STIEBEL ELTRON Ultronic-1 Plus Touchless Automatic High Speed Hand Dryers
Product Information
Specifications
- Brand: UltronicTM
- Model: Plus & Premium Hand Dryers
- Website: www.stiebel-eltron-usa.com
Product Usage Instructions
General Information
Before operating the appliance, please read through the safety instructions and other symbols in the documentation. Ensure you are familiar with the units of measurement used.
Safety
Intended Use: Make sure to use the appliance only for its intended purpose as described in the manual.
General Safety Instructions: Follow all safety guidelines provided to ensure safe operation of the appliance.
Test Mark: Check for the test mark to ensure the appliance meets safety standards.
Register Your Product
Register your product for warranty purposes and to stay updated on product information.
Appliance Description
Understand the components and features of the appliance for effective use.
Operation
Follow the operation instructions carefully to use the appliance efficiently.
Cleaning, Care, and Maintenance
Regularly clean and maintain the appliance as per the guidelines provided to ensure longevity and optimal performance.
Troubleshooting
Refer to the troubleshooting section in case of any issues with the appliance.
Installation
General Safety Instructions: Follow all safety guidelines during the installation process.
Instructions, Standards, and Regulations: Adhere to the installation standards and regulations for safe setup.
Appliance Description
Review the standard delivery components to ensure all parts are included.
Preparation
Installation Site: Choose an appropriate location for installation as per the guidelines.
Minimum Clearances: Maintain minimum clearances around the appliance for proper ventilation and operation.
Guidelines for Installation Height: Follow the recommended height guidelines for installation.
Cleaning and Maintenance
Cleaning: Regularly clean the appliance following the provided instructions.
Changing the HEPA Filter: Replace the HEPA filter as recommended to maintain air quality.
Specification
12.1 Dimensions and Connections: Refer to the specifications for details on dimensions and connections.
12.2 Data Table: Check the data table for additional information on the appliance.
Frequently Asked Questions
Q: Can children use the appliance?
A: Children aged 8 and older can use the appliance under supervision and with proper instruction on safe operation. Children below 8 should not operate or handle the appliance unsupervised.
Touchless Automatic High-Speed Hand Dryers
Ultronic™-1 Plus
Certified to ANSI/UL Std. 50
Conforms to CAN/CSA Std. C22.2 No.113
SPECIAL INFORMATION
- Keep children under the age of 3 away from the appliance if constant supervision cannot be guaranteed.
- Children from the age of 3 to 7 may switch the appliance on and off, provided they are supervised or have been instructed in the safe operation of the appliance and understand any risks that may result. This is subject to the appliance having been installed as described. Children from the age of 3 to 7 must not plug the power cable into its socket or regulate the appliance.
- The appliance may be used by children aged 8 and older and persons with reduced physical, sensory or mental capabilities or a lack of experience and know-how, provided that they are supervised or they have been instructed on how to use the appliance safely and have understood the potential risks. Children must never play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision.
- Parts of the appliance can get very hot and may cause burns. Particular caution is advised when children or vulnerable persons are present.
- To prevent the appliance from overheating, never cover it with anything.
- Never install the appliance directly below a wall socket.
- In the case of a permanent connection, ensure the appliance can be separated from the power supply by an isolator that disconnects all poles with at least 3 mm contact separation.
- The specified voltage must match the power supply.
- The appliance must be connected to the ground conductor.
- To prevent hazards, the power cable must only be replaced (for example if damaged) by a qualified contractor authorized by the man-ufacturer, using an original spare part.
- Secure the appliance as described in chapter “Installation / Installation”.
- This manual may also be downloaded at: www.stiebel-eltron-usa.com/installation-manuals
OPERATION
General information
The chapters “Special information” and “Operation” are intended for appliance users and qualified contractors.
The chapter “Installation” is intended for qualified contractors.
Note
Read these instructions carefully before using the appli-ance and retain them for future reference.
Pass on these instructions to a new user if required.
Safety instructions
Structure of safety instructions
KEYWORD Type of risk
Here, possible consequences are listed that may result from failure to observe the safety instructions.
Steps to prevent the risk are listed.
Safety
Intended use
The appliance is used to dry wet hands.
The appliance is intended for domestic use. The unit can be used safely by untrained persons. The appliance can also be used in non-domestic environments, e.g. in commercial and industrial applications, as long as it is used in the same way.
Any other use beyond that described shall be deemed inappro-priate. Observation of these instructions and of the instructions for any accessories used is also part of the correct use of this appliance.
General safety instructions
CAUTION Burns
- Do not lean any objects against the appliance.
