FIBERBUILT LogoPLAYER PREFERRED SERIES STUDIO MAT
SINGLE-HITTING – 8’X4′

PPS-8X4-760-SH

PARTS & ASSEMBLY

FIBERBUILT PPS 8X4 Studio Golf Mat Single HittingPlease check your box for accuracy.
All of these pieces should be included.

ITEM  PART NUMBER QTY.
A TLCM-C-2 4
B TLCM-E-2 2
C TLCM-P-2 4
D TLCM-P-4 1
E TLCM-PINS50 1 Bag
F 651-BLACK 2
G 760-2X4-PPS 1
H 760-4X4-PPS 1
I PPS-PANEL-2X4 1

RUBBER BASE FIBERBUILT PPS 8X4 Studio Golf Mat Single Hitting - RUBBER BASEHARDWARE FIBERBUILT PPS 8X4 Studio Golf Mat Single Hitting - HARDWAREGRASS PANELS
FIBERBUILT PPS 8X4 Studio Golf Mat Single Hitting - GRASS PANELS

  1. Ensure the ground is properly prepared for placement of the rubber base. The surface should be firm, packed and level.
    Concrete, asphalt, patios or decking are ideal. (Do not place on grass.)
    Place the rubber base pieces (A, B) and Pure Impact Turf panel (I) on the ground together as shown.FIBERBUILT PPS 8X4 Studio Golf Mat Single Hitting - Figure 1
  2. Insert the tee holder (F) into the underside of the desired tee location on the Pure Impact Turf panel (I).

    ASSEMBLY INSTRUCTIONS

    FIBERBUILT PPS 8X4 Studio Golf Mat Single Hitting - Figure 2

  3. Secure rubber base pieces (A, B) and Pure Impact Turf (I) together by pushing Connectors into adjacent holes in the sections.FIBERBUILT PPS 8X4 Studio Golf Mat Single Hitting - Figure 3Optional Step: For increased security and stability, install and secure Connectors with pins from underneath as you assemble the base pieces. (If the mat will be regularly moved or disassembled, we recommend skipping the use of the pins.)
    Steps for securing the pins:
    • As you set base pieces next to each other, lift up the corners of the rubber base pieces and place a plastic push pin (E) into the holes from underneath.
    • From the top, push the rubber 2-pin (C) or 4-pin (D) Connectors into position, guiding them onto the plastic push pins.
    • Gently tap with a hammer until the connectors are flush with the base surface.FIBERBUILT PPS 8X4 Studio Golf Mat Single Hitting - Figure 4
  4. Lay the Spacer Turf (G) and Stance Turf (H) on top of the base areas that fit their sizes.FIBERBUILT PPS 8X4 Studio Golf Mat Single Hitting - Figure 5

NOTE: We ship our turf folded in the box for the most expedient shipping. During transit, the turf pieces may curl slightly. If your turf is curled upon delivery, we recommend laying the turf pieces flat in the sun for a couple of hours to allow them to relax and flatten prior to laying them down on the base.

FINISHED PRODUCT

FIBERBUILT PPS 8X4 Studio Golf Mat Single Hitting - Figure 6

DOUBLE THE LIFE OF YOUR WARRANTY TODAY FOR FREE
For a free one-year extension to our standard warranty, exclusive access to insider deals, new product information and much more, register your mat today at: FiberbuiltGolf.com/register
Be sure to select the following:
PLAYER PREFERED SERIES STUDIO MAT SINGLE-HITTING – 8’x4′
SKU#: PPS-8X4-760-SH

FIBERBUILT PPS 8X4 Studio Golf Mat Single Hitting - Logo 1FiberbuiltGolf.com
833.328.3218

Documents / Resources

FIBERBUILT PPS-8X4 Studio Golf Mat Single Hitting [pdf] Instructions
PPS-8X4 Studio Golf Mat Single Hitting, PPS-8X4, Studio Golf Mat Single Hitting, Golf Mat Single Hitting, Mat Single Hitting, Single, Hitting

References

Leave a comment

Your email address will not be published. Required fields are marked *