alpina logoInstruction manual
Model: KPT-2402D
alpina KPT-2402D Ceramic Fan Heater Ceramic fan heater
CE SYMBOL ITEM: 871125225009
A.I.&E. Adriaan Mulderweg 9-11
5657 EM Eindhoven, The Netherlands

KPT-2402D Ceramic Fan Heater

PLEASE SAVE THESE INSTRUCTIONS
WARNING: READ ALL INSTRUCTION AND WARNINGS CAREFULLY BEFORE STARTING INSTALLATION. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULTS IN A POSSIBLE ELECTRIC SHOCK, FIRE HAZARD AND WILL VOID THE WARRANTY.
Thank you for choosing our PTC Heating System. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new heater.

GENERAL NOTES

Read the operating instructions carefully before putting the appliance  into operation and keep the instructions including the warranty, thereceipt and, if possible, the box with the internal packing. If you give this appliance to other people, please also pass on the operating instructions.

  1. The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use.
  2. Do not use it outdoors. Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately.
  3. When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull the plug itself, not the lead) if the appliance is not being used and remove the attached accessories.
  4. Do not operate the appliance without supervision. If you leave the room you should always turn the appliance off. Remove the plug from the socket.
  5. The appliance and the mains lead have to be checked regularly for signs of damage. If damage is found the appliance must not be used.
  6. Use only original spare parts.
  7. In order to ensure your children’s safety, please keep all packaging(plastic bags, boxes, polystyrene etc.) out of their reach.
    WARNING: Do not allow small children to play with the plastic foil.
    There is a danger of suffocation!

Special Safety Precautions for this Appliance
You will find the following symbol with warning character on the appliance:
alpina KPT-2402D Ceramic Fan Heater - icon WARNING: Do not cover. Make sure that the appliance does not become covered by towels, curtains or similar objects as this could lead to overheating. You must ensure that the air inlet and outlet openings are always unobstructed.

WARNING:

  • Some parts of the product can become very hot and cause burns. Avoid contact with the skin. Carry the appliance by its handle.
  • You must be particularly careful when children and vulnerable persons are present.
  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  • Children shall not play with the appliance.
  • Cleaning and user maintenance shall not be made by children without supervision.
  • Children younger than 3 years of age should be kept away from the appliance, unless they are supervised at all times.
  • Children from the age of 3 and younger than 8 years of age may only turn the appliance on and off if they are supervised, or have been instructed with regard to the safe use of the appliance, and if they have understood the risks resulting from it, provided that the appliance has been placed and installed in its normal position of use.
  • Children from the age of 3 and younger than 8 years of age may not insert the plug into the socket, may not regulate the appliance, may not clean the appliance and / or may not perform the maintenance by the user.
  • Please keep a safety distance of at least 90 cm between all sides of the appliance and furniture and other objects.
  • Under no circumstances may the fan heater be used in rooms with explosive gas (e.g. petrol) or while work is being carried out with inflammable adhesives or solvents (e.g. when gluing or painting parquet, PVC etc.).
  • Do not insert any objects into the fan heater.
  • Ensure that a safety distance is maintained between the power cord and the housing.
  • Do not use the fan heater in the open air.
  • Do not use the fan heater in close proximity to bathtubs, showers or swimming pools.
  • The fan heater should not be placed directly below a mains power socket.
  • Do not repair the appliance by yourself. Always contact an authorized technician. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  • Do not use this heater if it has been dropped.
  • o not use if there are visible signs of damage to the heater.
  • Use this heater on a horizontal and stable surface.
  • WARNING: Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.
  • WARNING: To reduce the risk of fire, keep textiles, curtains, or any other flammable material a minimum distance of 1m from the air outlet.

