ICP DAS-logo

ICP DAS tSG-3781B, tSG-3781L Signal Conditioner

ICP DAS tSG-3781B, tSG-3781L Signal Conditioner-product

Introduction

The tSG-3781B/tSG-3781L is a device with setting buttons located on the left side of the LCD screen (tSG-3781L).

Appearance

Version: Ver1.002023 Mar. 1

Applications

  • Heating system in buildings
  • Ventilation system
  • Controlling servo-assisted diaphragm valve

Version: Ver1.002023 Mar. 2

PIN Assignment

  • Wire Connection:
  • Iin Input PWM Output
  • Version: Ver1.002023 Mar. 3

Block Diagram

PWM Duty Cycle and Frequency setting:

The following figures show the button switch positions used to configure the channel PWM duty cycle and frequency range. The PWM frequency configuration button switches are located on the left side of the module for front view.

PWR Mode Up Down Set

The power LED of the module Press MODE to modify the channel frequency, the channel frequency flashes. Press UP to increase the frequency, long press to increase quickly. Press DOWN to decrease the frequency, long press to decrease quickly. Press SET to save
the modified value. Press MODE during the modification to stop the modification.

Version: Ver1.002023 Mar. 4

Dimensions

No specific information provided.

Technical Service

Please E-mail your problem description to service@icpdas.com when you have any questions.

More detail information: www.icpdas.com

Version: Ver1.002023 Mar. 5

Introduction

The tSG-3781B/L is a 1-channel DC current input signal conditioning module which can convert 4 ~ 20 mA current input to PWM output. This provides an economical solution when the 4 to 20mA current need to be converted to PWM output. The duty cycle, 0% to 100%, of the PWM output is a linear transformation of the 4 to 20mA current input. The frequency of the PWM signal can be in the range 600Hz to 800Hz and it can be adjusted by buttons.
The tSG-3781B/L includes a monochrome graphic LCD display which shows the duty cycle and frequency of the 1-channel PWM output signal. 4 kV ESD and 4 kV EFT protection are also provided to enhance noise protection capabilities in industrial environments.
Note1: The setting buttons are at the bottom of the LCD. (tSG-3781B)
The setting buttons are on the left side of the LCD. (tSG-3781L)

Appearance

ICP DAS tSG-3781B, tSG-3781L Signal Conditioner-fig1

Applications

  • Heating system in buildings
  • Ventilation system
  • Controlling servo-assisted diaphragm valve

    ICP DAS tSG-3781B, tSG-3781L Signal Conditioner-fig2

PIN Assignment

ICP DAS tSG-3781B, tSG-3781L Signal Conditioner-fig3

Wire Connection

ICP DAS tSG-3781B, tSG-3781L Signal Conditioner-fig4

Block Diagram

ICP DAS tSG-3781B, tSG-3781L Signal Conditioner-fig5

PWM Duty Cycle and Frequency setting

The following figures show the button switch positions used to configure the channel PWM duty cycle and frequency range. The PWM frequency configuration button switches are located left side the module for front view.

ICP DAS tSG-3781B, tSG-3781L Signal Conditioner-fig6

PWR The power LED of the module
Mode Press MODE to modify the channel frequency, the channel frequency flashes.
Up Press UP to increase the frequency, long press to increase quickly.
Down Press DOWN to decrease the frequency, long press to decrease quickly.
 

Set

Press SET to save the modifi ed value.

Press MODE during the modifi cation to stop the modification.

Dimensions

ICP DAS tSG-3781B, tSG-3781L Signal Conditioner-fig7

Technical Service

Please E-mail your problem description to service@icpdas.com when you have any questions.
More detail information: www.icpdas.com

Documents / Resources

ICP DAS tSG-3781B, tSG-3781L Signal Conditioner [pdf] User Manual
tSG-3781B, tSG-3781L, tSG-3781B tSG-3781L Signal Conditioner, tSG-3781B Signal Conditioner, tSG-3781L Signal Conditioner, Signal Conditioner, Conditioner

References

Leave a comment

Your email address will not be published. Required fields are marked *