emerio CT-502 Hot Air Styler 

SAFETY INSTRUCTIONS

Before use make sure to read all of the below instructions in order to avoid injury or damage, and to get the best results from the appliance. Make sure to keep this manual in a safe place. If you give or transfer this appliance to someone else make sure to also include this manual.
In case of damage caused by user failing to follow the instructions in this manual the warranty will be void. The manufacturer/importer accepts no liability for damages caused by failure to follow the manual, a negligent use or use not in accordance with the requirements of this manual.

  1. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  2. Children shall not play with the appliance.
  3. Cleaning and user maintenance shall not be made by children without supervision.
  4. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  5. Do not use the appliance near water
    Warning: do not use this appliance near bathtubs, showers, basins or other vessels containing water.
  6. When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the hairdryer is switched off. For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.
  7. Before inserting the plug into the mains socket, please check that the voltage and frequency comply with the specifications on the rating label.
  8. Disconnect the mains plug from the socket when the appliance is not in use and before cleaning.
  9. If an extension cord is used it must be suited to the power consumption of the appliance, otherwise overheating of the extension cord and/or plug may occur. There is a potential risk of injuries from tripping over the extension cord. Be careful to avoid dangerous situations.
  10. Ensure that the mains cable is not hung over sharp edges and keep it away from hot objects and open flames.
  11. Do not immerse the appliance or the mains plug in water or other liquids. There is danger to life due to electric shock!
  12. To remove the plug from the plug socket, pull the plug. Do not pull the power cord.
  13. Do not touch the appliance if it falls into water. Remove the plug from its socket, turn off the appliance and send it to an authorized service center for repair.
  14. Do not plug or unplug the appliance from the electrical outlet with a wet hand.
  15. Never attempt to open the housing of the appliance, or to repair the appliance yourself. This could cause electric shock.
  16. Never leave the appliance unattended during use.
  17. This appliance is not designed for commercial use.
  18. Do not use the appliance for other than intended use.
  19. Do not wind the cord around the appliance and do not bend it.
  20. Keep the device and the cable away from heat, direct sunlight, moisture, sharp edges and suchlike.
  21. Never leave the device unsupervised! Switch off the device whenever you are not using it, even if this is only for a moment.
  22. Use only original accessories.
  23. Attachments may get hot in use. Use care when handling them.
  24. The slots and openings on the appliance are for ventilation.
    Do not cover or block them as it could lead to overheating.
  25. Do not insert any objects into the air vents.
  26. Do not use outdoors, or where aerosol products are being used.
  27. Do not direct hot air toward eyes.
  28. Do not use with synthetic hair or wigs.
  29. Regarding the instructions for precautions during user maintenance, thanks to refer to the below paragraph of the manual.

PARTS

  1. Round brush
  2. Cool shot button
  3. Switch board
  4. Indicator light
  5. Release button
  6. Hanging loop
  7. Handle
  8. Air inlet

Switch board:

  • “0”: off;
  • “1”: warm air flow;
    “2”: hot air flow.

BEFORE USE

  1. Use the unit with dry or towel-dried hair, but never with complete wet hair.
  2. Use a conditioner after having washed your hair. Rinse and dry the hair well and comb it out before styling. All this will make the styling easier.

HOW TO ATTACH OR RELEASE THE ROUND BRUSH

To attach: Insert and twist the round brush into the air outlet end of the main body until you hear a click sound.
To release: Press the release button and twist off the round brush at the same time.

HOW TO USE

  1. Always ensure the switch is set to position “0” before plug in the power outlet.
  2. Set the switch to position “1” or “2” for warm or hot air flow, the appliance is on and the indicator light is illuminating.
  3. On level “2”, the exhausting air and attachment in contact with the hot air will get very hot quickly. Use this level only short for faster styling to avoid that hair gets too hot.
  4. With the “cool shot” function (press and hold the button) you can minimize the temperature during the treatment. When pressing and moving the button to the front at the same time, the button can be locked to hold a lower temperature. With the lower temperature the hair is treated more gently and the treatment can be prolonged.
  5. Always allow your hair to cool down a bit before finishing the hairdo by combing the hair out.

Note:

  1. For styling, forming, curling, round brush shall be attached to the main body. Do not wind too thick strands of hair around the round brush. Wind a smaller strand of hair, instead. .
  2. When using the appliance to create curls and waves, dry hair almost completely on level “2” hot air flow, then finish styling using level “1” warm air flow. This will set the style in your hair.
  3. To avoid over-drying, keep the appliance moving as you style.

CLEANING AND CARE

  1. Ensure that the appliance is disconnected from the mains supply and cooled down before cleaning.
  2. If necessary the housing can be wiped off with a dry soft cloth without any detergents.
  3. Clean the air inlet opening from time to time with a fine brush.
  4. Remove hair and lint from the round brush after each use (after the appliance has cooled down completely).
  5. Never clean sensitive surfaces with sharp-edged or metallic objects or sharp detergents.

TECHNICAL DATA

Operating voltage: 220-240V ~ 50/60Hz
Power: 1000W

GUARANTEE AND CUSTOMER SERVICE

Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred during production or transportation, please return the device to your dealer.
For the purchased device we provide 2 years guarantee, commencing from the day of sale. If you have a defective product, you can directly go back to the point of purchase.
Defects which arise due to improper handling of the device and malfunctions due to interventions and repairs by third parties or the fitting of non-original parts are not covered by this guarantee. Always keep your receipt, without the receipt you can’t claim any form of warranty. Damage caused by not following the instruction manual, will lead to a void of warranty, if this results in consequential damages then we will not be liable. Neither can we hold responsible for material damage or personal injury caused by improper use or if the instruction manual are not properly executed. Damage to accessories does not mean free replacement of the whole appliance. In such case please contact our service department. Broken glass or breakage of plastic parts is always subject to a charge. Defects to consumables or parts subjected to wearing, as well as cleaning, maintenance or the replacement of said parts are not covered by the warranty and are to be paid.

ENVIRONMENT FRIENDLY DISPOSAL

Recycling – European Directive 2012/19/EU
This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Emerio B.V.
Oudeweg 115
2031 CC Haarlem
The Netherlands

Customer service

T: +31 (0) 23 3034369
www.emerio.eu/service
Looking for spare parts? Have a look at https://spareparts.emerio.eu

Documents / Resources

emerio CT-502 Hot Air Styler [pdf] Instruction Manual
CT-502 Hot Air Styler, CT-502, Hot Air Styler, Air Styler, Styler

References

Leave a comment

Your email address will not be published. Required fields are marked *