- Never place any flammable, combustible or insulat-ing objects or materials on the appliance or in direct proximity to it.
- Ensure that the air intake and discharge on the un-derside of the appliance are never blocked.
WARNING Electrocution
Never insert any object into appliance openings.
WARNING Injury
- Keep children under the age of 3 away from the appliance if constant supervision cannot be guar-anteed.
- Children from the age of 3 to 7 may switch the ap-pliance on and off, provided they are supervised or have been instructed in the safe operation of the appliance and understand any risks that may result. This is subject to the appliance having been installed as described. Children from the age of 3 to 7 must not plug the power cable into its socket or regulate the appliance.
- The appliance may be used by children aged 8 and older and persons with reduced physical, sensory or mental capabilities or a lack of experience and know-how, provided that they are supervised or they have been instructed on how to use the appli-ance safely and have understood the potential risks.
- Children must never play with the appliance. Clean-ing and user maintenance must not be carried out by children without supervision.
CAUTION Burns
Parts of the appliance can get very hot and may cause burns. Particular caution is advised when children or vulnerable persons are present.
Register your product
CAUTION UV light exposure
The unit has a built-in antimicrobial UV-C lamp. Avoid direct eye contact with the UV-C lamp.
WARNING Burns
Never operate this appliance…
- if the distance from adjacent objects or other flam-mable materials would be less than the minimum permissible distance.
- in rooms where it is at risk of fire or explosion as a result of chemicals, dust, gases or vapors. Ensure the room is adequately ventilated before using the appliance.
- in the direct proximity of pipes or receptacles that carry or contain flammable or explosive materials.
- if an appliance component is damaged, the appli-ance has fallen over or there is a fault.
WARNING Overheating
To prevent the appliance from overheating, never cover it with anything.
Test mark
See type plate on the appliance. The type plate is located on the back of the appliance.
Register your product
You must register this product within 90 days of purchase on our website in order to activate the standard warranty or to be eligible for the extended warranty. Go to our web site at: www.stiebel-eltron-usa.com and click on Register Your Product.
Before beginning the registration process, we suggest that you gather the necessary information which will be as follows:
- Type, Example: Ultronic-1 Premium (from the label that is on the back of the unit)
- Number listed after “Nr.”
- Place of Purchase
- Purchase Date
- First & Last Name
- Email address
- Physical Address
- Phone Number
- IF YOU HAVE ANY QUESTIONS CONCERNING THE REGISTRA-TION PROCESS OR WARRANTY OPTIONS, PLEASE CONTACT STIEBEL ELTRON USA DIRECTLY AT (800)-582-8423.
Appliance description
Appliance description
- The appliance works without contact. If you hold your hands in the IR sensor detection range, the appliance fan is automatically enabled.
- The appliance dries hands by removing the moisture with a con-centrated jet of air. A switchable heating element increases your comfort during hand drying.
- When you move your hands away from the IR sensor detection range, the appliance stops automatically.
- Additional hygiene is provided by the HEPA filter and the air clean-ing function with UV-C light and ion generator. The appliance reliably removes dust, pollen, bacteria and viruses from the in-door air.
- In silent mode, the appliance operates more quietly with a reduced fan speed.
- The switchable heating element, air cleaning function and silent mode can be activated and deactivated by a qualified contrac-tor (see chapter “Installation / Activating/deactivating appliance functions”).
Operation
- Shake your wet hands over the washbasin before drying to reduce the drying time.
- Hold your hands under the air outlet.
- Move your hands slowly back and forth in the airflow.
- The blue LED on the underside of the appliance flashes during operation. When you move your hands away from the IR sensor detection range, the appliance stops automatically.
- When used without interruption, the appliance stops automatically after approx. 50 seconds to avoid constant operation.
- When the air cleaning function is activated, it switches on auto-matically during operation.
- LED indicator on the front of the appliance
Cleaning, care and maintenance
- Property damage
Ensure that no moisture can enter the appliance. - Property damage
- Unsuitable cleaning agents may damage the appliance casing.
- Never use abrasive or corrosive cleaning agents.
- Wipe the appliance casing regularly with a soft, damp cloth. ?C?lean the air intake area on the underside of the appliance regularly with a brush.
Troubleshooting
If you cannot solve the problem, contact your qualified contractor. To facilitate and speed up your inquiry, please provide the serial number from the type plate (000000-0000-000000).
INSTALLATION
Safety
Only a qualified contractor should carry out installation, commis-sioning, maintenance and repair of the appliance.
