KARCHER SC 3 Upright Easy Fix Steam Mop
Safety instructions
Read this safety chapter and these original instructions before using the device for the first time. Act by them. Keep the original instructions for future reference or future owners.
- In addition to the notes in the operating instructions, you also need to take into consideration the general safety regulations and accident prevention guidelines applicable by law.
- Warnings and information notices attached to the device provide important information for hazard-free operation.
Hazard levels
DANGER
Indication of an imminent threat of danger that will lead to severe injuries or even death.
WARNING
Indication of a potentially dangerous situation that may lead to severe injuries or even death.
CAUTION
Indication of a potentially dangerous situation that may lead to minor injuries.
ATTENTION
Indication of a potentially dangerous situation that may lead to damage to property
General safety instructions
DANGER
Risk of asphyxiation. Keep packaging film out of the reach of children.
WARNING
Only use the device for its proper use. Take into account the local conditions and beware of third parties, in particular children, when working with the device.
- Only people who have been instructed on how to use the device, or have proven their ability to operate it, and have been explicitly instructed to use it, must use the device.
- Persons with reduced physical, sensory or mental capabilities and persons lacking experience and knowledge may only use the appliance if they are properly supervised, have been instructed on the use of the appliance safely by a person responsible for their safety, and understand the resultant hazards involved.
- Children must not operate the device.
- Children must be supervised to prevent them from playing with the appliance.
- Keep the device out of the reach of children when it is connected to the mains or when it is cooling down.
CAUTION - Do not use the device if it has been dropped beforehand, is visibly damaged or if it is leaking.
- Safety devices are provided for your protection. Never modify or bypass safety devices.
Risk of electric shock
DANGER
Never touch the mains plug and socket with wet hands.
- Only connect the device to the alternating current. The voltage indicated on the type plate must match the voltage of the power source
- Do not direct the steam jet directly onto equipment containing electrical components, e.g. the interior space of ovens.
- Do not fill the devices with a removable water reservoir directly via the water connection while they are connected to the mains power. Use a receptacle for filling.
- Do not use the d in swimming pools that contain water.
- The mains plug and extension cable connection must not be inthe water.
- Do not clean over floor sockets.
WARNING
Only connect the device to an electrical connection that has been set up by a qualified electrician as per IEC 60364-1. - Only operate the device in wet rooms, e.g. bathroom, connected to sockets withthe upstream residual current device.
- Check that the mains connection cable with the mains plug is undamaged each time before using the device.
- To avoid any possible danger, a damaged mains connection cable must be immediately replaced by the manufacturer, the authorised customer service department or a qualified electrician.
- Do not damage the power supply and extension cable by running over it, crushing or yanking it or similar. Protect the power supply cable from heat, oil and sharp edges.
- Unsuitable electrical extension cables can be dangerous. Only use electrical extension cables with a splash guard and a diameter of at least 3×1 mm2.
- Only replace couplings on the power supply or extension cable with those with the same splash guard and the same mechanical strength.
- Clean tiled walls with sockets carefully.
- Disconnect the device from the mains during longer operating breaks, after use or before performing any maintenance work.
- Only carry out servicing work when the mains plug is pulled and the steam cleaner has cooled down.
Operation
DANGER
Operation in explosive atmospheres is prohibited.
- When using the device in hazard zones (e.g. service stations), adhere to the respective safety regulations.
WARNING
Risk of scalding. Never touch the steam jet with your hand from a close distance, and do not direct it at people or animals. - The danger of scalding from high water output is if you tilt the device more than 30° to the side during use. Only affects SC 1 devices
- Risk of scalding on the hot steam boiler. Allow the steam boiler to cool down before filling it with water. Does not apply to SC 3 / SC 3 Upright / SC 2 Upright / KST 2 Upright devices Risk of scalding. Let the appliance and accessory parts, particularly the floor cleaning cloth and the hand cover cool down before touching them.
- Risk of scalding. Do not use the appliance for cleaning pressure tanks as this poses a bursting and explosion hazard.
- Risk of scalding from the floor nozzle. Ensure that no part of the body gets under the floor nozzle. Neveroperated the floor nozzle without wearing shoes.