HANDLING BATTERIES

WARNING:

  • Do not expose batteries to excessive heat such as sunlight, fire or similar. There is a risk of explosion!
  • Batteries are not toys. Keep away from children.
  • Do not open batteries by force.
  • Avoid contact with metal objects (rings, nails, screws,etc.). There is a risk of short circuit!
  • A short circuit could cause the battery to heat up excessively or even to catch fire, resulting in injuries.
  • For your own safety, cover the battery terminals with adhesive tape during transport.
  • In case of battery leakage, make sure not to rub the liquid into your eyes or mucous membranes. In case of contact, wash your hands and rinse your eyes with clear water. Seek medical attention if any discomfort persists.
  • Non-rechargeable batteries are not to be recharged.
  • Exhausted batteries are to be removed from the appliance and safely disposed of.
  • If the appliance is to be stored unused for a long period, the batteries should be removed.
  • The supply terminals are not to be short-circuited.

CAUTION:
Batteries can leak and lose battery acid. If the remote control is not used for a long period of time, remove the battery.
Unpacking the Appliance

  1. Remove the appliance from its packaging.
  2. Remove all packaging material such as foils, padding, cable holders and cardboard.
  3. Fully unwind the cable.

NOTE: There might be dust and production residue present on the appliance. We recommend cleaning the appliance as described under “Cleaning”.

OVERVIEW OF THE COMPONENTS

alpina KPT-2402D Ceramic Fan Heater - OVERVIEW

1. Handle
2. Grille for heating elements
3. Stand
4. Safety switch
5. Display
6. MODE button ( select temperature setting)
7. alpina KPT-2402D Ceramic Fan Heater - icon 1 button (increase temperature)
8. alpina KPT-2402D Ceramic Fan Heater - icon 2 button ( decrease temperature)
9. Indicator lamps
10. alpina KPT-2402D Ceramic Fan Heater - icon 3button ( switching the appliance on/off)
11.alpina KPT-2402D Ceramic Fan Heater - icon 4 button ( switching the display on/off)
12. alpina KPT-2402D Ceramic Fan Heater - icon 5 button (time-delayed switch on/off)
13. alpina KPT-2402D Ceramic Fan Heater - icon 6 button (switch oscillation on/off)

REMOTE CONTROL

NOTE:
The button cell in the battery compartment of the remote control has been secured with a foil for transport. This will extend the durability of the battery. Before initial use please remove this foil so that the remote control is ready for operation.
The range of the remote control is limited.
When using the remote control, please ensure that there are no obstacles placed between it and the sensor on the appliance.
Changing the Battery of the Remote Control
If the range of the remote control is reduced during use, please proceed as follows:

  1. Open the battery compartment on the bottom of the remote control by holding the lever inwards and pulling out the battery compartment.
  2. Replace the button cell with a battery of the same type (CR2025). Ensure correct polarity.
  3. Then close the battery lid.

NOTES FOR USE
Connected Load
The appliance supports a power input of 2000 W.
CAUTION: Overload

  • When using an extension cord, it must have a cable cross-section of at least 1.5 mm².
  • Do not use multi-outlet power strips, since this appliance is too powerful.
  • Do not connect any other powerful appliances to the same electric circuit.

Safety Switch
Your fan heater features a safety switch that disconnects the power supply in case the appliance falls over. The safety switch prevents hazards caused by overheating.
CAUTION:
Place the appliance on a smooth, horizontal surface. Avoid carpets in order to prevent failure of the safety switch.
NOTE:
As soon as the safety switch has been activated, the appliance must be set and switched on again.
Electric Connection

  1. Make sure the voltage of the appliance (see rating label) matches the mains voltage to be used.
  2. Connect the mains plug to a properly installed isolated ground socket. All indicator lamps light up briefly.

Operating Buttons
The buttons on the appliance are sensor touch buttons. In order to perform the corresponding function gently touch the buttons.
Whenever a button is pressed, it will be confirmed by a beep sound.

