ELITE-SCREENS-LOGO

ELITE SCREENS Yard Master Plus Series Indoor Outdoor Portable Projection Screen

ELITE-SCREENS-Yard-Master-Plus-Series-Indoor-Outdoor-Portable-Projection-Screen-PRODUCT

Specifications

  • Models: 100 (16:9), 120 (16:9), 135 (16:9), 145 (16:9), 180 (16:9), 200 (16:9)
  • Knob Screw Support Leg: 8 pcs (N/A), 8 pcs (N/A), 10 pcs (Included), 10 pcs (Included), 10 pcs (Included), 14 pcs (Included)
  • Max Height: 95.5 inches, 112.2 inches, 113 inches, 133.5 inches, 159.8 inches, 149.6 inches

Product Description

The Yard Master Plus portable projection screen is designed for both indoor and outdoor use. It provides a high-quality projection surface for optimal viewing results. The screen is suitable for front projection and comes with a folding frame, folding legs, projection screen material, carrying bag, rope, eyebolts, and ground stakes.

Hardware and Parts List

  • Folding frame x1
  • Left and right folding legs x2
  • Knob Screw (Refer to Chart)
  • Projection screen material x1
  • Screen material bag x1
  • Carrying Bag x1
  • Rope
  • Eyebolt x2
  • Ground stake x4

Frame Assembly:

  1. Take the folding frame (A) out of the carrying bag (F) and place it on a flat surface.
  2. Fully unfold the longer sections of the frame first.
  3. Unfold the frame until the latch on the hinge clicks into place.
  4. Repeat the procedure for the shorter sections of the frame.

Screen Material Attachment:

  1. Take the screen material (D) out of the screen material bag (E) and align the corners of the screen material with the inside corners of the frame.
  2. Once the screen material is fully extended, secure it by snapping the buttons onto the frame studs.
  3. Fasten the buttons in the following order: Snap the buttons on each corner first, then work your way out to the center on each side. Refer to Fig.1 for button placement.

Leg Attachment for 100/120 Models:

  1. Take the left and right folding legs (B) out of the carrying bag (F) and place them on a flat surface.
  2. Unfold the left and right legs, ensuring that the front foot is folded.
  3. Make sure the hinges click into place.
  4. Lay the frame on the floor and position the legs over both sides of the frame.
  5. Use the knob screws (C) to attach the frame to the legs.
  6. Ensure that the top of each leg is screwed into the last hole
    of the frame to reach maximum height. Attaching the legs lower and leaving extra space on top may cause the screen to tip over when assembled.
  7. After securing the legs to the frame, lift the screen up in a vertical position with the help of two people.
  8. While the screen is in a vertical position, fold out the front feet of the legs.

FAQ

Q: Can I use the Yard Master Plus screen for rear projection?

A: No, the Yard Master Plus screen is designed for front projection only.

Q: How do I clean the projection surface?

A: To clean the projection surface, gently wipe it with a soft, lint-free cloth. Avoid using harsh chemicals or abrasive materials that may damage the screen material.

Q: Can I use the Yard Master Plus screen in windy conditions?

A: Yes, the Yard Master Plus screen comes with ground stakes and ropes for added stability in outdoor environments. Make sure to properly secure the screen to prevent it from tipping over.

Thank you for choosing the Yard Master Plus portable projection screen! Please read through this user guide before utilizing the screen. Correct usage and maintenance will ensure a long product life.

Care & Use Instructions

  • Elite Screens highly recommends two people to assemble the Yard Master Plus screen.
  • Dust, dirt and scratches on the projection surface will affect the picture quality, please take note of the points

below to prevent that from occurring

  1. Do not touch the projection surface with your hands
  2. Do not write or draw on the projection surface
  3. Do not use fingers or sharp objects to point on the projection surface; this will damage the screen material.
  4. Use a soft-damp cloth to clean the projection surface; do not use chemical cleaning agents or alcohol.
  5. Use clean water when dampening the cleaning cloth and do not rub against the material to clean it.
  • After using the screen, disassemble it and store it in the carrying bag provided.
  • To avoid damage and injury, the screen should only be operated by adults.

Product Description

Design: The aluminum frame is designed to be light weight and easily operated making it easy to carry, assemble and disassemble.

Screen Fabric: The screen fabric is attached to the rectangular frame and held in place by several press stubs, which ensure an evenly stretched and flat surface. The CineWhite® (front projection) screen material is durable and can be folded many times without causing damage or distortion to the surface.

Correct usage of the projection screen will ensure better viewing results.
For front projection, assemble and view the screen as indicated in Fig.1.

ELITE-SCREENS-Yard-Master-Plus-Series-Indoor-Outdoor-Portable-Projection-Screen-FIG-1

Hardware and Parts List

ELITE-SCREENS-Yard-Master-Plus-Series-Indoor-Outdoor-Portable-Projection-Screen-FIG-2

Frame Assembly

  1. Take the folding frame (A) out of the carrying bag (F) and place it on a flat surface. Fully unfold the longer sections first, as shown below.

