BOMANN VS 2195.1 Household Larder Refrigerator Instruction Manual

HAUSHALTS- VOLLRAUMKÜHLSCHRANK VS 2195.1
HOUSEHOLD- LARDER Instruction manual

Introduction

Thank you for choosing our product. We hope you will enjoy using the appliance.
Symbols in these instructions for use Important information for your safety is specially marked. It is essential to comply with these instructions to avoid accidents and prevent damage.
WARNING:
This warns you of dangers to your health and indicates possible injury risks.
CAUTION:
This refers to possible hazards to the machine or other objects.
NOTE: This highlights tips and information.

General notes

Read the operating instructions very carefully before putting the appliance into operation and keep the instructions including the warranty and the receipt. If you give this appliance to other people, also pass on the operating instructions.
NOTE:

• Due to constant product modifications, your appliance may differ slightly from these operating in- structions; Functions and methods of use remain unchanged.
• The illustrations in these operating instructions may differ from the original appliance.
• The appliance is designed exclusively for private use and for the envisaged purpose. This appli- ance is not fit for commercial use.
• The appliance is only to be used as described in the user manual. Do not use the appliance for any other purpose. Any other use is not intended and can result in damages or personal injuries.
• This appliance is not intended to be used as a built-in appliance.
• Do not use it outdoors. Keep it away from sourcesof heat, direct sunlight and humidity.
• When not in use, for cleaning, user maintenance works or with disruption, switch off the appliance and disconnect the plug (pull the plug itself, not the lead) or turn off the fuse.
• The appliance and if possible the mains lead have to be checked regularly for signs of damage. If damage is found the appliance must not be used.
• For safety reasons, alterations or modifications ofthe appliance are prohibited.
• To ensure your children’s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.

WARNING:
Do not allow small children to play with the foil.
There is a danger of suffocation!

Special safety information for this unit

• This unit is intended to be used in household and similar applications such as
  – staff kitchen areas in shops, offices and other working environments;
  – farm houses and by clients in hotels, motels and other residential type environments;
  – bed and breakfast type environments;
  – catering and similar non-retail applications.
  WARNING:
• Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
• Do not use mechanical devices or other means to accelerate the defrosting process (if necessary), except those described in this manual (depending on the model included the scope of delivery).
• Do not damage the refrigerant circuit.
• Do not operate any electrical devices inside the appliance.
• Do not store explosive substances such as aerosol containers with flammable propellant in the appliance.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children unless they are older 8 years and supervised.
• NOTE: Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances.
• When positioning the appliance, ensure the supply cord is not trappedor damaged.
• Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.
• Do not try to repair the appliance on your own. Always contact an authorized technician. To avoid the exposure to danger, always have faulty cable be replaced only by the manufacturer, byour customer service or by qualified person and with a cable of the same type.
• Use the provided collection points of electrical equipment for the disposal of the appliance.

Coolant
WARNING: Risk of fire / flammable materials
The coolant circuit of this unit contains the refrigerant Isobutane (R600a), a natural gas that is flammable and of high environmental compatibility. Make sure no parts of the coolant circuit get damaged during transport and installation of the appliance.
If the coolant circuit is damaged:

• avoid any open flames or ignition source,
• disconnect the plug,
• thoroughly air the room in which the appliance is installed and
• contact an authorized technician.

Transport and packaging

Transport the appliance
Transport the appliance, if possible, in vertical position.
Otherwise, it is absolutely necessary to allow the appliance standing upright for a few hours before installation ”Prior to first use”.
Protect the appliance during transport against weather influences.
Unpacking the appliance

• Remove the appliance from its packaging.
• Remove all packaging material, such as foils, fillerand cardboard packaging.
  Dispose of packaging materials that are no longer required in accordance with the locally applicable regulations.
• To prevent hazards, check the appliance for any transport damage.
• In case of damage, do not put the appliance into operation. Contact your distributor.
  NOTE:
  Production residue or dust may have collected on the appliance. We recommend cleaning the appliance according to chapter “Cleaning and maintenance”.