Control Panel Remote Control Function
alpina KPT-2402D Ceramic Fan Heater - icon 3 alpina KPT-2402D Ceramic Fan Heater - icon 3 Switching the appliance on/off
alpina KPT-2402D Ceramic Fan Heater - icon 4 alpina KPT-2402D Ceramic Fan Heater - icon 7 Switch display on/off
alpina KPT-2402D Ceramic Fan Heater - icon 5 alpina KPT-2402D Ceramic Fan Heater - icon 8 Time-delayed switch-off: 01 to 12 hours
alpina KPT-2402D Ceramic Fan Heater - icon 6 alpina KPT-2402D Ceramic Fan Heater - icon 6 Switch oscillatinon on/off
MODE alpina KPT-2402D Ceramic Fan Heater - icon 9 Power level selectionalpina KPT-2402D Ceramic Fan Heater - icon 12
alpina KPT-2402D Ceramic Fan Heater - icon 1 alpina KPT-2402D Ceramic Fan Heater - icon 10 Increase temperature
alpina KPT-2402D Ceramic Fan Heater - icon 2 alpina KPT-2402D Ceramic Fan Heater - icon 11 decrease temperature

OPERATION

NOTE:

  • The operation is explained using the buttons on the appliance.
  • The buttons can only be pressed once the appliance has been switched on by using the button.

Switching the Appliance On / Off

  • Press the alpina KPT-2402D Ceramic Fan Heater - icon 3 button to switch on the appliance. The appliance initiates the fan setting and displays the current ambient temperature. Thealpina KPT-2402D Ceramic Fan Heater - icon 13 indicator lamp lights. To avoid overheating, the fan is operating continuously.
  • Press thealpina KPT-2402D Ceramic Fan Heater - icon 3 button again to switch off the appliance.

NOTE:
A 30 second timer will start in the display. During this period the fan remains in operation to cool down the appliance. The indicatoralpina KPT-2402D Ceramic Fan Heater - icon 13lamp lights. When the timer period has lapsed, the appliance will automatically switch into standby mode.
CAUTION:
When not using the appliance, disconnect the mains plug.

Power Level Selection
Press the MODE button repeatedly to choose between the available power levels.
alpina KPT-2402D Ceramic Fan Heater - icon 13 Fan operation (without heating)
Power level 1 (1300 Watt)
Power level 2 (2000 Watt)
Use the + and – buttons to select a temperature between 15 and 35°C.
NOTE:

  • Once the current ambient temperature has been reached, the appliance switches off and automatically maintains the set temperature level.
  • There may be a slight difference between the displayed and the actual room temperature. This is due to the design and does not mean that the appliance is defective.

Timedelayed Switch-off
You can set a time-controlled switch-off for the appliance.

  • Use the alpina KPT-2402D Ceramic Fan Heater - icon 5 button to select a time setting between 01 and 12 .
  • Upon expiry of the timer, the appliance will switch off automatically.

Switch Oscillation On / Off
Press the alpina KPT-2402D Ceramic Fan Heater - icon 6 button to switch on oscillation. The appliance automatically rotates in the range of about 90 degrees. The alpina KPT-2402D Ceramic Fan Heater - icon 6 indicator lamp lights.
Switch Display On / Off
Press the alpina KPT-2402D Ceramic Fan Heater - icon 7 button to switch the display and the indicator lamps on or off.

OVERHEAT PROTECTION

The appliance features an overheat protection mechanism causing the appliance to switch off automatically in case of overheating.

  1. Use the button to switch off the appliance and disconnect it from the mains socket by pulling the plug.
  2. Let the appliance cool down for approx. 10 minutes before using it again.

NOTE:
If the overheat protection mechanism causes the appliance to switch off again after a short period, this might indicate a defect.

  1. Switch off the appliance and disconnect it from the mains.
  2. Have the appliance checked by your dealer or our customer service.

CLEANING

WARNING:

  • Always disconnect from the mains before cleaning and wait until the appliance has cooled down.
  • Never immerse the appliance in water to clean it. This may lead to electrical shock or fire.

CAUTION:

  • Do not use wire brushes or other abrasive materials.
  • Do not use caustic or scouring agents.
  • Wipe away dust with a dry cloth.
  • Flecks can be removed with a suitably damp cloth.

Dust on the Protective Grilles
Accumulation of dust on the protective grilles can lead to overheating.

  • Remove the dust by careful brushing.
    or
  • Use the upholstery nozzle of your vacuum cleaner to remove the dust.

