SENA ST1 Spider Motorcycle Mesh Communication System User Guide
Downloadable Sena Software
Download the Sena Motorcycles App at Google Play Store or App Store
Sena Motorcycles
- Device configuration
- Over-The-Air (OTA) Firmware Update
Download the following items at sena.com.
Sena Device Manager
- Firmware upgrade
- Device configuration setting
Quick Start Guide, User’s Guide
Follow us on Facebook, YouTube, Twitter and Instagram to check the latest information and helpful tips.
Product Details
Installation
- For more information about installation, refer to the User’s Guide
Using the Clamp Unit
Using the Glued Surface Mounting Plate
Installing the Speakers
Installing the Wired Boom Microphone
Installing the Wired Microphone
Mesh Intercom Antenna
Pull the Mesh Intercom Antenna outwards slightly to unfold it.
NOTICE
- This Quick Start Guide (Version 2.0.0 or higher) explains how to operate the SPIDER ST1 with firmware version 2.0.0 or higher.
- For operating the SPIDER ST1 with a firmware version lower than 2.0.0, refer to the SPIDER ST1 Quick Start Guide that is available when you connect the SPIDER ST1 to the Sena Motorcycles App
Icon Legen
Tap button/Jog Dial the specified number of times
Press and Hold button/Jog Dial for the specified amount of time
Rotate Jog Dial clockwise (right) or counterclockwise (left).
Rotate while Pressing Jog Dial clockwise (right) or counterclockwise (left).
“Hello” Audible prompt
Basic Operations
Powering On
Powering Off
Volume Up
Volume Down
Checking the Battery Level
Powering On
and “
Battery level is high/medium/low
Phone Pairing
Blinking
“Phone pairing”
Select SPIDER ST1 in the list of Bluetooth devices detected.
- The headset will enter the Phone Pairing mode automatically when you initially turn on the headset.
- For more information on phone pairing, refer to the User’s Guide.
Using the Phon
Answer a Call
End a Call
Reject a Call
Call a Voice Assistant
Music Control
Play/Pause
Track Forward
Track Backwar
Mesh Intercom™
Open Mesh™: communication within the same channel.
Group Mesh™: communication within the same private group.
- For more information on Mesh Intercom, refer to the User’s Guide
Mesh Intercom On
Blinking
“ Mesh intercom on, Open Mesh, channel 1”
Mesh Intercom Off
“ Mesh intercom off”
Note: When Mesh Intercom is on, the SPIDER ST1 will automatically connect to nearby SPIDER ST1 users and the headset will be in Open Mesh (default: channel 1) initially
Open Mesh
Channel Setting (Default: channel 1) in Open Mesh
Using the Button
- Enter into the Channel Setting.
“ Channel setting, 1”
- Navigate between channels.
(1 2 ••• 8 9 Exit 1 •••)
“ #” - Save the channel
Using the Sena Motorcycles App”
You can select the channel through the Sena Motorcycles App.
Group Mesh
Group Mesh is a closed group intercom function that allows users to join, leave, or rejoin a group intercom conversation without pairing each headset.
Creating a Group Mesh
Creating a Group Mesh requires two or more Open Mesh users.
Open Mesh
Group Mesh
- Users (You, B, and C) enter into Mesh Grouping to create a Group Mesh.
Mesh grouping” - When Mesh Grouping is completed, the users (You, B and C) will hear a voice prompt on their headset as Open Mesh switches to Group Mesh.
“ Group Mesh”
Joining an Existing Group Mesh
One of the current users in an Existing Group Mesh can allow new users (one or more) in Open Mesh to join the Existing Group Mesh.
Existing Group Mesh
Open Mesh
Existing Group Mesh
- One (You) of the current users in the Existing Group Mesh and new users (D and F) in Open Mesh enter into Mesh Grouping to join the Existing Group Mesh.
“ Mesh grouping” - When Mesh Grouping is completed, the new users (D and F) will hear a voice prompt on their headset as Open Mesh switches to Group Mesh.
“ Group Mesh”
Enable/Disable Mic (Default: Enable)
Users can enable/disable the microphone when communicating in a Mesh Intercom.
Mesh Reach-Out Request
You (caller) can send a request message to turn on the Mesh Intercom to nearby friends who have it turned off.
- If you want to send or receive a request massage, you need to enable Mesh Reach-Out on the Sena Motorcycles App.
- While your headset’s Mesh Intercom is on, you (caller) send a request message using the headset’s Button or the Sena Motorcycles App
[Caller]
[Caller] “Mesh reach-out request”
[Nearby Friends] “ Mesh intercom requested”
- Friends who receive the request message need to manually turn on their Mesh Intercom using the headset’s Button or the SenaMotorcycles App
Reset Mesh
If a headset in an Open Mesh or Group Mesh resets the Mesh, it will automatically return to Open Mesh (default: channel 1).
Accessing the Configuration Menu
“ Configuration menu”
Navigating Between Menu Options
Execute Menu Options
Troubleshooting
Factory Reset
Factory reset”
“ Headset reset, good-bye”
Fault Reset
Note: Fault Reset will not restore the headset to the factory default settings.
Quick Reference
| TYPE | OPERATION | BUTTON COMMANDS |
 Basic Operations |
Power on/ Power off |  |
| Volume up/Volume down |  |
|
 Mobile Phone |
Answer phone call |  |
| End phone call | |
|
| Reject phone call |  |
|
| Call a Voice Assistant | |
|
 Music |
Play/Pause music |  |
| Track forward |  |
|
| Track backward |  |
| TYPE | OPERATION | BUTTON COMMANDS |
 Mesh Intercom™ |
Mesh Intercom on/off |  |
| Channel setting |  |
|
| Mesh Grouping |  |
|
| Enable/Disable Mic |  |
|
| Mesh Reach-Out Request |  |
|
| Reset Mesh |  |
Sena Technologies Co., Ltd.
Customer Support: sena.com
Documents / Resources
 |
SENA ST1 Spider Motorcycle Mesh Communication System [pdf] User Guide ST1 Spider Motorcycle Mesh Communication System, ST1, Spider Motorcycle Mesh Communication System, Motorcycle Mesh Communication System, Mesh Communication System, Communication System, System |
SENA 