Appliance equipment

Appliance overview
1 Temperature control / interior light
2 Glass shelves
3 Vegetable box
4 Feet
5 Door storage racks
Delivery scope
3x glass shelf, 1x vegetable box, 3x door storage rack, 2x egg tray, 1x door handle incl. fixing screws with covers, 1x rubber supporting pad

Installation

Conditions for the installation location

• Good ventilation is required around the appliance to dissipate the heat properly and to guarantee efficient cooling operation at low power consumption. Enough clearance is necessary.
  – Gap to the back approx. 50～70 mm, to the side walls and above the appliance each ap- prox. min. 100 mm;
  – Place the appliance so that the appliance door can open without being impeded.
• Only install at a location with an ambient temperature suitable for the climate class of the appliance.
  The climate class can be found under “Technical data” and on the rating label located in the interior or on the appliance rear.
• Place the appliance on a steady and safe surface. If the appliance is not horizontally leveled, adjust the feet accordingly.
• Avoid the installation:
  – near heaters, next to a stove, direct sunlight or any other heat sources;
  – at locations with high humidity (e. g. outdoors, bathroom), as metal parts would be suscepti- ble to corrosion under such circumstances;
  – near volatile or flammable materials (e. g. gas, fuel, alcohol, paint, etc.), in rooms which may have poor air circulation (e. g. garages).
  – Do not expose the appliance any weather.

Assembling the door handle

Remove the cover caps from the door outer side and tighten the handle with the delivered screws into the underlying holes. Put the included screw covers on.
Assembling the rubber supporting pad
CAUTION:
Under extreme circumstances, there is a risk that the appliance may tilt forward.
NOTE:
Installation of the rubber supporting pad is ONLY necessary if the interior is empty and the refrigerator door is loaded with 15 kg or more.Tilt the appliance slightly back and block it in this position.
Use the delivered screw to secure the supporting pad into the hole provided on the underside of the door.
Leveling the appliance
Slight unevenness in the floor can be leveled out using the front feet.
Check whether the appliance is leveled horizontally.
If the appliance is not in balance, the feet must be adjusted.

Electrical connection
WARNING:

• The installation to the mains supply must conform to the local standards and regulations.
• Improper connection may cause to an electric shock!
• Do not modify the appliance plug. If the plug does not fit properly to the outlet, let install a proper outlet by an authorized specialist.
• The accessibility of the power plug must be en- sured to disconnect the appliance from the power supply in case of emergency.
• Make sure that the voltage supply matches the specifications on the rating label before connecting.
• Connect the mains cable to a properly installed and earthed wall outlet.
• If the plug after installation is not accessible, a corresponding disconnect device must be availa- ble to meet the relevant safety regulations.

Reversing the door opening
If required, the door opening can be moved from the right (supplied condition) to the left side.
WARNING:
When replacing the door stop, the appliance must be disconnected from the power supply first.
NOTE:

• Ask another person to assist.
• You possibly need: screw wrench, Phillips screwdriver as well as a thin-blade screwdriver.
• Loosen the screws on the appliance back and remove the appliance cover.
• Dismount the upper door hinge and the screws (s). Lift the appliance door and set it safely aside.
• Tilt the appliance slightly backwards and block it in this position. Unscrew the feet and disassemble the lower door hinge.
• Transfer and attach the lower door hinge to the opposite appliance side. Screw in the feet accordingly.
• Put the appliance back in the upright position.
  Put on the appliance door and fix it its intended position.
• Transfer and attach the upper door hinge to the opposite appliance side after unscrewing the hinge pin and inserting it into the adjacent hole. Screw in the screws (s) on the opposite side.
• Replace the appliance cover and fix it.
• Dismount the door handle and attach it to the corresponding other door outer side. Refer to the instructions in “Assembling the door handle”.
  Transfer the cover caps on the exposed holes to the respective other door outer side.
  Check that the door is optimally aligned both vertically and horizontally to ensure smooth opening and closing of the door.