SPECIFICATIONS

Model KPT-2402D
Power supply 220-240 V~,50-60 Hz
Power Consumption 2000W
Protection class II
Net weight approx. 1.5 kg

NOTICE OF DIRECTIVE CONFORMITY
The appliance meets the European standards and directives in the current version at delivery:

  • Low Voltage Directive (LVD) 2014 / 35 / EC
  • Electromagnetic Compatibility (EMC) Legislation Directive 2014 / 30 / EC
  • RoHS-directive 2011 / 65 / EU & (EU) 2015 / 863
  • Ecodesign-directive (ErP) 2009 / 125 / EC
  • Commission Regulation (EU) 2015 / 1188

PRODUCT DATA SHEET

Model identifier KPT2402D
Item Symbol Value Unit Item Unit
Heat output Type of heat Input, for electric storage local space heaters only
Nominal heat output Pnom 2.0 KW manual heat charge control, with integrated thermostat N.A.
Minimum heat output
(indicative)
Pmin N.A. kW manual heat charge control with room and / or outdoor temperature feedback N.A.
Maximum continuous heat output Pmax.c 2.0 Kw electronic heat charge control with room and / or outdoor temperature feedback N.A.
Auxiliary electricity consumption fan assisted heat output N.A.
At nominal heat output el max 0.000 kW Type of heat output / room temperature control
At minimum heat output el min 0.000 kW single stage heat output and no room temperature control No
In standby mode el sb 0.000 kW Two or more manual stages, no room temperature control No
with mechanic thermostat room temperature control Yes
with electronic room temperature control No
electronic room temperature control plus day timer No
electronic room temperature control plus week timer No
Other control options
room temperature control. with presence detection No
room temperature control. with open window detection No
with distance control option No
with adaptive start control No
with working time limitation No
with black bulb sensor No
N. A. = not applicable

WEE-Disposal-icon.png Electrical and electronic devices/ information for private households
The Directive 2012/19/EU on waste electrical and electronic equipment contains a large number of requirements for handling electrical and electronic equipment. The most important are compiled here.

  1. Separate collection of waste electrical and electronic equipment
    Electrical and electronic equipment that has become waste is referred to as waste electrical and electronic equipment (WEEE). Owners of WEEE must collect them separately from unsorted municipal waste. WEEE do not belong in household waste, but in special collection and return systems.
  2. Batteries, accumulators and lamps 
    Owners of WEEE must hand over them in complete condition. However, owners of WEEE have to separate old batteries and accumulators which are not enclosed by the WEEE, as well as lamps which can be removed, from the WEEE without destroying it before handing it over to a collection point.
  3. Ways to return the WEEE
    Owners of WEEE from private households can hand them in free of charge at the designated collection points of the public waste disposal authorities or at the take-back points set up by manufacturers or distributors in terms of the Directive 2012/19/EU.
  4. Privacy Protection Notice
    WEEE often contain sensitive personal data. This  applies especially to information and telecommunications technology devices such as computers and smartphones. In your own interest, please note that each end user is responsible for deleting the data on the WEEE before disposing it.
  5. Potential environmental impact
    WEEE contain substances that may have a negative impact on the environment and human health if their collection, hand-over, re-use or material recovery is not done in compliance with respective legislation.
  6. Your role in WEEE waste treatment
    By fulfilling these obligations and especially by fulfilling the obligation to collect WEEE separately, not to dispose it together with unsorted municipal waste and to hand it over to at collection points, you as the end user contribute to the re-use and material recovery of WEEE.
  7. Meaning of the crossed-out dustbin symbol
    The crossed-out dustbin, which is regularly displayed on electrical and electronic equipment, indicates that the respective device must be collected separately from unsorted municipal waste at the end of its life cycle.

alpina logo

Documents / Resources

alpina KPT-2402D Ceramic Fan Heater [pdf] Instruction Manual
KPT-2402D Ceramic Fan Heater, KPT-2402D, Ceramic Fan Heater, Fan Heater

References

Leave a comment

Your email address will not be published. Required fields are marked *