- Risk of scalding. Only operate the appliance once it is fully assembled and functional.
- Risk of scalding. Let the appliance cool down fully before putting it away.
ATTENTION
Do not fill with any cleaning agents or other supplements. - Do not use vinegar or similar agents.
WARNING
Never disconnect accessories from the device while steam is being expelled - Hot water may drip out when disconnecting accessory parts. Allow the device to cool down first.
- Never open themaintenance/safetyy lock during operation. Allow the device to cool down first.
- Do not clamp the steam lever/steam key during operation.
- Replace a damaged steam hose immediately with a steam hose as recommended by the manufacturer.
- Do not steam any objects which contain harmful substances (e.g. asbestos).
CAUTION - Only operate or store the device by the description or figure.
- Check the device and the accessories, in particular the power supply cable, safety lock and steam hose, to make sure it is in proper safe and reliable condition before operation each time. Do not use the device if it is damaged. Replace damaged components immediately.
- Only switch on the device when water is present in the steam boiler. The device may otherwise overheat, see the Troubleshooting chapter of the operating instructions.
- Accidents or damage due to the device falling over. Before all actions with or on the device, you must make sure that it is stable.
- Do not carry the device when performing cleaning work.
ATTENTION - Do not operate the device at temperatures below 0 °C.
- Never leave the device unsupervised while it is connected to the mains.
- Do not use the appliance as a humidifier or heater.
- Ensure the room is well-ventilated when working with the appliance and afterwards.
- Protect the device from rain. Do not store the device outdoors.
- Device damage. Never pour solvents, liquids containing solvents or undiluted acids (e.g. detergents, petrol, paint thinner and acetone) into the boiler/water reservoir.
- Unsuitable water can block the nozzles or damage the water level indicator. Do not fill with condensate water from a tumble dryer, collected rainwater, detergents or additives (e.g. scents).
For upright machines
WARNING
Risk of scalding. Only operate the device on even, horizontal surfaces. Do not lay the device on its side during operation. Do not use the device above head height or horizontally e.g. to clean walls, work surfaces or windows. This only applies to SC 3 Upright / SC 2 Upright / KST 2 Upright
CAUTION
To guarantee stability, place the device on a firm, flat surface.
Care and service
CAUTION
- Have repair work carried out by the authorised customer service only?
Intended use
Use the device only in private households for cleaning level hard floors (e.g. stone floors, tiles, PVC floors and sealed wooden floors such as parquet and laminate) that can withstand the high temperature, pressure and moisture of the device. Do not clean water-sensitive floor coverings such as untreated cork floors (the moisture could penetrate and damage the floor). With the carpet glider fitted, the device can be used for freshening short-pile carpets, runners etc. Detergents are not required.
Environmental protection
The packing materials can be recycled. Please dispose of packaging by the environmental regulations. Electrical and electronic devices contain valuable, recyclable materials and often components such as batteries, rechargeable batteries or oil, which – if handled or disposed of incorrectly – can pose a potential danger to human health and the environment. However, these components are required for the correct operation of the device. Devices marked by this symbol are not allowed to be disposed of together with household rubbish.
Notes on the content materials (REACH) Current information on content materials can be found at: www.kaercher.de/REACH Accessories and spare parts Only use original accessories and original spare parts. They ensure that the appliance will run fault-free and safely. Information on accessories and spare parts can be found at www.kaercher.com.
Scope of delivery
The scope of delivery for the appliance is shown on the packaging. Check the contents for completeness when unpacking. If any accessories are missing or in the event of any shipping damage, please notify your dealer.
Warranty
The warranty conditions issued by our sales company apply in all countries. We shall remedy possible malfunctions on your device within the warranty period free of cost, provided that a material or manufacturing defect is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorised customer service site. (See overleaf for the address)
Safety devices
CAUTION
Missing or modified safety devices Safety devices are provided for your protection. Never modify or bypass safety devices.
Symbols on the device
(according to the type of appliance
Safety valve
In the case of excessively high pressure in the event of a fault, a safety valve relieves the pressure into the atmosphere.