Startup / Operation

Intended use
The appliance is intended for private/household use.
It is suitable for cooling perishable foods such as milk, dairy products, meat, fish, eggs, margarine, various spreads and fruit and vegetables that are not sensitive to cold.
This cooling unit is not suitable for freezing food!
Prior to first use
CAUTION:
After transport, the appliance should be left standing upright for four hours before connecting to the power supply. Nonobservance could lead to malfunction of the cooling system and causes an appliance breakdown.
Clean the appliance interior including all accessory parts. Consider the instructions which we provide in the chapter “Cleaning and maintenance”.
Starting the appliance

• Connect the appliance to the power supply.
• Set the operating conditions. See also the following sections.

Settings
Position [ 0 ] means that the appliance is in the switched-off state. Turn the temperature control clockwise from this position, the appliance switches on automatically.
The power levels control the different values of the internal temperature.

Power level
1, 2	lowest level, warmest internal temperature
3, 4	medium level, optimal operating temperature
5, 6, 7*	highest level, coldest internal temperature

*Beware of high setting because the maximum level may already mean “freezing point”.
➨ Basically, the temperature changes depending on the ambient temperature (place of installation), the frequency of opening the door and the equipment.
For initial operation, first set the lowest possible internal temperature (= highest power level) until the appliance has reached the desired operating temperature.
It is recommended to reset to a medium power level afterwards, then you can easily make any temperature correction.
➨ Recommendation, for optimized food storage and to avoid food waste, a medium power level is generally best.
A high power level also increases energy consumption.
The recommended temperature in the center of the appliance is approx. 4∼7 degrees. If the temperature
in the center is correct, the different zones usually  also have the correct temperature.
Interior light
When opening the appliance door, the interior light will turn on automatically.
Equipment
Note that the equipment varies depending on the appliance type.
The various shelves and drawers can be height-adjusted (partially andmodel-dependent) or removed for individual storage.
Practical also for cleaning purposes.
NOTE:
For the most efficient use of energy, place all shelves/drawers in their original positions.
Removing / inserting the shelves

• To remove, open the unit door completely, lift the shelf, if necessary, slant slightly and pull it out to the front.
• Safely reinsert the shelf at the desired height and push it in until the stop is reached.

Removing / inserting the door racks

• To remove the door rack, hold the left side of the door rack and lift the right side at the same time until it is released from the retainer. Remove it.
• First insert the left side of the door rack. Then press the other side of the door rack into position until it engages in the retainer.

Removing / inserting the drawers

• To remove the drawer, pull it out to the front, incline it if necessary and remove it.
• Insert the drawer, if necessary, lift the front part of the drawer slightly and push it in completely.

Egg tray
Depending on the model, a tray for storing eggs is included with the appliances.
Storing food
NOTE: Recommendation!
To guarantee that the temperature is low enough, you should pre-cool the appliance a few times before initial loading foods.
CAUTION:
Always pay attention to the storage instructions on the sales packaging.
Always store food covered or packed to prevent drying-out and transfer of odor or taste onto other food items. You may pack the food with e.g.

• Polyethylene plastic bags or foil
• Plastic bowl with lid
• Special plastic cover with elastic strip
• Aluminum foil

To avoid contamination of food, respect the following instructions:

• Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.
• Clean regularly surfaces that can come in contact with food and accessible drainage systems (see “Cleaning and maintenance”).
• Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
• Two-star ** frozen-food compartments are suit- able for storing pre-frozen food, storing or making ice-cream and making ice-cubes.
• One-* , two-** or three-star *** compart- ments are not suitable for the freezing of fresh food.
• If the appliance is out of use for long period, follow the instructions under “Switching off“.

➨ Temperature zones and storage recommendations
The optimal cooling temperature is around 4∼7 degrees for the central area of the cooling.
Different cooling zones are created by the air circulation. Regardless of the power level, cold air drops off.

