Commercial Electric 1009 812 700 Series Round LED Flush Mount Ceiling Light User Guide

Commercial Electric Logo

SKU #1009 812 749
Model #FM11LP6WYMMNKHD
SKU #1009 812 751
Model #FM15LP6WYMMNKHD
SKU #1009 812 748
Model #FM11LP6WYMMBKHD
SKU #1009 812 750
Model #FM15LP6WYMMBKHD

USE AND CARE GUIDE

ROUND LED FLUSH MOUNT CEILING LIGHT
WITH OPTIONAL MOTION FEATURE

1009 812 700 Series

Questions, problems, missing parts? Before returning to the store,
call Commercial Electric Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.COM

THANK YOU
We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this LED round ceiling light.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Commercial Electric!

Safety Information

For your safety, always remember to:

  • Turn off the power supply at the fuse or circuit breaker box before you install the fixture.
  • Double-check all connections to be sure they are tight and correct.
  • Wear rubber soled shoes and work on a sturdy wooden ladder.
  • Account for small parts and destroy packing material, as these may be hazardous to children.

This fixture is designed for use in a circuit protected by a fuse or circuit breaker It is also designed to be installed in accordance with local electrical codes If you are unsure about your wiring, consult a qualified electrician or local electrical inspector, and check your local electrical code.

FCC STATEMENT

This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help Warning: Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

RADIATION EXPOSURE STATEMENT

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.

PRODUCT SPECIFICATIONS:

  • 120VAC, 60Hz
  • Dimmable
  • Suitable for damp locations

WarningWARNING: RISK OF SHOCK. House electric current can cause painful shock or serious injury unless handled properly.

NOTICE: All electrical connections must be in accordance with local and National Electrical Code (N E C ) standards If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician.

Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.

WarningWARNING: Risk of fire Before installing your lighting fixture, thoroughly review enclosed installation manual. If you do not have sufficient electrical wiring experience, please refer to a do-it-yourself wiring handbook or have your fixture installed by a qualified licensed electrician All electrical connections must be in accordance with Local and National Electrical Code (NEC) Standards Reliable operating temperature is -13˚ F to 113˚ F (-25˚ C to 45˚ C). If flickering occurs in low level dimming, increase light level.

Supplier’s Declaration of Conformity:
47 CFR § 2 1077 Compliance Information
Responsible Party: Feit Electric Company
4901 Gregg Road, Pico Rivera, CA 90660, USA 562-463-2852
Unique Identifier: Commercial Electric Round Led Flush Mount Ceiling Light

Warranty

This product is warranted to be free from defects in workmanship and materials for up to 5 years from date of purchase. If it fails to do so, please contact the Customer Service Team at 1-877-527-0313 or visit www.HomeDepot.com.

Pre-Installation

TOOLS REQUIRED

Tools Required

HARDWARE INCLUDED

NoteNOTE: Hardware not shown to actual size.

Hardware Included

J-Box Installation

  1. Turning Off the Power
    • Turn the power OFF at the switch and fusebox or the circuit breaker.
    • Remove the existing trim if present.
  2. Identifying the wires
    • Live voltage – Black, Neutral – White, Ground – Bare, Copper.
      J-Box Installation Figure 1
  3. Installing the Mounting Bracket to the Junction Box
    • Feed the junction box wires through the center of the mounting bracket (BB).
    • Attach the mounting bracket (BB) to the junction box using the two junction box mounting screws (CC).
      J-Box Installation Figure 2
  4. Connecting the wires
    • Use the wire nuts (DD) to connect the ground wire (green) coming out of the fixture (BB) to the house ground wire (usually green).
    • Use the wire nuts (DD) to connect the black line wire coming out of the fixture to the line wire (usually black) coming from the junction box.
    • Use the wire nuts (DD) to connect the white neutral wire coming out of the fixture to the neutral wire (usually white) coming from the junction box.
      J-Box Installation Figure 3
      Note NOTE: Before installation check the back of the fixture and select desired CCT and motion option. See pages 5 and 6 for additional information.
  5. Installing the fixture
    • Secure the fixture (AA) to the mounting bracket (BB) by pressing the fixture into the mounting bracket until the clips on the fixture engage together. Make sure the fixture is firmly locked into place.
      Note NOTE: Tuck the wires into the junction box neatly to create enough space for the wire enclosure to fit in without obstruction.
      J-Box Installation Figure 4

