MCG-14080 Edge Pro Cellular Trail
Camera User Guide
BEFORE YOU BEGIN
Download the Moultrie Mobile app to set up your camera, remotely control settings, view your pictures and videos, and more.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries.
App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc.
TO GET STARTED, YOU’LL NEED:
Note: This camera has built-in memory. You do not need to purchase or install an SD card.
CAMERA SETUP
SEE HOW IT’S DONE
Scan the QR code to watch a video of the camera overview and step-by-step instructions for camera setup.
Need help?
Call Customer Success: 1-844-908-1219
- ADD CAMERA TO ACCOUNT
• Download the Moultrie Mobile app, and log in or sign up for an account.
• For existing accounts, go to DEVICES > ACTIVATE.
• Scan the QR code on the camera (located inside control panel door).
• Select a monthly or annual plan. - INSTALL BATTERIES
• Press EJECT to release battery tray.
• Fill tray with either 8 or 16 AA batteries. (Minimum of 8 required)
• If only using 8 batteries, completely fill one side.
NOTE:
• Only use recommended AA batteries: Moultrie Alkaline, Energizer Alkaline, or Energizer Lithium
• Compatible with Edge Series Rechargeable Battery
• Do not use rechargeable AA batteries, mix battery types, mix old and new batteries, or mix different battery brands
- TURN ON YOUR CAMERA
• Slide the power switch to ON. All LEDs will light up and then camera will automatically connect to the strongest network in your area.
CONNECTING
Flashes yellow as the camera connects.
CONNECTED
Turns green upon successful connection.
NOT CONNECTED
Turns red if connection is not found.NOTE:
• Camera activation and connection should take 5 minutes or less. If a firmware update is available after connection, LEDs will flash and the camera will power itself off and back on.
• If not connected, you may need to move your camera to a stronger signal area.
• All lights will turn off once the camera is on and connection attempt is complete.
- PAIRING YOUR SMARTPHONE
• Press and hold the CONNECT button for 3 seconds to initiate new smartphone pairing. Bluetooth™ LED will begin flashing while pairing.
BLUETOOTHFlashes blue while pairing. Turns solid blue upon successful connection.
NOTE:
• Pairing mode initiates and attempts connection for 2 minutes, then powers off. - TEST YOUR CAMERA
• Once the camera is on and has connected, press the CONNECT button to trigger a test photo, or use the LIVE AIM feature in the app.
• In the Moultrie Mobile app, go to GALLERY, then pull down to refresh and see your photo.
• For more on monitoring your camera’s status see the Adjust Camera Settings section on page 7.
FALSE TRIGGER ELIMINATION
 |
SMART CAPTURE Identify and capture only the species that matter to you. |
 |
SMART ZONES Selective triggering based on custom detection zones |
 |
SMART TRIGGER Self learning A.I. technology reduces false triggers |
ADDITIONAL FEATURES
 |
NYXEL ® NIR Near Infrared (NIR) technology uses less power and allows for clearer low light images |
 |
LIVE AIM A live look at the camera’s field of view via Bluetooth connection on your smart phone |
- Auto Connect technology detects and connects to the strongest nationwide cellular network.
- Built-in memory replaces the need for an SD card.
- Cellboost ™ antenna comes preinstalled and folds for easy storage.
- Multiple capture modes including scheduler and timelapse.
CAMERA PLACEMENT TIPS
- Clear vegetation and tree limbs in the field of view to reduce false triggers.
- Mount camera to a tree or pole approximately three to five (3-5) feet from ground.
- Face the camera North or South to avoid over- exposure from the sun.
- When scouting a game trail, angle the camera at a 45-degree angle to the trail for optimal triggering.
Visit MoultrieMobile.com for additional camera mounting options.
ADJUST CAMERA SETTINGS
You can view your camera’s battery level and adjust settings remotely using the Moultrie Mobile app.
- Go to DEVICES to adjust settings and save changes.
- If you change settings from the app, the changes will be applied the next time the camera connects.
- To sync new settings faster, press CONNECT button on the camera to initiate a connection after updating settings in the app.
ACCESSORIES
Go to MoultrieMobile.com/accessories to purchase solar power products, camera mounts and other accessories.
TROUBLESHOOTING
CAMERA WON’T CONNECT
If the red NOT CONNECTED light is on:
- Make sure camera has an active subscription with Moultrie Mobile.
- Move the camera to a location with a stronger signal.
COMPARING TO CELL PHONE SIGNAL
Your camera’s signal strength is not tied to your cell phone plan and may be higher or lower than your smartphone. Edge Pro will function with a weaker signal than your smartphone and will automatically try to connect to the strongest network in your area.
MANAGING IMAGES / MEMORY
- All pictures and downloads can be viewed and managed in the Moultrie Mobile app, even if they have been cleared from the camera’s memory.
- PRO TIP: Request hi-res images and full video clips soon after they appear in your gallery, to avoid those files being deleted during onboard memory clean-up.
NEED HELP?
For resources, troubleshooting,
and support, go to: Support.MoultrieMobile.com
Customer Success: 1-844-908-1219
WARRANTY
- This product has been thoroughly tested and inspected before shipment. It is guaranteed from defects in material and workmanship from the date of purchase for 2 years.
- Under this limited guarantee, we agree to replace or repair free of charge any part or parts which have been found to be defective in original material or workmanship.
- Physical damage, abuse, misuse, alterations, or tampering with the equipment is not covered and will void your warranty.
- For more warranty information, visit: MoultrieMobile.com/2022_MM_Warranty_Info
- Should you require warranty service, call our Customer Success Team: 1-844-908-1219
FCC Statements
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
This device complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes and modifications not expressly approved by the party responsible could void the user’s authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Product Marketing Name (PMN)：EDGE PRO FCC ID: 2AJQ6MCG-14080 IC ID: 27066-MCG-14080
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with FCC RF exposure compliance requirements, this grant applies to only Mobile Configurations. The antennas used for the transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
ISED Notice
This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.This Class B digital apparatus complies with Canadian ICES-003.ISED Radiation Exposure Statement
This device complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the ISED radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.
Documents / Resources
 |
MOULTRIE MCG-14080 Edge Pro Cellular Trail Camera [pdf] User Guide MCG-14080 Edge Pro Cellular Trail Camera, MCG-14080, Edge Pro Cellular Trail Camera, Cellular Trail Camera, Trail Camera, Camera |
References
-
Cellular Trail Cameras & Accessories | Moultrie Mobile
-
Trail Camera Accessories, Mounts & SD Cards | Moultrie Mobile
- User Manual