General safety instructions
We guarantee trouble-free functional and operational reliability only if original accessories and spare parts intended for the ap-pliance are used.
Instructions, standards and regulations
Note
Observe all applicable national and regional regulations and instructions.
Appliance description
Standard delivery
The following are delivered with the appliance:
- Wall mounting bracket (fitted on the appliance)
- HEPA filter
- Torx key
- Spare screw
- 3 screws and 3 rawl plugs to secure the wall mounting bracket
- Cable cover with 2 screws
- Drilling template (in the center section of these instructions)
Preparation
Installation site
Property damage
The appliance is exclusively designed for indoor instal-lation. The appliance can be damaged if it is exposed to the elements.
Note
The appliance must be installed flush against a wall with sufficient load bearing capacity.
- Mount the appliance only on a vertical wall.
Preparation
Installation in bathrooms
WARNING Electrocution
Only install the appliance outside safety zone 2.
Minimum clearances
Maintain the minimum clearances to adjacent object surfaces to ensure trouble-free operation.
Guidelines for installation height
Note
The height indicates the distance between the top drill holes and the floor.
Installation
Fitting the wall mounting bracket
The appliance is intended for wall mounting using the wall mount-ing bracket supplied.
Place the appliance on a soft underlay to prevent damage to the surface.
- Undo the locking screw on the underside of the appliance using the Torx key included in the standard delivery.
- Pull the wall mounting bracket downwards.
- Remove the wall mounting bracket from the appliance.
Note
When positioning the wall mounting bracket, ob-serve the position and length of the power cable.
Note
Use the relevant standard values as a guide for the installation height (see chapter “Preparations / Stan-dard values for the installation height”).
Property damage
If you hit electrical cables when drilling, the circuit break-er will trip and the cable will be damaged. If you hit pipes when drilling, there is a risk of water damage.
Make sure that you do not damage any electrical cables or pipes when drilling.
template (in the center section of these instructions) or the wall mounting bracket.
Drill the holes and insert the provided rawl plugs.
- Electrical connection
- WARNING Electrocution
Carry out all electrical connection and installation work in accordance with national and regional regulations. - WARNING Electrocution
In the case of a permanent connection, ensure the appliance can be separated from the power supply by an isolator that disconnects all poles with at least 3 mm contact separation. - WARNING Electrocution
Ensure that the appliance is connected to the ground conductor. - Property damage
Observe the type plate. The specified voltage must match the mains power supply. - Property damage
When making the connection to a standard safety socket (in the case of a power cable with mains plug), ensure that the socket is freely accessible after the appliance has been installed.
The power supply can be connected directly to the appliance or via a power cable with mains plug.
- Cable entry
- Cable duct
Note
Make sure the length of the power cable is sufficient to pass correctly through the wall mounting bracket to the terminal.
- Route the power cable from the back through the cable grommet of the wall mounting bracket.
- Connect the power cable to the mains terminal according to the markings.
- Lay the power cable in the cable duct.
- Cable exit
- Strain relief fittings
- If the power cable is routed through the cable exit, route the connecting cable through the 3 integral strain reliefs on the back of the wall mounting bracket.
- Secure the wall mounting bracket to the wall with the provid- ed screws.
- Secure the cable cover to the wall mounting bracket.
Opening the appliance
Remove the casing cover to insert the HEPA filter or to set the appliance functions.
If you want to start the appliance directly, you can continue the installation by following the chapter “Installing the appliance”.
Use a suitable screwdriver to unscrew the Phillips screws on the back of the appliance.
- Remove the casing cover from the appliance
Inserting the HEPA filter
To unlock the filter casing, turn it in the direction indicated on the filter casing (OPEN) and remove the filter casing.
Insert the filter into the filter casing.
- Replace the filter casing on the motor. Align the point on the filter casing with the upper groove on the motor cover.
- Turn the filter casing in the direction indicated on the filter casing (CLOSE) until you hear it click into place.
CAUTION UV light exposure
The unit has a built-in antimicrobial UV-C lamp. Avoid direct eye contact with the UV-C lamp.
- Air cleaning function
- Heating function
- Silent mode
Switch the required functions on or off using the DIP switch.
Fitting the casing cover
Place the casing cover on the back panel of the appliance.
Check that the casing cover is seated correctly on the appliance.
Tighten the Philips screws on the back of the appliance.
WARNING Electrocution
Do not forget to screw on the grounding connection screw. The grounding connection screw is located on the rear of the unit in the upper right-hand corner.
Installing the appliance
- Position the appliance centrally over the wall mounting bracket so the metal retainer on the back of the appliance is above the fixture of the wall mounting bracket.
