IPWFBW Miscellaneous Door Entry Accessories
Specifications
- LAN Port 1 Speed: 10Mbs / 100Mbs
- LAN Port 2 Speed: 10Mbs / 100Mbs
- Frequency: 5.8Ghz
- Wireless Data Speed: 450Mbps
- Wireless Standard: IEEE802.11AC/A
- PoE Voltage: 48V 12V Input Option
- Max Tx Distance: 700m (Recommend 350m)
- Easy Pair Technology: Yes
- Support 1 – 1: Yes
- Support 1 – Many: Yes
- Modes: Access Point / Repeater
- Mounting: Wall Or Pole (Not Supplied)
- Dimensions: 165 x 88 x 56mm
Product Usage Instructions
Powering Options
There are two options to power the IPWFBW:
- Power from 12V DC: Connect a 12V DC power source via the 2.1mm DC Socket. Ensure correct polarity when making connections. Current consumption is 300mA.
- Power from 48V PoE: Power the device using a 48V PoE source through the RJ45 WAN/POE Socket.
Standard WiFi Bridge Setup:
To set up the WiFi bridge, follow these steps:
- Pairing: Set one IPmitter to ‘Host’ (H) and the other to ‘Client’ (C) on the same channel number.
- Press the Function (F) button and change settings from H to C by using the Setting (S) button.
- The display will flash to indicate settings have been saved. Press the Reset (RST) button for 1 second on both devices to pair them. Pairing may take up to 2 minutes.
- The strength indicator ranges from P-01 (Good) to P-75 (Poor). If P-95 is displayed, the devices have not paired successfully.
- To add more clients, set the channel on the new client device, and press reset buttons on both the new client and the Host.
INSTRCUTION
The IPWFBW can be used to “bridge” an IP connection for IP cameras or other IP devices wireless between two points, devices connect via the RJ45 port on the IPWFBW.
Powering
- Option 1 – Power from 12V DC (via the 2.1mm DC Socket), the current consumption is 300mA. The IPWFBW is polarity sensitive so connections must be made correctly.
- Option 2 – Power the camera using 48V PoE, in the RJ45 WAN/POE Socket
The IPWFBW will take approximately 1 minute to boot up.
Standard WiFi Bridge Setup
Available Channels – Available channels 34-64, 100-140 (In multiples of 4)
The IPmitters are sent out as default on H (Host), and need pairing up before installing. One IPmitter needs to be set to H (Host) and the other to C (Client), they both have to be set to the same channel number.
Example – Pairing
- Press the F (function) button and “H” will flash. Press the S (setting) button to change to “C”
- Press the F button 4 times to move across the display, then the whole display will flash for about 5 seconds to indicate the settings have been saved.
- Now press the RST (reset) button for 1 second on both IPmitters. The display will change to a P with a rotating segment whilst pairing and will show P and a value once paired. Pairing can take up to 2 minutes.
The strength will range from P-01 (Good) to P-75 (Poor). If P-95 shows then the IPWFBW have not paired.
To add more clients (up to 4) to one host then set the channel on the new client and press the reset buttons on the new client and the Host.
Specifications
- LAN Port 1 Speed 10Mbs / 100Mbs
- LAN Port 2 Speed 10Mbs / 100Mbs
- Frequency 5.8Ghz
- Wireless Data Speed 450Mbps
- Wireless Standard IEEE802.11AC/A
- PoE Voltage 48V
- 12V Input Option Yes
- Max Tx Distance 700m (Recommend 350m)
- Easy Pair Technology Yes
- Support 1 – 1 Yes
- Support 1 – Many Yes
- Modes Access Point / Repeater
- Mounting Wall Or Pole (Not Supplied)
- Dimensions 165 x 88 x 56mm
Quick Start Guide
This symbol indicates that equipment must not be mixed with general household waste. For treatment, recovery and recycling please return to your local designated WEE/CG0783SS collection point as defined by your local council.
FAQ
- Q: How do I know if the IPWFBW is powered on?
- A: The IPWFBW will take approximately 1 minute to boot up after powering on. You can also check for LED indicators on the device.
- Q: Can I connect more than four clients to one host?
- A: The IPWFBW supports up to four clients per host. To add more clients, set the channel on the new client device and follow the pairing process.
Documents / Resources
 |
IPmitter IPWFBW Miscellaneous Door Entry Accessories [pdf] User Guide IPWFBW Miscellaneous Door Entry Accessories, IPWFBW, Miscellaneous Door Entry Accessories, Door Entry Accessories, Entry Accessories, Accessories |
