JADEMAR JPHBS-CPS and PS Series Premium IP65 and IP67K Round High Bay Instructions

JADEMAR JPHBS-CPS and PS Series Premium IP65 and IP67K Round High Bay

Product Information

Specifications:

• Product Name: JPHBS-CPS & PS SERIES
• Type: Round High Bay Luminaire
• IP Rating: IP65/ IP67K
• CCT (Correlated Color Temperature) Selectable: 40K/50K
• Power Selectable Options:
  • Option 1: 150W/120W/100W
  • Option 2: 240W/200W/180W
  • Option 3: 310W/280W/240W
• Voltage: 120-277/347Vac
• Frequency: 50/60Hz

Product Usage Instructions

Suspended Mount – Installation Instructions:

1. First, fix the hook on the lamp by rotating it clockwise.
2. Connect the hook with the lock ring.
3. Use an electric drill to bore a hole on the wall.
4. Fix the hanger on the wall using screws.
5. Fix one end of the chain to the wall and the other end to the O/G hook from the light.
6. Finish the installation.

Ceiling Mount – Installation Instructions:

1. Use an electric drill to bore a hole on the wall.
2. Install the expansion screw into the existing hole.
3. Fix the U bracket to the wall using a nut, plain cushion, and spring shim.
4. Use a wrench to reverse the hex nut and adjust the required angle.

Power & CCT Selectable:
Option 1:

• Power Selectable: 150W/120W/100W
• CCT Selectable: 40K/50K

Option 2:

• Power Selectable: 240W/200W/180W
• CCT Selectable: 40K/50K

Option 3:

• Power Selectable: 150W/120W/100W/310W/280W/240W
• CCT Selectable: 40K/50K

Wiring Diagram:

• Live – Connect to live wire
• Neutral – Connect to neutral wire
• Ground – Connect to the ground wire
• LED Light – Connect to the LED light fixture 120-277/347Vac – Connect the power supply within this voltage range and frequency 0-10V Dimmer control – Follow the dimmer control manufacturer instructions for dimming control

FAQ:

• Q: What is the IP rating of the JPHBS-CPS & PS SERIES luminaire?
  A: The luminaire has an IP rating of IP65/ IP67K, indicating its resistance to dust and water ingress.
• Q: Can I adjust the power and CCT settings of the luminaire?
  A: Yes, the luminaire offers power and CCT selectability. You can choose different power options (e.g., 150W/120W/100W, 240W/200W/180W, or 310W/280W/240W) and CCT options (40K/50K) based on your requirements.
• Q: How do I install the luminaire for suspended mounting?
  A: Follow these steps for suspended mounting:
  • Fix the hook on the lamp by rotating it clockwise.
  • Connect the hook with the lock ring.
  • Bore a hole on the wall using an electric drill.
  • Fix the hanger on the wall using screws.
  • Attach one end of the chain to the wall and the other end to the O/G hook from the light.
  • Complete the installation.
• Q: What voltage and frequency does the luminaire support?
• A: The luminaire supports a voltage range of 120-277/347Vac and a frequency of 50/60Hz.

WARNING: BEFORE YOU BEGIN READ THESE INSTRUCTIONS COMPLETELY AND CAREFULLY.

BEFORE YOU BEGIN

• To reduce the risk of death, personal injury, or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards please read all warnings and instructions included with and on the fixture box and all fixture labels.
• Before installing, servicing, or performing routine maintenance on this equipment, follow these general precautions.
• Commercial installation, service, and maintenance of luminaires should be performed by a qualified licensed electrician.
• For Residen al installed on: If you are unsure about the installation or maintenance of the luminaires, consult a qualified licensed electrician and check your local electrical code.
• Maintenance of the luminaires should be performed by a person(s) familiar with the luminaires’ construction and operation and any hazards involved. Regular fixture maintenance programs are recommended.
• This fixture is intended to be connected to a properly installed and grounded UL-listed junk on the box.
• It will occasionally be necessary to clean the outside of the refractor/lens. The refractor/lens should be washed in a solution of warm water and any mild, non-abrasive household detergent, rinsed with clean water, and wiped dry. Should the op cal assembly become dirty on the inside, wipe the refractor/lens and clean in the above manner, replacing damaged gaskets as necessary.
• DO NOT INSTALL DAMAGED PRODUCT! This luminaire has been properly packed so that no parts should have been damaged during transit. Inspect to confirm.
• Any part damaged or broken during or after assembly should be replaced.
• These instructions do not purport to cover all details or varia ons in equipment nor to provide every possible contingency to meet in connect on with installed, on, opera on, or maintenance. Should further information be desired, or should particular problems arise that are not covered sufficiently for the purchaser’s or owner’s purposes, this matter should be referred to the manufacturer

SUSPENDED MOUNT – INSTALLATION INSTRUCTIONS

1.  First, fix the hook on the lamp (rotate clockwise) then connect the hook with the lock ring.
2. Use an electric drill to bore a hole in the wall.
3. Fix the hanger on the wall with screws.
4. Fix one end of the chain to the wall, and another end to the O/G hook from light, and finish the installation.

CEILING MOUNT

1. Use electric drill to bore a hole on the wall
2. Install the expansion screw to the exis ng hole.
3. Fix the U bracket to the wall by nut, plain cushion, and spring shim.
4. Use a wrench to reverse the hex nut and adjust the required angle.

POWER & CCT SELECTABLE

WIRING DIAGRAM

Miami, FL USA – info@jademar.com T: 305.640.0465 – F: 305.640.0468
WWW.JADEMAR.COM

Documents / Resources

JADEMAR JPHBS-CPS and PS Series Premium IP65 and IP67K Round High Bay [pdf] Instructions JPHBS-CPS and PS Series Premium IP65 and IP67K Round High Bay, JPHBS-CPS, and PS Series Premium IP65 and IP67K Round High Bay, Series Premium IP65 and IP67K Round High Bay, Premium IP65 and IP67K Round High Bay, IP67K Round High Bay, Round High Bay, High Bay

References

• Jademar Lighting 💡 Manufacturers of Energy Efficient Lighting Fixtures
• User Manual