- Press the appliance against the wall and slowly push the appliance down as far as it will go.
- On the underside of the appliance, fasten the locking screw into the wall mounting bracket using the provided Torx key.
- Switch on the power supply or insert the mains plug on the power cable, if fitted, into the standard safety socket.
- The LED on the front of the appliance flashes red three times, then lights up white. The unit is ready for operation.
- Check the appliance function.
Appliance handover
- Explain the functions of the appliance to the user.
- Draw special attention to the safety instructions.
- Hand over these operating and installation instructions to the user.
Cleaning and maintenance
WARNING Electrocution
Before any work on the appliance, disconnect all poles from the power supply.
- Before starting any cleaning and maintenance work, remove the appliance from the wall mounting bracket
- Undo the locking screw on the underside of the appliance using the provided Torx key.
- Lift the appliance off the wall mounting bracket.
- Make sure that the LED on the front of the appliance is off before you open the appliance.
Cleaning
The interior of the appliance must be cleaned regularly to remove dust deposits.
- Open the appliance (see chapter “Installation / Opening theappliance”).
- Remove the dust from inside the appliance.
- Fit the casing cover (see chapter “Installation / Fitting the casing cover”).
- Hang the appliance on the wall mounting bracket (see chapter “Installation / Installing the appliance”).
Changing the HEPA filter
Note
A built-in filter must be replaced after 60,000 applica-tions. The appliance can still be operated, but without the effectiveness of a HEPA filter. After approx. 75,000 ap-plications, the LED on the front of the appliance flashes red. The appliance cannot be operated again until a new filter is inserted.
The HEPA filter is available as a spare part, item no. 205638.
- Open the appliance (see chapter “Installation / Opening the appliance”).
- Replace the filter (see chapter “Installation / Installing the HEPA filter”).
- Fit the casing cover (see chapter “Installation / Fitting the casing cover”).
- Hang the appliance on the wall mounting bracket (see chapter “Installation / Installing the appliance”).
Specification
Dimensions and connections
Data table
WARRANTY
- RESIDENTIAL & COMMERCIAL WARRANTY: STIEBEL ELTRON WARRANTS TO THE ORIGINAL OWNER THAT THE GALAXY* OR ULTRONIC*
- THE TOUCHLESS AUTOMATIC HAND DRYER WILL BE FREE FROM DEFECTS IN WORKMANSHIP AND MATERIALS FOR A PERIOD OF FIVE (5) YEARS FROM THE DATE OF PURCHASE. SHOULD THE PARTS) PROVE TO BE DEFECTIVE UNDER NORMAL USE DURING THIS PERIOD, STIEBEL ELTRON, INC. WILL BE RESPONSIBLE FOR REPLACEMENT OF THE DEFECTIVE PART(S) ONLY. STIEBEL ELTRON, INC. IS NOT RESPONSIBLE FOR LABOR CHARGES TO REMOVE AND/OR REPLACE THE DEFECTIVE PART(5), OR ANY INCIDENTIAL OR CONSEQUEN- TIAL EXPENSES.
- SHOULD THE OWNER WISH TO RETURN THE HAND DRYER FOR REPAIR, THE OWNER MUST FIRST SECURE WRITTEN AUTHORIZATION FROM STIEBEL ELTRON, INC. THE OWNER SHALL BE REQUIRED TO SHOW PROOF OF PURCHASE DATE, AND TO PAY ALL TRANSPORTA- TION COSTS TO RETURN THE DEFECTIVE PART(S) OR HAND DRYER FOR REPAIR OR REPLACEMENT. WARRANTY IS VOID IF WATER HEATER HAS BEEN INSTALLED OR USED IMPROPERLY OR IF DESIGN HAS BEEN ALTERED IN ANY WAY.
Environment and recycling
We would ask you to help protect the environment. After use, dispose of the various materials in accordance with national reg-ulations.
This Warranty is valid for U.S.A. & Canada only. Warranties may vary by country. Please consult your local Stiebel Eltron represen-tative for the Warranty for your country.
Documents / Resources
 |
STIEBEL ELTRON Ultronic-1 Plus Touchless Automatic High Speed Hand Dryers [pdf] Instruction Manual Ultronic-1 Plus, Ultronic-1 Plus Touchless Automatic High Speed Hand Dryers, Touchless Automatic High Speed Hand Dryers, Automatic High Speed Hand Dryers, High Speed Hand Dryers, Hand Dryers, Dryers |
Tankless Water Heater | Renewable Energy | Stiebel Eltron USA 