Fuse
The fuse prevents the device from overheating. If the device overheats, the fuse disconnects the device from the power supply. Before re-commissioning the device, contact the responsible KÄRCHER Customer Service.
Device description
The maximum amount of equipment is described in these operating instructions. Depending on the model used, there are differences in the scope of delivery (see packaging). For the illustrations, refer to the graphics page.
Illustration A
- Button/switch area
- Switch – Off
- Switch – On
- Indicator light (red)
- replace the decalcification cartridge.
- RESET button
- set water hardness
- confirmation after cartridge replacement
- LED operating indicator flashing red – mains voltage present and device is heating Green – the device is ready for operation
- Display for steam stage setting
- Button for steam stage setting
- Steam stage 1 – Wood
- Steam stage 2 – Carpet
- Steam stage 3 – Tiles/Stone
- Handle
- Wall anti-slip handle
- Steam lever
- Cable hook with cable fastener
- Decalcification cartridge
- Filling hole for water
- Water reservoir with reservoir cover and carrying handle
- Mains connection cable with mains plug
- Unlocking button for floor nozzle
- Floor nozzle
- Hook and loop fastener
- Microfibre floor cloth (1 x)
- Microfibre floor cloth (2 x)
- Abrasive floor cloth (1 x)
- Carpet glider Optional
Initial Start-Up
ATTENTION
Device damage due to calcification
The decalcification cartridge only works properly if you adjust the device to the local water hardness before operating it for the first time. Set the device to the local water hardness. Set the device to the current water hardness before using it in an area with a different water hardness (e.g. after a move)
- Insert the decalcification cartridge into the water reservoir and press it firmly into place.
Illustration F - Set the water hardness, see chapter Setting the water hardness.
Note
When steaming for the first time after removing and reinserting the decalcification cartridge, the steam jet may be weak or irregular, and individual drops of water may be expelled. The device requires a short running-in period in which the decalcification cartridge fills with water. The steam volume that is expelled increases constantly until the maximum steam volume has been reached after approx. 30 seconds.
Note
Please note that here it is set to steam stage 3 (tiles/ stone) since the running-in period will otherwise be extended.
Installation
Installing the handlebar
- Hold the basic device.
- Fit the handlebar to the end stop into the basic device until it audibly latches into place. The handlebar must sit tightly in the device.
Illustration B
Installing the floor nozzle
- Hold the device by the handle.
- Connect the lower section of the basic unit to the floor nozzle until it audibly latches into place.
Illustration C
Unwinding the power cord
WARNING
Risk of electric shock If the power cable is not completely unwound, the danger exists of you straining and damaging the mains cable by overestimating the range of the cable. Always completely unwind the power cable.
Note
The lower cable holder can be rotated by 360° for removing the cable. The upper cable hook cannot be rotated.
- Turn the lower cable holder upwards.
- Completely remove the power cable from the cable hook.
- Fasten the cable in the fastener of the upper or lower cable hook to prevent it from being run over during cleaning work.
Illustration J
Filling water
The water reservoir can be filled at any time.
ATTENTION
Material damage through open reservoir cover or incorrectly seated or loose water reservoir Liquid can escape and damage the floor covering if the reservoir cover is not correctly closed or the water reservoir is not correctly inserted into the device. Take care to ensure that the reservoir cover is securely closed and the water reservoir is seated tightly in the device when the water reservoir is full.
ATTENTION
- Damage to the device
- Unsuitable water can block the nozzles.
- Do not use condensation from the clothes dryer for filling.
- Do not use collected rainwater for filling.
- Do not use cleaning agents or other additives (e.g. scents) for filling.
Note
The decalcification cartridge must be installed in the water reservoir when filling the water reservoir.
Filling the water reservoir directly on the device
- Hold the device.
- Open the water reservoir cover and fill the water reservoir with max. 0.5 L tap water, directly at the device.
Illustration G - Close the reservoir cover.
Removing the water reservoir for filling
- Hold the device.
- Turn the lower cable hook upwards.
- Pull the water reservoir vertically upwards by the handle.
- Open the water reservoir cover and fill the water reservoir with max. 0.5 L tap water.
