGA port.
  2. Connect one end of the DVI cable (optional) to the back of the monitor and connect the other end to the computer’s DVI port.
  3. Connect the audio cable between the monitor’s audio input and the PC’s audio output (green port).
  4. Plug one end of the AC power cord to the LCD monitor’s AC input socket, and the other end to the Wall outlet.
  5. Turn on your monitor and computer.

Hannspree-Hanns-G-HE-225-DPB-Monitor-Fig-7

ADJUSTING THE VIEWING ANGLE 

  • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference.
  • Hold the stand so you do not topple the monitor when you change the monitor’s angle.
  • You are able to adjust the monitor’s angle from -3° to 17°.

Hannspree-Hanns-G-HE-225-DPB-Monitor-Fig-8

NOTES

  • Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.
  • Be careful not to place fingers or hands near the hinges when tilting the monitor, otherwise pinching can result.

OPERATING INSTRUCTIONS

GENERAL INSTRUCTIONS
Press the power button to turn the monitor on or off. The other control buttons are located on the front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences.

  • The power cord should be connected.
  • Connect the Signal cable from the monitor to the VGA card.
  • Press the power button to turn on the monitor. The power indicator will light up.

Hannspree-Hanns-G-HE-225-DPB-Monitor-Fig-9

FRONT PANEL CONTROL

  • Power Button:
    Press this button to switch ON/OFF of the monitor’s power.
  • Power Indicator:
    Green — Power On mode.
    Orange — Power Saving mode.
  • MENU / Return:
    Turn the OSD menu on/off or return to the previous menu.
  • Adjust ▲▼: [The availability of this function depends upon the selected model] 1. Adjust Brightness and volume when the OSD is off.
    2. Navigate through adjustment icons when OSD is ON or adjust a function when the function is activated.
  • 【 i 】Button: 《Analog Input Models》
    1. The OSD menu is used as《confirmation》function during start-up.
    2. The 「Auto adjustment」 function works only for VGA input. (The auto adjustment function is used to optimize the 「horizontal position」, 「vertical position」,「clock」,and 「phase」.)
  • 【 i 】Button: 《Digital Input Models》
    1. Press【 i 】to enter Source selections. (Selections include VGA, DVI, etc. The actual selections may vary depending on the models. This function is only available in models with digital inputs)
    2. The OSD menu is used as《confirmation》function during start-up.
    3. Press and hold this button for more than 3 seconds will start 「Auto Adjust」 function when using VGA input only. (The auto adjustment function is used to optimize the 「horizontal position」,「vertical position」,「clock」, and 「phase」.)

Hotkeys

  1. Restore Brightness and Contrast defaults:
    To reset both the Brightness and Contrast to their default values, press the 【▲】and 【▼】 keys at the same time.
  2. ASPECT RATIO:
    Press【MENU】+【▼】key to change to 「FULL MODE」 or 「FIT MODE」.
  3. Change Resolution:
    For similar screen display resolutions (see table below), the screen resolution can be changed by pressing the【MENU】+【▲】button to achieve the optimal display quality.
  4. Change Preset Mode: [The availability of this function depends upon the selected model] Press【MENU】key for 3 seconds to select one of the following modes「PC」,「MOVIE」,「GAME」,「ECO」. Default is「PC」.

Hannspree-Hanns-G-HE-225-DPB-Monitor-Fig-10

NOTES

  • Do not install the monitor in a location near heat sources such as radiators or air dust, or in a place subject to direct sunlight, excessive dust, or mechanical vibration or shock.
  • Save the original shipping box and packing materials, as they will come in handy if you ever have to ship your monitor.
  • For maximum protection, repackage your monitor as it was originally packed at the factory.
  • To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before cleaning it.

HOW TO ADJUST A SETTINGS

Hannspree-Hanns-G-HE-225-DPB-Monitor-Fig-11

Hannspree-Hanns-G-HE-225-DPB-Monitor-Fig-12

Hannspree-Hanns-G-HE-225-DPB-Monitor-Fig-13

PLUG AND PLAY

Plug & Play DDC2B Feature
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bidirectional data channel based on the I²C protocol. The host can request EDID information over the DDC2B channel.

THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL.

