OPT7 B07VXLNB72 Aura Double Row Car LED Lights Interior
MAIN COMPONENTS
INSTALLATION
STEP 1
Decide where to locate the light strips and ensure the wiring has enough length for the control box to be installed in the desired location. As shown below, connect all light strips to the control box with the included extension cables. 
WARNING
- Connecting to more than 10 AMP will override the kit and cause early failure, ensure it is 10AMPs or less!!
- Please ensure that the LED bars or strips/control box/wiring all are mounted in areas that will not exceed 85°C or 185°F.
Once connected, plug the control box Cigarette Power Adapter into an available 12-volt charging port.
STEP 2
Secure the Control box in the desired location with Velcro or zip ties.
- CONTROL BOX NOT WATERPROOF Ensure the control box is safely and securely hidden from exposing elements of moisture.
STEP 3
Thoroughly clean the surface where you plan on mounting the LED strip with rubbing/isopropyl alcohol. (This part is essential for a rm and long-lasting placement.
A dirty surface will prevent the strip from attaching firmly. Peel the double-sided tape firmly press the LED strip to the mounting area and hold for 3 seconds. Then, use the zip-ties to tie all the wirings away from all moving components.
IMPORTANT
BE SURE TO CONFIRM THE CORRECT DIRECTION OF THE ARROW!! TO AVOID PRODUCT DAMAGE DUE TO INCORRECT INSTALLATION.
STEP 4
Using the included 21 Key E-Z Remote, select your desired colour or pattern.
Note: When you use this product, keep it within 10m/33ft as much as possible )
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation. If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance. OPT7 recommends installation for safety and guidance. Modified installations or installation recommendations not specified by OPT7 Lighting will void the product warranty.
Specifications
- Product Name: Double Row Interior LED Light Kit
- Components: LED Strips, Mounting Kit, Aura Control Box, Hand Held Remote, Extension Wires, Cigarette Lighter Power Adapter
- Power Requirement: 12V
- Remote Control Range: Up to 10m/33ft
- Color Options: 9 Colors
- Operating Temperature: 85°F or 185°F
FAQ
Q: What should I do if I exceed the recommended AMP limit?
A: Exceeding the 10 AMP limit may cause early failure. Ensure not to connect to more than 10 AMPs to prevent issues.
Q: Can the LED strips be cut to fit a specific length?
A: Cutting the LED strips may damage them. It is recommended to use them as provided without cutting.
Documents / Resources
 |
OPT7 B07VXLNB72 Aura Double Row Car LED Lights Interior [pdf] Installation Guide B07VXLNB72, B01K2ZPVMO, B01F612W4E, B01K2ZPS3G, B00OU5LOT2, B07VXLNB72 Aura Double Row Car LED Lights Interior, B07VXLNB72, Aura Double Row Car LED Lights Interior, Double Row Car LED Lights Interior, Car LED Lights Interior, LED Lights Interior, Lights Interior, Interior |