• The coldest zone is on the cooling rear wall and inthe lower cooling part. Recommended for storing perishable foods such as meat, fish and sausagesat around 2∼3 degrees.
• About that it becomes less cold. For dairy products such as yoghurt, cheese and co., the center of the cooling is just the right temperature at around 4∼7 degrees.
• Well-packed leftovers or preserves needs less cooling. The upper cooling part at around 6∼8 degrees could be the right place.
• The cooling door is one of the warmest locations. The upper racks are good location for food that needs moderate cooling, such as butter and eggs.There is space for drinks in the lower door racks.
• The vegetable box (depending on model) is suitable for fruit and vegetables at a temperature of around 8 degrees, depending on the cooling temperature. To make especially delicate fruits and vegetables feel comfortable, a glass shelf above the drawers retains the falling cold and prevents moisture loss.

Operating noise

Type of sound	Cause
Mumbling	Compressor during its operation
Liquid sounds	Circulation of the refrigerant
Click sounds	The temperature control turns the compressor on or of
Disturbing noises	Vibration of the shelves or cooling coils

Switching off
To switch off the appliance turn the temperature control to the off state.
If the appliance is out of use for long periods:

• Remove the appliance content.
• Disconnect the appliance from the power supply.
• Defrost (model dependent) and clean the appliance thoroughly (see ”Cleaning and maintenance”).
• Leave open the appliance door to avoid formation of mold and unpleased odor.

Tips for energy saving

• Disconnect the appliance from the power supply if it isn’t in use.
• Do not install the appliance near stoves, heaters or other heat sources. In case of higher ambient temperatures, the compressor will run more frequently and longer.
• Ensure enough ventilation at the bottom and rear side. Never block ventilation openings.
• Place all shelves, racks or drawers (depending on model) in their original position.
• Adjust the temperature not colder than necessary.
• Allow warm food to cool before placing it in the appliance.
• Open the appliance door only as necessary.
• Defrost the unit regularly (model dependent).
• The seal of the appliance door must be com- pletely intact, so that the door closes properly.

Cleaning and maintenance

WARNING:

• Always disconnect the appliance from the power supply before cleaning and user maintenance.
• Do not use steam cleaners for cleaning the appliance; moisture could enter electrical components.
  Risk of electric shock! Hot steam could damage the plastic parts.
• The unit must be dry before restarting operation.

 

CAUTION:

• Do not use a wire brush or other sharp, abrasive items.
• Do not use any acidic or abrasive detergents.
• Do not damage the refrigerant circuit.

Cleaning the appliance including interior
To keep dirt and germs at bay, clean the appliance regularly!

• First clear out the contents of the appliance and store it in a cool place. Remove all moving parts such as shelves and drawers.
• Clean the interior of the appliance, the exterior surfaces and the accessories with lukewarm water and a mild cleaning agent; or with a clean, damp microfiber cloth without cleaning agent.
• Clean the thaw water discharge channel / opening carefully e. g. with a pipe cleaner.
• After everything has dried thoroughly, you can put the appliance back into operation.
• Depending on the model: At least once a year, wipe off the dust that has accumulated on the rear wall of the unit and on the condenser (metal grille). Use a soft brush or a vacuum cleaner for this purpose.

Cleaning / replacing the door seal
Regularly check the seal for dirt, damage and air tightness!

Checking the seal for air tightness

• Clamp a thin piece of paper at various points for testing. The paper must be equally difficult to pull through at all points.

Cleaning the gasket

• Clean the gasket with clear water only!
• CAUTION, grease and oil makes the seal porous and brittle. Wipe up grease or oil immediately with a damp, clean cloth.

Replacing the seal

• Remove the contents of the appliance and, if necessary, defrost the unit. Pay attention to how the old gasket is attached. Most gaskets are only plugged in.
• Remove the worn gasket rubber by removing it from the groove. Carefully clean the appliance door and the groove below the rubber and remove any adhesive residue.
• Attach the new rubber. If necessary, heat the rubber seal with a hair dryer or hot water and shape it by hand. Start pressing the gasket in one corner and then press it around the door into the groove provided for this purpose.
• Continue to check the seal regularly for dirt and damage!