    ELITE-SCREENS-Yard-Master-Plus-Series-Indoor-Outdoor-Portable-Projection-Screen-FIG-3

  2. Next, unfold the frame until the latch on the hinge “clicks” into place. Repeat the procedure for the shorter sections, as shown below.

    ELITE-SCREENS-Yard-Master-Plus-Series-Indoor-Outdoor-Portable-Projection-Screen-FIG-4
    Note: When unfolding the frame and legs, be sure the latches on the hinges “click” into place. Please also make sure all 4 corners of the frame are at a 90° angle and the hinged support bar is straight and not bent.

    ELITE-SCREENS-Yard-Master-Plus-Series-Indoor-Outdoor-Portable-Projection-Screen-FIG-5

Screen Material Attachment

  1. Take the screen material (D) out of the screen material bag (E) and align the corners of the screen material with the inside corners of the frame.

    ELITE-SCREENS-Yard-Master-Plus-Series-Indoor-Outdoor-Portable-Projection-Screen-FIG-6

  2. Once the screen material is fully extended, secure the material by snapping the buttons onto the frame studs. Fasten the buttons in the following order as shown on Fig.1.
    Note: Snap the buttons on each corner first, then work your way out to the center on each side.

    ELITE-SCREENS-Yard-Master-Plus-Series-Indoor-Outdoor-Portable-Projection-Screen-FIG-7

Leg Attachment for 100”/ 120” Models

  1. Carefully take the left and right folding legs (B) out of the carrying bag (F) and place it on a flat surface. Unfold the left and right legs leaving the front foot folded as shown below. Make sure the hinges click into place.
    Warning: The additional support sections, located at the middle section of the legs, may unfold on its own. Please be sure to use caution while removing/placing the legs from/to the bag
  2. Once the legs are unfolded, lay the frame on the floor and position the legs over both sides of the frame. Use the knob screws (C) to attach the frame to the legs.
    Warning: When attaching the legs, make sure to screw the top of the leg to the last hole of the frame to reach max height. Attaching the legs lower to the frame and leaving an extra space on top may cause the screen to tip over when assembled.

    ELITE-SCREENS-Yard-Master-Plus-Series-Indoor-Outdoor-Portable-Projection-Screen-FIG-8

  3. After making sure the legs are secure to the frame, using two people, lift the screen up in a vertical position. While the screen is in a vertical position, fold the front feet of the legs out.

    ELITE-SCREENS-Yard-Master-Plus-Series-Indoor-Outdoor-Portable-Projection-Screen-FIG-9

  4. The assembly is now complete, and the projection screen will be stable on a flat surface.

Leg Attachment for 135” – 200” Models

  1. Starting from step 2 on the previous procedure, lay the frame on the floor and position the legs over both sides of the frame. Use the knob screws (C) to attach the frame to the legs.

    ELITE-SCREENS-Yard-Master-Plus-Series-Indoor-Outdoor-Portable-Projection-Screen-FIG-10
    Warning: When attaching the legs, make sure to screw the top of the leg to the last hole of the frame to reach max height. Attaching the legs lower to the frame and leaving an extra space on top may cause the screen to tip over when assembled.

  2. Next, carefully unfold the extra support leg behind the leg and attach it securely using a knob screw (C). Then repeat steps 3 and 4 on the previous procedure.

    ELITE-SCREENS-Yard-Master-Plus-Series-Indoor-Outdoor-Portable-Projection-Screen-FIG-11

Height adjustable frame feature

The Yard Master Plus allows for the main frame to be set at various height settings at 5.9” intervals.

  1. Step 1: Lay the frame on a clean sheet to avoid damaging the projection surface. Then lay the legs over on the back of the frame in the position desired.

    ELITE-SCREENS-Yard-Master-Plus-Series-Indoor-Outdoor-Portable-Projection-Screen-FIG-12

  2. Step 2: Once you have aligned the leg’s holes with the frame’s holes, secure with the knob screws.

    ELITE-SCREENS-Yard-Master-Plus-Series-Indoor-Outdoor-Portable-Projection-Screen-FIG-13

Screen Disassembly

  1. After using the screen, disassemble and store it in the carrying bag (F). To disassemble the screen, follow the assembly procedure in reverse order.
  2. Store the screen in the provided carrying bag (F). Be sure to place folding frame, legs, and smaller parts into the carrying bag first and place the material on top to keep material from creasing or tearing.
    For more information, technical support or your local Elite Screens contact, please visit www.elitescreens.com 

Documents / Resources

ELITE SCREENS Yard Master Plus Series Indoor Outdoor Portable Projection Screen [pdf] User Guide
Yard Master Plus Series Indoor Outdoor Portable Projection Screen, Yard Master Plus Series, Indoor Outdoor Portable Projection Screen, Outdoor Portable Projection Screen, Portable Projection Screen, Projection Screen, Screen

References

Leave a comment

Your email address will not be published. Required fields are marked *