ALLDATA H4DO Thermo Control Valve
INSTALLATION
- When thermo control valve assembly is replaced
- Install a new gasket to the thermo control valve assembly.
- Connect the thermo control valve assembly to the water hose {A), water hose {B) and water hose {C), and install the bolts that hold the thermo control valve assembly. Tightening torque:
16 N·m {1.6 kgf-m, 11.8 ft-lb) - Connect the preheater hose {D).
- When thermo control valve assembly is not replaced
- Connect each new hose to the thermo control valve assembly.
{A) Water hose
(C) Water hose
{D) Preheater hose
{B) Water hose - Install a new gasket to the thermo control valve assembly.
- Connect the water hose {A), water hose {B) and water hose {C), and install the bolts that hold the thermo control valve assembly.
Tightening torque:
16 N·m (1.6 kgf-m, 11.8 ft-lb)
- Connect each new hose to the thermo control valve assembly.
- Install the engine wiring harness stay.
Tightening torque:
19 N·m (1.9 kgf-m, 14.0 ft-lb) - Connect the connector (A) and connector (B).
- Install the clip (A), clip (B) and clip (C) and install the bolt securing the engine ground and the harness case.
Tightening torque:
19 N·m (1.9 kgf-m, 14.0 ft-lb) - Install the high-pressure fuel delivery pipe assembly. Ref. to FUEL INJECTION (FUEL SYSTEMS)(H4DO)>High Pressure Fuel Delivery Pipe>INSTALLATION > HIGH-PRESSURE FUEL DELIVERY PIPE ASSEMBLY.
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE > BATTERY.
- Fill engine coolant. Ref. to COOLING(H4DO)>Engine Coolant>REPLACEMENT > FILLING OF ENGINE COOLANT.
Documents / Resources
ALLDATA H4DO Thermo Control Valve [pdf] Installation Guide H4DO, H4DO Thermo Control Valve, Thermo Control Valve, Control Valve, Valve |