Illustration H - Close the water reservoir cover.
- Insert the water reservoir and press downwards until it locks into place.
Switching on the device
ATTENTION
Device and material damage due to tipping over The device can fall over and be damaged if inadequately secured during work breaks or storage. Liquid can also leak out and damage the floor covering in the process. Position the device with the floor nozzle on a solid base, or the handle with the wall anti-slip protection in a vertical position on a solid wall.
ATTENTION
Device damage due to incorrectly set water hardness The decalcification cartridge only works properly if the device is adjusted to the local water hardness. The device may calcify if the water hardness is set incorrectly. Adjust the device to the local water hardness before the first operation, see chapter Setting the water hardness.
Note
When steaming for the first time after removing and reinserting the decalcification cartridge, the steam jet may be weak or irregular, and individual drops of water may be expelled. The device requires a short running-in period in which the decalcification cartridge fills with water. The steam volume that is expelled increases constantly until the maximum steam volume has been reached after approx. 30 seconds.
Note
Please note that here it is set to steam stage 3 (tiles/ stone) since the running-in period will otherwise be extended.
- Place the device on a firm surface.
Illustration I - Insert the mains plug into a socket.
Illustration K - Press the On switch.
Illustration L - The LED operating indicator flashes red.
Illustration M - The LED operating indicator lights up constantly
green after approx. 30 seconds.
Illustration N
The device is ready for use.
Regulating the steam volume
The steam volume setting depends on the surface to be cleaned.
- Press the button with the direction arrows on the handle repeatedly until the desired steam stage is selected.
Illustration P - different steam stages are available
Note
The maximum steam stage (Tiles/stone) is always selected when the device is switched on. Press the steam lever after setting the steam volume.
Illustration O
Refilling water
Note
The water level can be seen through the transparent freshwater tank. When topping up the water, the decalcification cartridge remains secured in the device. Open the water reservoir cover and fill the water reservoir with max. 0.5 L tap water, directly at the device.
Illustration G
Remove the water reservoir, open the water reservoir cover and fill the water reservoir with max. 0.5 L tap water, see chapter Filling water.
Illustration H
Interrupting operation
ATTENTION
Material damage due to condensate/moisture See the chapter Storing the device to prevent material damage during longer work breaks. To save energy, we recommend that you switch off the device for breaks in operation of longer than 20 minutes.
- Press the OFF switch.
Illustration S
Switching off the device
- Press the OFF switch.
Illustration S
The device is switched off. - Pull the mains plug out of the socket.
Illustration T
ATTENTION
Device damage due to water putrefaction The water in the reservoir may be putrefied if the device is not put into operation for more than 2 months. Drain the water reservoir before longer breaks in operation. Drain the water reservoir.
Illustration U
Storing the device
ATTENTION
Material damage due to condensate/moisture The floor covering can be damaged by moisture remaining on the floor cleaning cloth or floor nozzle/device after cleaning. Remove the floor cleaning cloth/carpet glider and dry the floor nozzle/the device after finishing the floor cleaning work. Do not place or store the device on heat-sensitive surfaces.
- Remove the floor cleaning cloth or floor cleaning cloth and carpet glider, see the chapter Floor nozzle and carpet glider.
Illustration D
Illustration E - Remove moisture from the floor nozzle/device.
- Wind the power cable around the upper and lower cable hooks.
Illustration V - Store the device in a vertical position on a solid base or the wall.
Illustration I - Store the device in a dry location that is protected from frost.
Important application instructions
Cleaning the floor areas We recommend sweeping the floor or vacuum cleaning it before using the appliance. In this way, the floor will be cleared of dirt and loose particles before the wet cleaning. Cleaning coated or painted surfaces
ATTENTION
Damaged surfaces Steam can loosen wax, furniture polish, plastic coatings or paint and edge bands from edges. Do not direct the steam at glued laminated edges as the edge band may loosen. Do not use the device for cleaning unsealed wood or parquet floors. Do not use the device for cleaning painted or plastic-coated surfaces such as kitchen or living room furniture, doors or parquet.
