Lazada FF11-F Solar Body Sensor Light User Manual

SOLAR BODY SENSOR LIGHT
User’s manual

FF11-F Solar Body Sensor Light

1. Fix plastic expansion tube to the wall.
2. Press and hold the switch for 3 seconds.
3. Hang the light fixture and tighten the screws.

Brief introduction

1. This product is an energy-saving solar energy product that can be installed conveniently.
2. Widely used in the courtyard, trails. gardens and some place where are inconvenient to connect electricity for illumination.
3. Easy installation: fxed installation. There is no need to install any wiring or other complicated installation procedures.
4. The solar automatic storage system is used to absorb light energy through a solar panel, generate electrical energy through a photoelectric conversion effect, and then use the electrical energy to charge the battery, and then use the power of the battery to drive the LED to emit light.
5. When the solar panel is illuminated, the circuit stops working and the button is inactive; when the solar panel has no lamp, the circuit starts to work, which is the light sense control.
6. In the evening, when people walk around, they don’t need any manual control to sense the lighting. This is human induced control.
7. Energy saving, when no one is in the sensing area, the light will automatically turn off or darken according to the adjusted mode.

Parameters

1. Solar panel: 5.5V / 1W
2. Battery: 18650 lithium battery 3.7V / 2200mAh
3. LED quantity: 38pcs
4. Rated power: 2W
5. light quantity: 180Im

Product performance

1. During solar charging during the day, the lights will automatically turn off, when night, the lights will automatically start and work automatically.
2. Each press of a button will replace a ight mode, switch circularly.
   (A). Power on: Press and hold the button to enter the first mode.
   (B). Human body induction mode: when someone comes, the light will strong, when no one comes, the light will tum off.
   (C). Human body sensing + low light mode: light when someone comes in, but low light when no one is in.
   (D). Light sensing mode: it will always light at night, no induction function.
   (E). Shutdown
3. It will work according to the installed mode every day no need to switch again.
4. In fine weather, the batteries can be fled within 7-8 hours. The delay time for a strong light is 15 seconds when someone is nearby. When in the induction area, the light is always bright, and when the person leaves the induction area for 15 seconds, the light enters into the power saving mode.

Additional remarks.

1. Please note that due to solar products, the sun exposure time is closely related to the local weather conditions and the installation location and direction. The actual solar panel charging effect depends on the duration of the light and the weather. The stronger the sunlight, the faster the charging. The longer the lighting time, the more charging. More, the charging effect is weakened on rainy days, and the lighting time is shortened.
2. This product does not require a battery replacement. Due to the battery, if the product is disposed of, the product should not be placed in a fire to prevent an explosion.
3. This product’s lampshade adopts plastic injection molding materials, which shouldn’t generate lampshade rupture by littering or dropping.

Documents / Resources

Lazada FF11-F Solar Body Sensor Light [pdf] User Manual FF11-F Solar Body Sensor Light, FF11-F, Solar Body Sensor Light, Body Sensor Light, Sensor Light, Light

References

• User Manual