TECHNICAL SUPPORT (FAQ)

Q & A FOR GENERAL PROBLEMS

Hannspree-Hanns-G-HE-225-DPB-Monitor-Fig-14

Hannspree-Hanns-G-HE-225-DPB-Monitor-Fig-15

Addendum related to Windows 7
When you encounter display problem under Windows 7, you need to do the following:

  1. Make sure your PC computer (Hardware requirement) can support Windows 7.
  2. Make sure your video card can run Windows 7.
  3. If your video card can support Windows 7, need to install the latest Win 7 driver of your video card.

Suggest to do the following

  1. Install the latest Windows 7 video driver of your video card.
  2. Try to use the recommended display resolution that is supported by the monitor.
  3. If the recommended display resolution is not working, try the second recommended display resolution.

Hannspree-Hanns-G-HE-225-DPB-Monitor-Fig-16

And if you still have display problem after doing the above procedure, please visit Hanns.G support and Service Website: http://www.hannsg.com 

Windows is a registered trademark of Microsoft Corporation.

ERROR MESSAGE & POSSIBLE SOLUTIONS 

CABLE NOT CONNECTED

  1. Check that the signal-cable is properly connected, if the connector is loose, tighten the connector’s screws.
  2. Check the signal-cable’s connection pins for damage.

INPUT NOT SUPPORT
Your computer has been set to unsuitable display mode, set the computer to display mode given in the following table.

FACTORY PRESET TIMING TABLE

Hannspree-Hanns-G-HE-225-DPB-Monitor-Fig-17

Hannspree-Hanns-G-HE-225-DPB-Monitor-Fig-18

(Video mode) 

Hannspree-Hanns-G-HE-225-DPB-Monitor-Fig-19

We ensure that the monitor can be lighted under interlace signal mode, but we can not guarantee the image quality.

APPENDIX

SPECIFICATIONS HE195

Hannspree-Hanns-G-HE-225-DPB-Monitor-Fig-20

The above specification is subject to actual product specification and is subject to change without prior notice.

NOTES
The Maximum Resolution will depend on the display card support. Related issues can refer to the www.hannsg.com FAQ section.

SPECIFICATIONS

HE196

Hannspree-Hanns-G-HE-225-DPB-Monitor-Fig-21

The above specification is subject to actual product specification and is subject to change without prior notice.

NOTES
The Maximum Resolution will depend on the display card support. Related issues can refer to the www.hannsg.com FAQ section.

SPECIFICATIONS

HE225

Hannspree-Hanns-G-HE-225-DPB-Monitor-Fig-21

The above specification is subject to actual product specification and is subject to change without prior notice.

NOTES
The Maximum Resolution will depend on the display card support. A related issue can refer to the www.hannsg.com FAQ section.

Frequently Asked Questions

What is the screen size of the Hannspree Hanns.G HE 225 DPB monitor?

The Hannspree Hanns.G HE 225 DPB monitor has a screen size of 21.5 inches.

What is the resolution of the Hannspree Hanns.G HE 225 DPB monitor?

The monitor offers a Full HD resolution of 1920 x 1080 pixels.

What is the aspect ratio of the Hannspree Hanns.G HE 225 DPB monitor?

The aspect ratio of the Hannspree Hanns.G HE 225 DPB monitor is 16:9, which is the standard widescreen aspect ratio.

Does the Hannspree Hanns.G HE 225 DPB monitor have built-in speakers?

No, the Hannspree Hanns.G HE 225 DPB monitor does not have built-in speakers. You would need to use external speakers or headphones for audio output.

What are the available ports on the Hannspree Hanns.G HE 225 DPB monitor?

The monitor typically includes VGA and DVI inputs for video connectivity. It might also have an audio input for connecting external speakers or headphones.

Does the Hannspree Hanns.G HE 225 DPB monitor support VESA mounting?

Yes, the Hannspree Hanns. G HE 225 DPB monitor is usually VESA mount compatible, allowing you to mount it on a compatible stand or arm.

Is the monitor adjustable in terms of tilt or height?

The Hannspree Hanns.G HE 225 DPB monitor usually provides tilt adjustment, allowing you to tilt the screen forward or backward for a better viewing angle. However, it may not offer height adjustment.

Download PDF Link: Hannspree-Hanns-G-HE-225-DPB-Monitor

References

Leave a comment

Your email address will not be published. Required fields are marked *