HOOKE ROAD BXG.3055 JL 6 Wide Front and Rear Fender Flares Kit with LED Turn Signal Lights User Manual

• Model: BXG.3055
• Front Fender Flare Size(mm): M6*20
• Rear Fender Flare Size(mm): M6*35
• Installation Time: About 1.5 hours
• Tools Required: Drive Socket Ratchet Wrench, 4mm Hex Bit Socket, Rivet Nut Tool, 10mm Wrench, 10mm Shallow Socket

Product Usage Instructions

Installation OverviewBefore starting the installation process, ensure all parts are present and carefully read the instructions.

Driver Side Front Fender Flare Installation

1. Remove factory fender liners.
2. Align the fender flare with side holes and secure using M6*20 hex socket screws and nuts.
3. No nuts are needed for holes with rivets.

Driver Side Rear Fender Flare Installation

1. Remove factory fender liners.
2. Install rivets in all side holes.
3. Secure the rear fender flare using M6*35 screws for all holes.
4. Repeat the process on the passenger side.

Fender Flare Lighting Wiring Installation

• Negative Electrode (Black Wire) – Factory Black Wire
• Turn Lamp (Red Wire) – Factory White Yellow Wire

Note: Wiring methods may vary based on models.

Upon completion of the above steps, the installation is finished. Enjoy your off-road adventures with the Hooke Road product!

• A: If you find any missing parts, please contact your distributor for assistance.

Q: How long does the installation process usually take?

• A: The installation typically takes about 1.5 hours with the assistance of 2-3 people. Individual skill levels may affect installation time.

Q: Can the wiring harness connection be modified based on vehicle models?

• A: Yes, wiring harness colors may vary among different models, but the wiring methods remain the same. Follow the provided instructions for proper connection.

Contents

Tools required

• a. Drive Socket Ratchet Wrench;
• b. 4mm Hex Bit Socket;
• c. Rivet Nut Tool;
• d. 10mm Wrench;
• e. 10mm Shallow Socket;
• Hand Rivet Nut Tool (Package Included)

Installation time

• About 1.5 hours, 2-3 people may be needed. Installation time may differ according to your mechanical skill level.
• (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)
• To view the electronic version (BXG.3055), please scan the QR code.

Installation instruction

Driver Side Front Fender Flare Installation

• Step 1: Before installation, please remove the factory fender liners in preparation for installing our product.
• Step 2: Due to the inability to install nuts in the side screw holes, you need to manually insert a rivet using a hand riveting tool at the side mounting location.
• The rivet nut tool instruction: Place the nut or insert it into the hole, making sure it fits snugly. Position one end of the hand rivet tool onto the nut or insert, and use the tool’s handle to squeeze and compress it.
• This will create even pressure around the nut or insert, securing it firmly in place. Once finished, you can thread a bolt or screw into the nut or insert it to securely fasten objects together.

Required Tools: 10mm Shallow Socket & 10mm Wrench;

• Step 3: Next, it is recommended to begin by installing the side holes. Lift the fender flare to align it with the side holes, then secure it in place directly using M6*20 hex socket screws and nuts.
• No nuts are required for the holes where rivets have been used.
• Step 4: Installation of driver’s side front fender flare completed.

Driver Side Rear Fender Flare Installation

• Step 5: Before installation, please remove the factory fender liners in preparation for installing our product.
• Step 6: Please verify the side installation holes based on the labels in the image. All of these holes require rivet installation, so you will need to perform the same riveting procedure as described in step 2 for the three holes.
• Step 7: After installing the rivets, you can proceed to install our rear fender flare. Secure it in place using M6*35 screws for all holes.
• Step 8: Repeat the same procedure on the passenger side.
• Step 9: Please read the front fender flare lighting wiring installation below and follow those steps to connect the wire harness.
• Step 10: The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!

Attention:

1. The product parts in this instruction may differ slightly from the actual product contents but generally do not affect the installation of the product.
2. Please feel free to contact your distributor if you have any kind of questions about your purchase.