How to use the Accessories
Floor nozzle
The floor nozzle is suitable for cleaning washable floor coverings, e.g. stone floors, tiles and PVC floors, and also sealed wooden floors such as parquet and laminate.
ATTENTION
Damage due to steam affects Heat and the effects of steam can lead to damage. Check the heat resistance and steam effect on an inconspicuous area using a minimal volume of steam before use. Steam clean sealed wooden floors using the correct, preset steam level, and do not remain in the same position on the floor for too long.
Note
Detergent residue or care emulsions on the surface to be cleaned can lead to streaks during steam cleaning, which will disappear however once these have been used several times.
CAUTION
Beware of burns to your feet The floor nozzle/floor cleaning cloth heats up during steaming. Hot water may drip out when pulling off the floor cloth. Only operate or remove the floor nozzle/floor cleaning cloth with suitable footwear.
- Fasten the floor cleaning cloth to the floor nozzle. Place the floor cleaning cloth with the hook and loop fastener pointing upwards on the floor.
- lace the floor nozzle onto the floor cleaning cloth, applying slight pressure.
Illustration D - The floor cleaning cloth will stick to the floor nozzle of its own accord due to the hook and loop fastener.
Microfibre cloth
The microfibre floor cloth is suitable for cleaning stone floors and PVC floors, and also sealed wooden floors such as parquet and laminate. The microfibre floor cloth is also suitable for freshening carpets when used in conjunction with the carpet glider.
Abrasive floor cloth
The abrasive floor cloth is suitable for cleaning insensitive surfaces such as tiles or stone.
ATTENTION
Damage to floor coverings The abrasive floor cloth can damage sensitive floor coverings and surfaces. Do not use the abrasive floor cloth for cleaning wooden surfaces. Do not use the abrasive cloth with the carpet glider.
Removing the floor cleaning cloth
Place one foot on the bottom corner of the floor cleaning cloth and lift the floor nozzle. Illustration D
Note
Initially, the floor cleaning cloth’s hook and loop fastener strip are very strong and cannot be removed from the floor nozzle easily. After the floor cleaning cloth has been used several times and washed, it is easier to remove from the floor nozzle and it has reached the optimum adhesion. Removing the floor nozzle from the basic device
ATTENTION
Material damage due to an unstable device Removing the floor nozzle makes the device unstable and it can tip over and damage the device and floor covering. Do not remove the floor nozzle from the basic device after installation. Remove the floor nozzle only when sending the device for servicing.
- Press the OFF switch
Illustration S - Pull the mains plug out of the socket.
Illustration T - Empty the water reservoir.
Illustration U - Hold the device by the handle.
- Actuate the unlocking button on the floor nozzle.
- The floor nozzle is released from the device and can be removed.
Illustration W - Store the device safely in a horizontal position.
Carpet glider
The carpet glider is used for freshening up carpets.
ATTENTION
- Beware of damaging the carpet glider and carpet
- Contamination on the carpet glider, as well as heat and moisture penetration, can result in the carpet being damaged.
- Use the carpet glider only with a microfibre floor cloth on the floor nozzle.
- Steam clean using only the correct steam stage when using the carpet glider (see the display indicator on the handle, carpet floor covering symbol – medium steam stage).
- Before the application, also check the heat resistance and impact of steam on the carpet at an insignificant spot using the smallest steam volume.
- Observe the cleaning instructions from the carpet manufacturer.
- Before using the carpet glider, make sure that the carpet has been vacuumed and that stains have been removed.
- Before use and following operating pauses, remove any possible water accumulation (condensate) in the device by evaporating the condensate into a drain (without floor cleaning cloth / with accessories).
- To prevent too much moistening and to avoid the risk of damage due to temperature effects, do not direct the steam continuously onto one spot (maximum 5 seconds).
- Do not use the carpet glider on deep-pile carpets.
Fastening the carpet glider to the floor nozzle
- For fastening the floor cleaning cloth to the floor nozzle, please refer to the chapter Floor Nozzle.
Illustration D - Using light pressure, allow the floor nozzle to slide into the carpet glider and engage there.
Illustration E - Start cleaning the carpet.
