YARDMAX YB6770 26 Inch Two-Stage Snow Blower Instructions

YARDMAX YB6770 26 Inch Two-Stage Snow Blower

Before Starting

• ADD OIL (included) Oil has been drained for shipping. You MUST add oil before starting. Failure to do so will permanently damage your machine.
• ADD FRESH GAS If your machine has sat idle for more than 2 months, you should drain your gasoline tank and fill it only with fresh, new gas.
• PLUG IN the female end (a) of an extension cord into the receptacle outlet on your machine, and the male end (b) into a wall socket.

INSTRUCTIONS

1. Fuel On
   • Open the Fuel Valve (Turn dial to ON)
2. Close Choke
   • Move Choke dial to CLOSED position
3. 3Throttle Up
   • Move the throttle to fast (Turn dial to FAST)
4. Prime It
   • If engine is COLD, press &  release Primer Bulb 2-3 times
5. 5Key In
   • Insert Ignition Key
6. Press Start
   • Press the Start Button and hold 6in until engine starts, then release
7. Open Choke
   • Return Choke dial to OPEN after engine is warm (~15-20s)

Documents / Resources

YARDMAX YB6770 26 Inch Two-Stage Snow Blower [pdf] Instructions YB6770 26 Inch Two-Stage Snow Blower, YB6770, 26 Inch Two-Stage Snow Blower

References

• User Manual