Changing Color Settings

Changing Color Settings

  1. When the slide switch is set to 3000K, the color temperature is set to Soft White.
  2. When the slide switch is set to 3500K, the color temperature is set to Neutral White.
  3. When the slide switch is set to 4000K, the color temperature is set to Bright White.
  4. When the slide switch is set to 5000K, the color temperature is set to Daylight.
  5. When the slide switch is set to 6500K, the color temperature is set to Daylight Deluxe.
  6. When the slide switch is set to SWITCH, the color temperature can be changed from 3000K, 3500K, 4000K, 5000K and 6500K with your existing light switch.
  7. To change color temperatures using your existing light switch:
    A. Set the slide switch on the back of the fixture to SWITCH.
    B. Toggle your light switch ON and OFF within 0.5-3 seconds to cycle though the 5 different color temperatures.
    C. The fixture will remember the last color temperature selected after the fixture has been on a selected color temperature for 10 seconds and eventually turned off. To maintain selected color, do not toggle switch as detailed in the prior step, but leave off for 10 seconds. The next time the fixture is turned on, the fixture will emit the last color temperature selected. Soft White (3000K) Neutral White (3500K) Bright White (4000K) Daylight (5000K) Daylight Deluxe (6500K) SWITCH
  8. The reset function is used when using multiple Color Selectable lighting products operating from the same light switch. In the event multiple fixtures are not displaying the same color at the same time, fixtures must be RESET using your existing light switch. Simply toggle the wall switch ON and OFF 7 times quickly. For best results, cycle ON/OFF 7 times within 5-10 seconds.

Motion Sensor

NoteNOTE: All distances are measured from the motion sensor located in the center of the fixture.

NoteNOTE: Recommended installation height is 8-9 ft.

NoteNOTE: The fixture uses microwave motion sensor, do not install within 5ft of router or other wifi source.

SENSOR DETECTION

Motion is off by default; if motion detection is desired, select range via range selector switch which can be adjusted to multiple ranges to fit users need by using the switch on the back of the fixture. Once the sensor detects motion, the light will remain on and will automatically turn off if no motion is detected after 5 minutes.

Range Selector Switch Settings

Range Selector Switch Settings

Approximate radius determined by the switch on the back of the fixture

Approximate radius determined by the switch on the back of the fixture

Troubleshooting

Troubleshooting

Color Chart

Color Chart

HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.

Documents / Resources

Commercial Electric 1009 812 700 Series Round LED Flush Mount Ceiling Light [pdf] User Guide
FM11LP6WYMMNKHD, FM15LP6WYMMNKHD, FM11LP6WYMMBKHD, FM15LP6WYMMBKHD, 1009 812 700 Series Round LED Flush Mount Ceiling Light, 1009 812 700 Series, 1009 812 700 Series LED Flush Mount Ceiling Light, Round LED Flush Mount Ceiling Light, LED Flush Mount Ceiling Light, LED Flush Mount Light, Ceiling Light, Light
Commercial Electric 1009 812 700 Series Round LED Flush Mount Ceiling Light [pdf] User Guide
FM11LP6WYMMNKHD, FM15LP6WYMMNKHD, FM11LP6WYMMBKHD, FM15LP6WYMMBKHD, 1009 812 700 Series Round LED Flush Mount Ceiling Light, 1009 812 700 Series, 1009 812 700 Series Flush Mount Ceiling Light, Round LED Flush Mount Ceiling Light, Flush Mount Ceiling Light, Flush Mount Light, Ceiling Light, Light

References

Leave a comment

Your email address will not be published. Required fields are marked *