Defrosting
CAUTION:
Never use metal objects (e. g. knifes) to remove ice from the evaporator. Otherwise, it can be damaged.
During defrosting water drops drains off at the back of the cooling chamber. The thaw water running through a channel, is collected in a drip tray located on the compressor, where it will evaporate. Make sure the water discharge opening does not get clogged. A light formation of ice on the interior back during operation is normal.
A permanently high power level can lead to increased ice formation → set a lower power level and wipe the interior of the appliance dry.
Changing the light
CAUTION:
Do NOT remove the cover of the light. The LED light may be replaced / repaired in case of failure / defect only by an authorized specialist.
Replacing the door hinge
If the appliance door starts to stutter, crack or jam when you open it, it is probably due to a worn or damaged hinge.
It is recommended to replace all door hinges at the same time, otherwise the next repair will soon be beckoning.

• Remove the contents of the appliance and the movable interior parts.
• Tilt the appliance backwards and block it in this position to prevent the door from sliding out.
• Loosen the appliance cover as described under “Reversing the door opening” and disassemble the upper door hinge.
• Turn out the stand and disassemble the lower door hinge.
• The respective hinge assembly is carried out in reverse order.
• Open and close the appliance door for a test run, readjust the hinges if necessary. In any case, make sure that the door fits tightly and accurately.

Replacing the door handle
A malfunction due to too active use, may cause damage to the door handle.

• Loosen the screw cover caps.
• Unscrew the screws underneath and remove the door handle. 
• The door handle is mounted in the reverse sequence, see also “Assembling the door handle”.

Troubleshooting

Before you contact an authorized specialist

Problem / cause / action

Appliance is not working properly or at all

– Check the power supply / temperature setting / ambient temperature. – Unblock the ventilation openings, install the appliance freely.

Loading is too warm

– Check the temperature setting / ambient temperature. -A large quantity of warm food has been stored in the unit in the last 24 hours. – The appliance door is not closed properly, check the door seal.

Loud noise during operation

– Check that the appliance is level. – See “Operating noise”.

Water on the appliance bottom

– Check the temperature setting / water discharge channel or opening.

Light does not work

– Check the power supply. – See “Changing the light”.

NOTE:
If a problem persists after following the steps above, contact your trader or an authorized technician.

Technical data

Climate class SN/N/ST/T: this appliance is intended to be used at ambient temperature ranging from 10°C to 43°C.
Electrical connection……………………………………..
Power voltage: …………………….220-240 V~ / 50 Hz
Rated (defrost) power: …………………..……..…70 W
Rated current: …………………………..…..……….0.4 A
Dimension H x W x D / weight…..…….………………..
Appliance size: ……..……………84.5 x 56.0 x 57.5 cm
Net weight: ……………………….……approx. 28.0 kg
For more information about the product, scan the QR code on the supplied energy label and/or visit the official website of the product data bank: https://eprel.ec.europa.eu 
The right to make technical and design modifications during continuous product development remains reserved.
This appliance has been tested according to all relevant current  CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations.

Disposal

Meaning of the “Dustbin” symbol Protect our environment; do not dispose of electrical equipment in the domestic waste.
Please return any electrical equipment that you will no longer use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on the environment and human health.
This will contribute to the recycling and other forms of reutilization of electrical and electronic equipment.
Information concerning where these can be disposed of can be obtained from your local authority. Your dealer and contractual partner is also obliged to take back the old appliance free of charge.
WARNING:
Remove or disable any existing snap and bolt locks if you take the appliance out of operation or dispose it.

C. Bomann GmbH
www.bomann-germany.de
Made in P.R.C.
Stand 06/2023

Documents / Resources

BOMANN VS 2195.1 Household Larder Refrigerator [pdf] Instruction Manual 2195.1, VS 2195.1 Household Larder Refrigerator, Household Larder Refrigerator, Larder Refrigerator, Refrigerator

References

• elektro-service.de
• Bomann Startseite
• Bomann Startseite
• Bomann Service
• User Manual