- Removing the carpet glider from the floor nozzle
CAUTION
Beware of burns to your feet The carpet glider can heat up during the steaming process. Do not operate or remove the carpet glider bare-footed or using open sandals. Only operate or remove the carpet glider using suitable footwear.
- Press the strap on the carpet glider downwards using your toecap.
- Lift the floor nozzle upwards.
Illustration E
Care and service
Draining the water reservoir
ATTENTION
Device damage due to water putrefaction If the device is not put into operation for more than 2 months, the water in the reservoir may be putrefied. Drain the water reservoir before breaks in operation.
- Press the OFF switch.
- The device is switched off.
- Pull the mains plug out of the socket.
- Remove the reservoir cover.
- Drain the water reservoir.
- The cartridge can remain in the water reservoir.
Illustration U
Replacing the decalcification cartridge
ATTENTION
Device damage and shortened service life If the replacement intervals (indicator light) for the decalcification cartridge are not observed, there is a risk of device damage and the service life of the device may be shortened. Observe the replacement intervals (indicator light).
Note
The replacement intervals depend on the local water hardness. Areas with hard water (e.g. III/IV) have a higher replacement interval than areas with soft water (e.g. I/II).
The indicator lamp at the end of the run time
- The “decalcification cartridge indicator light” indicates when the decalcification cartridge has to be replaced:
- The indicator light flashes 2 hours before the run time expires.
Illustration R - The indicator light flashes more quickly 1 hour before the run time expires.
- The indicator light and the LED strip on the device light up when the run time of the decalcification cartridge has expired. The floor-covering symbols on the handle do not light up.
- The pump switches off automatically (no water steam) to prevent damage to the device.
Inserting the decalcification cartridge
ATTENTION
Device damage
There is a risk of damage to the device if the used decalcification cartridge is re-used. Work carefully to prevent mixing up the cartridges.
Installation information
When steaming for the first time after removing and reinserting the decalcification cartridge, the steam jet may be weak or irregular, and individual drops of water may be expelled. The device requires a short running-in period in which the decalcification cartridge fills with water. The steam volume that is expelled increases constantly until the maximum steam volume has been reached after approx. 30 seconds.
Note
Removing the water reservoir makes it easier to remove and install the decalcification cartridge.
- Press the OFF switch.
- The device is switched off.
- Remove the reservoir cover.
- Remove the decalcification cartridge.
- Insert the new decalcification cartridge and press it firmly into place.
- Press the On switch. The device is switched on.
- Press and hold the RESET button for 4 seconds.
- The “replace decalcification cartridge” indicator light
- goes out and the run time for the decalcification cartridge starts again.
Illustration Q - Allow the device to heat up.
- Press and hold the steam lever for approximately 30 seconds to vent the decalcification cartridge.
Setting the water hardness
ATTENTION
Device damage due to calcification Without a decalcification cartridge, the device may calcify if the water hardness is set incorrectly. Always work with a decalcification cartridge. Set the device to the local water hardness. Set the device to the current water hardness before using it in an area with a different water hardness (e.g. after a move).
Note
Your water board or municipal utilities authority can provide information on the hardness of tap water. The water hardness is set using the RESET button. The water hardness setting is stored until a new setting (e.g. after a move) is made. The device is set to the highest water hardness (level IV) in the factory. The device indicates the set water hardness with flash pulses. Water hardness levels and flash pulses.
| Hardness range | °dH | mmol/l | Number of flash pulses | The interval between flash pulses | |
| I | Soft | 0-7 | 0-1.3 | 1x | 4 seconds |
| II | Medium | 7-14 | 1.3-2.5 | 2x | |
| III | Hard | 14-21 | 2.5-3.8 | 3x | |
| IV | Very hard | >21 | >3.8 | 4x | |
Note
The anti-calcification effect of the decalcification cartridge is activated as soon as the reservoir is filled with water and the device is put into operation. Lime in the water is absorbed by the granulate in the decalcification cartridge. Additional descaling is not required.
Note
The granulation in the cartridge can discolour on contact with water due to the mineral content in the water, which is no cause for concern and has no negative effects on the device, cleaning work or the functionality of the cartridge.
Note
Do not pause for longer than 15 seconds when setting as the device will otherwise be set automatically to the last selected water hardness or the highest water hardness set during initial start-up.
- Connect the mains plug.
- Make sure that the device is switched off.
- Hold the RESET button pressed and switch on the device.
Illustration Q - After approximately 2 seconds, the indicator light flashes and signals the current water hardness setting with the number of pulses.
- Release the RESET key. The device is set to water hardness level IV at the factory and the indicator light, therefore, flash 4 times in succession.
- You can cycle between the different water hardness levels by pressing the RESET button repeatedly until the desired water hardness level is reached.
- Once the desired water hardness level has been reached, press and hold the RESET button for 3 seconds to store the selected water hardness level. The indicator light for the water hardness lights up to confirm saving.
Care of accessories
(Accessories – depending on the scope of delivery)
Note
The micro fibre cloths are not suitable for dryers.
Note
Observe the instructions on the washing tag when washing the clothes. Do not use any liquid softeners as this will affect the ability of the clothes to pick up dirt. Wash the floor cleaning cloths in a washing machine at a max. temperature of 60 °C.
Removing the handle
ATTENTION
Device damage The handle components can be damaged by repeated removal. Do not remove the handle from the basic unit once it has been assembled. The handle may only be removed from the basic device if the device is sent out for service purposes.
Troubleshooting guide
Malfunctions often have simple causes that you can remedy yourself using the following overview. When in doubt, or in the case of malfunctions not mentioned here, please contact your authorised Customer Service.
WARNING
Risk of electric shock and burns Trying to eliminate faults while the appliance is connected to the mains or has not yet cooled down is always dangerous. Remove the mains plug. Allow the appliance to cool down. No steam / little steam although there is water in the reserve or The decalcification cartridge has not been inserted or has been inserted incorrectly.
- Fit the decalcification cartridge and/or check that the decalcification cartridge sits tightly in the reservoir and presses in again if necessary.
- The decalcification cartridge has been removed when filling with water and/or a new decalcification cartridge has been fitted
- Always leave the decalcification cartridge in the water reservoir when filling it with water.
- Press and hold the steam lever constantly.
- The full steam output is reached after approximately 30 seconds.
- The red “Replace decalcification cartridge” indicator light flashes but the device still functions correctly
- The run time of the decalcification cartridge ends soon.
- Fit a new decalcification cartridge, see chapter Replacing the decalcification cartridge.
- No steam despite sufficient water in the reservoir, the indicator light and LED operating indicator on the device light up continuously red, and the floor covering symbols on the handle do not light up
- The run time for the decalcification cartridge has expired
- Fit a new decalcification cartridge, see chapter Replacing the decalcification cartridge.
- If a new decalcification cartridge has already been fitted and this fault still occurs, the RESET button has probably not been pressed after replacing the decalcification cartridge.
- Press and hold the RESET button for 4 seconds after inserting the decalcification cartridge, see chapter Replacing the decalcification cartridge.
Technical data
| Electrical connection | ||
| Voltage | V | 220-240 |
| Phase | ~ | 1 |
| Frequency | Hz | 50-60 |
| Degree of protection | IPX4 | |
| Protection class | I | |
| Device performance data | ||
| Heating capacity | W | 1600 |
| Heating-up time | Seconds | 30 |
| Continuous steaming | g/min | 40 |
| Filling quantity | ||
| Water reservoir | l | 0,5 |
| Dimensions and weights | ||
| Weight (without accessories) | kg | 3,1 |
| Length | mm | 314 |
| Width | mm | 207 |
| Height | mm | 1185 |
| Subject to technical modifications. | ||
Subject to technical modifications. Register your product and benefit from many advantages. Rate your product and tell us your opinion.
www.kaercher.com/dealersearch
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28-40
71364 Winnenden (Germany)
Documents / Resources
 |
K RCHER SC 3 Upright Easy Fix Steam Mop [pdf] Instruction Manual SC 3 Upright Easy Fix Steam Mop, SC 3, Upright Easy Fix Steam Mop, Easy Fix Steam Mop, Fix Steam Mop, Steam Mop |
